From Clogging Mitigation to Clogging Acceleration: Particle Deposition Under Oscillatory Flow in Microfluidic Porous Media
Abstract
Particle deposition and clogging in porous media control the performance of many natural and engineered applications, including groundwater filtration, geothermal injection, and subsurface fluid management. Once deposits form, permeability progressively declines and flow pathways become blocked, making mitigation strategies essential for maintaining long-term operation. Oscillatory injection has been proposed as a potential strategy to delay clogging, yet how its effectiveness depends on physicochemical conditions and complex pore geometries remains poorly understood. Here, we use microfluidic experiments with colloidal suspensions to investigate how oscillatory flow modulates particle transport and clogging in tortuous porous domains. Controlled oscillatory forcing is applied over a range of frequencies while monitoring permeability evolution and deposition dynamics. Under saline conditions, oscillatory flow delays clogging and increases the injected volume before hydraulic failure with increasing frequency, consistent with electrostatic screening that promotes particle aggregation and allows cyclic pressure fluctuations to destabilize growing deposits intermittently. However, the frequency response changes with physicochemical conditions and can even reverse. As ionic strength decreases and electrostatic interactions become stronger, aggregation is suppressed, and clogging becomes increasingly governed by particle crowding and pore bridging, where higher-frequency oscillations can instead accelerate blockage. These findings demonstrate that oscillatory injection does not have a universal effect on clogging, but instead depends on the balance between hydrodynamic forcing and particle interactions. This regime-dependent behavior provides a basis for designing more effective injection strategies in porous media.
Related
- When and why does CO2 mineralization in basalts stall? A critical review of microscale passivation, pore-clogging mechanisms and the multiscale imaging needed to resolve them
- Arctic climate tipping points under delayed CO2 emissions mitigation
- Design meets simplicity: employing anhydrous precursors in microwave synthesis of NaGdF₄:Yb³⁺,Tm³⁺ upconverting nanoparticles and their deposition inside mesoporous titania or silica thin films through spin-coating
- Associations of Organophosphate Pesticide Metabolite Mixtures with Epigenetic Age Acceleration
- Kinetic acceleration of phosphate remediation in dilute aquatic environments via photovoltaic-driven solid-state electrolyte electrocoagulation
BibTeX
@article{okaybi2026from,
title = {{From Clogging Mitigation to Clogging Acceleration: Particle Deposition Under Oscillatory Flow in Microfluidic Porous Media}},
author = {Walid Okaybi and Sophie Roman and Cyprien Soulaine},
journal = {Transport in Porous Media},
year = {2026},
month = may,
doi = {10.1007/s11242-026-02318-0},
url = {https://insu.hal.science/insu-05750284v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - From Clogging Mitigation to Clogging Acceleration: Particle Deposition Under Oscillatory Flow in Microfluidic Porous Media
AU - Walid Okaybi
AU - Sophie Roman
AU - Cyprien Soulaine
PY - 2026
DA - 2026/05/19
JO - Transport in Porous Media
DO - 10.1007/s11242-026-02318-0
UR - https://insu.hal.science/insu-05750284v1
AB - Particle deposition and clogging in porous media control the performance of many natural and engineered applications, including groundwater filtration, geothermal injection, and subsurface fluid management. Once deposits form, permeability progressively declines and flow pathways become blocked, making mitigation strategies essential for maintaining long-term operation. Oscillatory injection has been proposed as a potential strategy to delay clogging, yet how its effectiveness depends on physicochemical conditions and complex pore geometries remains poorly understood. Here, we use microfluidic experiments with colloidal suspensions to investigate how oscillatory flow modulates particle transport and clogging in tortuous porous domains. Controlled oscillatory forcing is applied over a range of frequencies while monitoring permeability evolution and deposition dynamics. Under saline conditions, oscillatory flow delays clogging and increases the injected volume before hydraulic failure with increasing frequency, consistent with electrostatic screening that promotes particle aggregation and allows cyclic pressure fluctuations to destabilize growing deposits intermittently. However, the frequency response changes with physicochemical conditions and can even reverse. As ionic strength decreases and electrostatic interactions become stronger, aggregation is suppressed, and clogging becomes increasingly governed by particle crowding and pore bridging, where higher-frequency oscillations can instead accelerate blockage. These findings demonstrate that oscillatory injection does not have a universal effect on clogging, but instead depends on the balance between hydrodynamic forcing and particle interactions. This regime-dependent behavior provides a basis for designing more effective injection strategies in porous media.
SN - 0169-3913
SN - 1573-1634
ER -