Ultrafast laser–material interactions in commercial aluminium alloys: Ablation threshold, material removal mechanisms, and surface chemistry under femtosecond laser irradiation
- 1I-Form, the Research Ireland Research Centre for Advanced Manufacturing, Dublin City University, Glasnevin, Dublin 9, Ireland; DCU Institute for Advanced Processing Technology, School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, Dublin 9, Ireland
Abstract
As industries such as aerospace, automotive, and marine adopt new materials and designs, the need arises for advanced processing techniques which can shape this material while achieving required part properties. Aluminum alloys, widely used for their low weight, high strength, and corrosion resistance, still face limitations in hardness, wear resistance, and surface fouling. Surface laser processing offers a method to overcome these limitations. Specifically, femtosecond laser ablation offers a high-precision, low-defect method for surface texturing, capable of producing nano- and microscale features. This study investigates the femtosecond laser ablation threshold and material removal behavior of four aluminum alloys—99% pure Al, AA6061, AA7075, and Scalmalloy®—using a 4 W, 400 fs pulse laser at repetition rates up to 1 MHz. The results show significant variability in feature sizes, with AA6061 exhibiting the largest crater diameters depth for and pure Al displaying the greatest ablation depth (up to 4.1 μm) for the same process parameters. Increasing laser power resulted in a linear increase in ablation depth, while pulse repetition rate exhibited an inverse linear trend with depth, contrary to what would be expected from conventional laser processing. X-ray photoelectron spectroscopy (XPS) revealed that laser processing had minimal impact on surface chemistry, with aluminum oxide remaining the dominant component. Differences in physical properties, such as conductivity, reflectivity, and melting point, were identified as the key factors influencing ablation behaviour. These findings underscore the need for material-specific optimization when developing femtosecond laser-based processing techniques for aluminum alloys.
Related
- Delay-Selected Energy Coupling and Ablation Enhancement in Femtosecond Double-Pulse Irradiation of Aluminum
- Many-body Interactions in Ultrafast Spectroscopy
- Multi-Step Fast Charging of Commercial NMC/Graphite EV Pouch Cells: First-Life Extension, Degradation Mechanisms, and Second-Life Performance
- Dynamic Interactions and Deformation Mechanisms in Nanocutting of Carbon Nanotube Reinforced Ni-Based Composites
- Femtosecond laser structuring of glasses
BibTeX
@article{cholkar2026ultrafast,
title = {{Ultrafast laser–material interactions in commercial aluminium alloys: Ablation threshold, material removal mechanisms, and surface chemistry under femtosecond laser irradiation}},
author = {Abhijit Cholkar and Suman Chatterjee and Ronán McCann and Éanna McCarthy and David Kinahan and Dermot Brabazon},
journal = {Applied Surface Science Advances},
year = {2026},
month = oct,
doi = {10.1016/j.apsadv.2026.101057},
url = {https://doi.org/10.1016/j.apsadv.2026.101057},
note = {CC BY},
}
RIS
TY - JOUR
TI - Ultrafast laser–material interactions in commercial aluminium alloys: Ablation threshold, material removal mechanisms, and surface chemistry under femtosecond laser irradiation
AU - Abhijit Cholkar
AU - Suman Chatterjee
AU - Ronán McCann
AU - Éanna McCarthy
AU - David Kinahan
AU - Dermot Brabazon
PY - 2026
DA - 2026/10/24
JO - Applied Surface Science Advances
DO - 10.1016/j.apsadv.2026.101057
UR - https://doi.org/10.1016/j.apsadv.2026.101057
AB - As industries such as aerospace, automotive, and marine adopt new materials and designs, the need arises for advanced processing techniques which can shape this material while achieving required part properties. Aluminum alloys, widely used for their low weight, high strength, and corrosion resistance, still face limitations in hardness, wear resistance, and surface fouling. Surface laser processing offers a method to overcome these limitations. Specifically, femtosecond laser ablation offers a high-precision, low-defect method for surface texturing, capable of producing nano- and microscale features. This study investigates the femtosecond laser ablation threshold and material removal behavior of four aluminum alloys—99% pure Al, AA6061, AA7075, and Scalmalloy®—using a 4 W, 400 fs pulse laser at repetition rates up to 1 MHz. The results show significant variability in feature sizes, with AA6061 exhibiting the largest crater diameters depth for and pure Al displaying the greatest ablation depth (up to 4.1 μm) for the same process parameters. Increasing laser power resulted in a linear increase in ablation depth, while pulse repetition rate exhibited an inverse linear trend with depth, contrary to what would be expected from conventional laser processing. X-ray photoelectron spectroscopy (XPS) revealed that laser processing had minimal impact on surface chemistry, with aluminum oxide remaining the dominant component. Differences in physical properties, such as conductivity, reflectivity, and melting point, were identified as the key factors influencing ablation behaviour. These findings underscore the need for material-specific optimization when developing femtosecond laser-based processing techniques for aluminum alloys.
SN - 2666-5239
ER -