Combined effects of wood flour and thermoplastic starch on the physical, thermal, and weight loss properties of polylactic acid biocomposites
Abstract
This study investigates the combined effects of wood flour (WF) and a starch-based compound on the physical, thermal, and soil-burial mass loss properties of polylactic acid (PLA) biocomposites, intentionally omitting compatibilizers to isolate inherent interfacial interactions. Composites were prepared via extrusion and compression molding with varying ratios of PLA (30–50 wt%), starch-based compound (20–60 wt%), and WF (10–30 wt%). Characterization included FTIR spectroscopy, density measurements, contact angle analysis, soil-burial tests, and TGA/DSC. FTIR analysis revealed carbonyl peak shifts from 1746 to 1735 cm ⁻¹ , suggesting polar interfacial interactions consistent with hydrogen bonding between PLA and the hydroxyl-containing fillers. Density measurements indicated high compaction (relative density > 0.95). Soil-burial tests demonstrated 4–7% mass loss over 6 weeks. Most notably, DSC revealed WF as a potent nucleating agent, increasing PLA crystallinity from 49.50 to 73.15%. This study provides crucial baseline data on intrinsic filler interactions and synergies for sustainable biocomposite design without mandatory compatibilization.
Related
- From torrefaction to pyrolysis: Influence of bamboo biochar production route on biochar characteristics and the thermal and mechanical performance of polylactic acid biocomposites
- Tailoring the viscoelastic properties of injectable biocomposites: A spectroscopic assessment of the interactions between organic carriers and bioactive glass particles
- Polylactic acid/quercetin composite films with enhanced UV-shielding and antioxidant properties for packaging applications
- "Effect of modified montmorillonite on properties of chlorinated butyl rubber/polypropylene thermoplastic vulcanizates"
- Effect of AKD Content on Wettability, Water Absorption Kinetics, and Interfacial Properties of Poplar Wood Flour/PLA Biocomposites
BibTeX
@article{rizi2026combined,
title = {{Combined effects of wood flour and thermoplastic starch on the physical, thermal, and weight loss properties of polylactic acid biocomposites}},
author = {Ali Salimian Rizi and Seyed Mojtaba Zebarjad and Zahra Sherafat},
journal = {Scientific Reports},
year = {2026},
month = sep,
doi = {10.1038/s41598-026-73732-z},
url = {https://www.nature.com/articles/s41598-026-73732-z},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Combined effects of wood flour and thermoplastic starch on the physical, thermal, and weight loss properties of polylactic acid biocomposites
AU - Ali Salimian Rizi
AU - Seyed Mojtaba Zebarjad
AU - Zahra Sherafat
PY - 2026
DA - 2026/09/30
JO - Scientific Reports
DO - 10.1038/s41598-026-73732-z
UR - https://www.nature.com/articles/s41598-026-73732-z
AB - This study investigates the combined effects of wood flour (WF) and a starch-based compound on the physical, thermal, and soil-burial mass loss properties of polylactic acid (PLA) biocomposites, intentionally omitting compatibilizers to isolate inherent interfacial interactions. Composites were prepared via extrusion and compression molding with varying ratios of PLA (30–50 wt%), starch-based compound (20–60 wt%), and WF (10–30 wt%). Characterization included FTIR spectroscopy, density measurements, contact angle analysis, soil-burial tests, and TGA/DSC. FTIR analysis revealed carbonyl peak shifts from 1746 to 1735 cm ⁻¹ , suggesting polar interfacial interactions consistent with hydrogen bonding between PLA and the hydroxyl-containing fillers. Density measurements indicated high compaction (relative density > 0.95). Soil-burial tests demonstrated 4–7% mass loss over 6 weeks. Most notably, DSC revealed WF as a potent nucleating agent, increasing PLA crystallinity from 49.50 to 73.15%. This study provides crucial baseline data on intrinsic filler interactions and synergies for sustainable biocomposite design without mandatory compatibilization.
SN - 2045-2322
ER -