Vertical Attenuation of Thermoremanent Magnetic Anomalies: Implications for Drone-Borne Archaeological and Shallow Geophysical Surveys
Abstract
Magnetic surveys are widely used in archaeology to reveal buried features by detecting variations in the Earth's magnetic field caused by past human activities. However, as sensor height increases, magnetic anomalies produced by subsurface sources weaken and broaden, posing challenges for both ground-based and aerial (UAV) surveys. This study quantifies that altitude-dependent loss of signal and spatial definition using a fully synthetic model of a uniformly magnetized circular kiln together with upward continuation of measured fluxgate data from the Storbekken 1 iron-production site in central Norway. The synthetic experiment shows that a 2 m diameter, 1 m thick magnetized cylinder buried 0.3 m below ground retains only about 11% of its near-surface (0.2 m) peak amplitude at 2 m sensor height and about 3% at 4 m. In the hybrid experiment, composite furnace anomalies of several hundred nanoteslas collapse to tens of nanoteslas by 2 to 3 m, while distinct lobes merge into broad, low-contrast features. The results show that UAV-borne magnetometry can remain effective for site detection and delineation at elevations where detailed intra-site morphology is already strongly degraded. For small or subtle archaeological targets, sub-metre to low-metre sensor heights provide substantially greater interpretative detail. Recent field evidence on UAV-system noise further indicates that practical detectability will depend not only on source-distance attenuation but also on platform configuration and acquisition strategy. The resulting attenuation curves and morphological observations provide transferable guidance for planning archaeological and shallow-geophysical UAV magnetic surveys.
Related
- The tetragonal-cubic transition of davemaoite: Implications for lower mantle seismic anomalies
- Monitoring the evolution of coastal archaeological heritage at risk: the case of the Kerkenna archipelago, Tunisia
- Indirect estimation of soil shrink-swell susceptibility using the induced polarization geophysical method
- A Geophysical Crustal Model of Central Italy for Geoneutrino Predictions in Borexino
- Medieval landscapes of Corsica: Farming and cultural practices and environments as evidenced by an anthracological study of three archaeological castellated sites (Rostino, Contudine and L’Ortolo)
BibTeX
@misc{hegyi2026vertical,
title = {{Vertical Attenuation of Thermoremanent Magnetic Anomalies: Implications for Drone-Borne Archaeological and Shallow Geophysical Surveys}},
author = {Alexandru Hegyi and Kristoffer Aalstad and Arne Anderson Stamnes and Luc Girod and Sebastian Westermann and Diaa Sheishah and Enas Abdelsamei and Michał Pisz and Norbert Pirk},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.19349},
eprint = {2609.19349},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.19349},
note = {CC BY-NC-SA 4.0},
}
RIS
TY - UNPB
TI - Vertical Attenuation of Thermoremanent Magnetic Anomalies: Implications for Drone-Borne Archaeological and Shallow Geophysical Surveys
AU - Alexandru Hegyi
AU - Kristoffer Aalstad
AU - Arne Anderson Stamnes
AU - Luc Girod
AU - Sebastian Westermann
AU - Diaa Sheishah
AU - Enas Abdelsamei
AU - Michał Pisz
AU - Norbert Pirk
PY - 2026
DA - 2026/09/16
PB - arXiv
DO - 10.48550/arxiv.2609.19349
UR - https://arxiv.org/abs/2609.19349
AB - Magnetic surveys are widely used in archaeology to reveal buried features by detecting variations in the Earth's magnetic field caused by past human activities. However, as sensor height increases, magnetic anomalies produced by subsurface sources weaken and broaden, posing challenges for both ground-based and aerial (UAV) surveys. This study quantifies that altitude-dependent loss of signal and spatial definition using a fully synthetic model of a uniformly magnetized circular kiln together with upward continuation of measured fluxgate data from the Storbekken 1 iron-production site in central Norway. The synthetic experiment shows that a 2 m diameter, 1 m thick magnetized cylinder buried 0.3 m below ground retains only about 11% of its near-surface (0.2 m) peak amplitude at 2 m sensor height and about 3% at 4 m. In the hybrid experiment, composite furnace anomalies of several hundred nanoteslas collapse to tens of nanoteslas by 2 to 3 m, while distinct lobes merge into broad, low-contrast features. The results show that UAV-borne magnetometry can remain effective for site detection and delineation at elevations where detailed intra-site morphology is already strongly degraded. For small or subtle archaeological targets, sub-metre to low-metre sensor heights provide substantially greater interpretative detail. Recent field evidence on UAV-system noise further indicates that practical detectability will depend not only on source-distance attenuation but also on platform configuration and acquisition strategy. The resulting attenuation curves and morphological observations provide transferable guidance for planning archaeological and shallow-geophysical UAV magnetic surveys.
ER -