Characterisation and 3D modelling of Cast Duplex Stainless Steel microstructure: Application to ultrasonic wave propagation simulations
Abstract
Due to their high strength and corrosion resistance , Cast Duplex Stainless Steels (CDSS) are employed in the primary coolant piping of nuclear power reactors . In-service Non-Destructive Evaluations (NDEs) based on Ultrasonic Testing (UT) must be conducted to ensure their safe operation. However, accurately detecting and sizing flaws within CDSS components poses a significant challenge. This is primarily due to their manufacturing process, which results in metallurgical structures featuring coarse grains and complex microstructural features , including a dual-phase composition with various morphological scales. Thus, in these structures, ultrasonic waves undergo scattering at grain boundaries, leading to high attenuation and structure noise echoes that alter the inspection. Modelling these phenomena using 3D numerical simulation tools with a detailed description of the microstructure allows for a better understanding of the multiple wave/microstructure interactions by quantifying the influence of microstructural characteristics on NDE performance. This paper aims to present the results of numerical simulations applied to representative CDSS microstructures . Thanks to the use and development of numerical tools, virtual microstructures of these duplex steels can be generated with different levels of complexity in Representative Elements Volumes (REVs). These REVs are validated to varying scales through comparison with experimental metallurgical characterisations. They are then used to define the propagation media using dedicated Finite Element (FE) software to observe the impact of this microstructure on ultrasonic waves . These FE simulations will then characterise the effective homogeneous media by determining attenuation and phase velocity variations as a function of the wave frequency. The attenuation results obtained from these simulations are compared with experimental attenuation measurements for different frequencies.
Related
- Ultrasound real-time imaging of crack propagation during ultrasonic fatigue tests
- Fascia anisotropic damage propagation with microstructure- level descriptors
- Microstructure-Based Phase-Field Modeling of Aortic Dissection Initiation and Propagation
- Experimentally validated process-microstructure-property relations of bainitic steels derived from phase-field simulations
- Pore-scale mechanisms of capillary imbibition in cement-based materials revealed by direct numerical simulations in a realistic FIB-SEM microstructure
BibTeX
@article{aghenzour2026characterisation,
title = {{Characterisation and 3D modelling of Cast Duplex Stainless Steel microstructure: Application to ultrasonic wave propagation simulations}},
author = {Zakaria Aghenzour and Pierre-Emile Lhuillier and Nicolas Leymarie and Vincent Dorval and Alexandre Imperiale},
journal = {International Journal of Pressure Vessels and Piping},
year = {2026},
month = sep,
doi = {10.1016/j.ijpvp.2024.105430},
url = {https://cea.hal.science/cea-05768328v1},
note = {CC BY},
}
RIS
TY - JOUR
TI - Characterisation and 3D modelling of Cast Duplex Stainless Steel microstructure: Application to ultrasonic wave propagation simulations
AU - Zakaria Aghenzour
AU - Pierre-Emile Lhuillier
AU - Nicolas Leymarie
AU - Vincent Dorval
AU - Alexandre Imperiale
PY - 2026
DA - 2026/09/28
JO - International Journal of Pressure Vessels and Piping
DO - 10.1016/j.ijpvp.2024.105430
UR - https://cea.hal.science/cea-05768328v1
AB - Due to their high strength and corrosion resistance , Cast Duplex Stainless Steels (CDSS) are employed in the primary coolant piping of nuclear power reactors . In-service Non-Destructive Evaluations (NDEs) based on Ultrasonic Testing (UT) must be conducted to ensure their safe operation. However, accurately detecting and sizing flaws within CDSS components poses a significant challenge. This is primarily due to their manufacturing process, which results in metallurgical structures featuring coarse grains and complex microstructural features , including a dual-phase composition with various morphological scales. Thus, in these structures, ultrasonic waves undergo scattering at grain boundaries, leading to high attenuation and structure noise echoes that alter the inspection. Modelling these phenomena using 3D numerical simulation tools with a detailed description of the microstructure allows for a better understanding of the multiple wave/microstructure interactions by quantifying the influence of microstructural characteristics on NDE performance. This paper aims to present the results of numerical simulations applied to representative CDSS microstructures . Thanks to the use and development of numerical tools, virtual microstructures of these duplex steels can be generated with different levels of complexity in Representative Elements Volumes (REVs). These REVs are validated to varying scales through comparison with experimental metallurgical characterisations. They are then used to define the propagation media using dedicated Finite Element (FE) software to observe the impact of this microstructure on ultrasonic waves . These FE simulations will then characterise the effective homogeneous media by determining attenuation and phase velocity variations as a function of the wave frequency. The attenuation results obtained from these simulations are compared with experimental attenuation measurements for different frequencies.
SN - 0308-0161
ER -