Amine Grafting on Silica Nanoparticles in Water: A Systematic Study
Abstract
The amine functionalization of silica nanoparticles (SiNPs) using aminotrialkoxysilanes is typically conducted in organic solvents and is widely applied across diverse fields. Recent studies have demonstrated that this modification can also be achieved in aqueous media at low temperatures; however, the impact of water as the primary solvent on the formation and morphology of alkoxysilane grafting remains unexplored. To address this gap, we systematically investigated the influence of key experimental parameters (including particle size and concentration, type and concentration of aminoalkoxysilanes, and pH) on grafting efficiency. Our results reveal that the highest amine grafting density in water is achieved using a large excess of (3-aminopropyl)trimethoxysilane (APTMS) in diluted SiNP solutions with relatively large particle diameters (Dh ~150 nm) under basic conditions. The so-modified SiNPs exhibit a smooth surface with a reproducible surface amine density of ~12 NH₂ nm-² (among the highest recorded in the literature). Such density is attributed to the grafting of short polymerized aminotrialkoxysilane chains on the silica surface. In addition, while this dense APTMS graft is sensitive to hydrolytic degradation, storage at low temperatures preserves a high grafting density (~10 NH₂ nm-²) over several weeks. This study provides a comprehensive understanding of the experimental conditions governing amine grafting on SiNPs in aqueous media and offers practical guidelines for the preparation of SiNPs with dense amine functionalization.
Related
- Biasing the dynamic Δ/Λ equilibrium of a helical and luminescent Tb(iii) complex on chiral amine-functionalized silica surfaces.
- SiO2-Amine Materials from Geothermal Silica Waste with Potential Application in Direct CO2 Air Capture
- Deoxygenation of amine N-oxides using gold nanoparticles supported on carbon nanotubes
- Impact of silica nanoparticles architectures on the photosensitization of O2 by immobilized Rose Bengal
- Design meets simplicity: employing anhydrous precursors in microwave synthesis of NaGdF₄:Yb³⁺,Tm³⁺ upconverting nanoparticles and their deposition inside mesoporous titania or silica thin films through spin-coating
BibTeX
@article{gibiino2026amine,
title = {{Amine Grafting on Silica Nanoparticles in Water: A Systematic Study}},
author = {Alice Gibiino and Roa Bouhamad and Laurent Orgéas and Rachel Auzély-Velty and Mehdi Bouzid and Raphaël Michel},
journal = {Langmuir},
year = {2026},
month = oct,
doi = {10.1021/acs.langmuir.6c03900},
url = {https://hal.science/hal-05820923v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Amine Grafting on Silica Nanoparticles in Water: A Systematic Study
AU - Alice Gibiino
AU - Roa Bouhamad
AU - Laurent Orgéas
AU - Rachel Auzély-Velty
AU - Mehdi Bouzid
AU - Raphaël Michel
PY - 2026
DA - 2026/10/19
JO - Langmuir
DO - 10.1021/acs.langmuir.6c03900
UR - https://hal.science/hal-05820923v1
AB - The amine functionalization of silica nanoparticles (SiNPs) using aminotrialkoxysilanes is typically conducted in organic solvents and is widely applied across diverse fields. Recent studies have demonstrated that this modification can also be achieved in aqueous media at low temperatures; however, the impact of water as the primary solvent on the formation and morphology of alkoxysilane grafting remains unexplored. To address this gap, we systematically investigated the influence of key experimental parameters (including particle size and concentration, type and concentration of aminoalkoxysilanes, and pH) on grafting efficiency. Our results reveal that the highest amine grafting density in water is achieved using a large excess of (3-aminopropyl)trimethoxysilane (APTMS) in diluted SiNP solutions with relatively large particle diameters (Dh ~150 nm) under basic conditions. The so-modified SiNPs exhibit a smooth surface with a reproducible surface amine density of ~12 NH₂ nm-² (among the highest recorded in the literature). Such density is attributed to the grafting of short polymerized aminotrialkoxysilane chains on the silica surface. In addition, while this dense APTMS graft is sensitive to hydrolytic degradation, storage at low temperatures preserves a high grafting density (~10 NH₂ nm-²) over several weeks. This study provides a comprehensive understanding of the experimental conditions governing amine grafting on SiNPs in aqueous media and offers practical guidelines for the preparation of SiNPs with dense amine functionalization.
SN - 0743-7463
SN - 1520-5827
ER -