Toppling deformation mechanisms in layered rock slopes controlled by bedding dip angle
- 1School of Energy and Mining Engineering, China University of Mining and Technology (Beijing)
Abstract
Rock slope toppling is a widespread geological hazard, and a clear understanding of its deformation and failure characteristics is essential for slope engineering and hazard mitigation. Investigating the mechanisms governing toppling failure provides a scientific basis for optimizing slope design and reducing associated geological risks. In this study, the deformation evolution and failure mechanisms of layered rock slopes with different bedding dip angles were investigated through a combination of base-friction physical model tests and numerical simulations. The results show that bedding dip angle plays a critical role in controlling the deformation pattern and instability behavior of layered rock slopes, leading to distinct failure processes under different structural conditions. For slopes with bedding dip angles of 45° and 60°, cracking initiated near the slope toe and subsequently propagated upward. In contrast, when the bedding dip angle increased to 75°, cracks first developed at the slope crest and gradually extended downward toward the slope toe. With increasing bedding dip angle, the rear boundary of the toppling zone progressively migrated backward, accompanied by greater rock mass damage depth, expansion of the toppling zone, and more pronounced toppling deformation. Furthermore, image-based tracking and identification techniques were employed to monitor displacement variations during the toppling process. The monitoring results indicate that slope deformation exhibits clear stage-dependent characteristics, evolving progressively from localized deformation to global instability. The observed differences in toppling behavior among slopes with varying bedding dip angles are mainly attributed to bedding-orientation-induced variations in the underlying failure mechanisms. These findings provide valuable insights into the toppling deformation mechanisms of layered rock slopes and offer a scientific basis for stability assessment and hazard evaluation of slopes prone to toppling failure.
Related
- Experimental investigation of ground fissure reactivation and differential deformation under layered groundwater pumping–recharge conditions
- Semi-analytic reference solutions for 3D controlled-source electromagnetics: a conductive sphere beneath Gaussian topography in a layered earth
- Elucidating permselectivity mechanisms in polyamide membranes through controlled chlorination and hydrolysis
- Rheology-controlled hydraulic selection in fracture-matrix heat transport: Mechanisms and thermal signatures
- Rheology-controlled hydraulic selection in fracture-matrix heat transport: Mechanisms and thermal signatures
BibTeX
@article{li2026toppling,
title = {{Toppling deformation mechanisms in layered rock slopes controlled by bedding dip angle}},
author = {Yuan Li and Shu-wei Sun and Xin-yu Fu and Jun Li},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-63725-3},
url = {https://doi.org/10.1038/s41598-026-63725-3},
note = {CC BY},
}
RIS
TY - JOUR
TI - Toppling deformation mechanisms in layered rock slopes controlled by bedding dip angle
AU - Yuan Li
AU - Shu-wei Sun
AU - Xin-yu Fu
AU - Jun Li
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-63725-3
UR - https://doi.org/10.1038/s41598-026-63725-3
AB - Rock slope toppling is a widespread geological hazard, and a clear understanding of its deformation and failure characteristics is essential for slope engineering and hazard mitigation. Investigating the mechanisms governing toppling failure provides a scientific basis for optimizing slope design and reducing associated geological risks. In this study, the deformation evolution and failure mechanisms of layered rock slopes with different bedding dip angles were investigated through a combination of base-friction physical model tests and numerical simulations. The results show that bedding dip angle plays a critical role in controlling the deformation pattern and instability behavior of layered rock slopes, leading to distinct failure processes under different structural conditions. For slopes with bedding dip angles of 45° and 60°, cracking initiated near the slope toe and subsequently propagated upward. In contrast, when the bedding dip angle increased to 75°, cracks first developed at the slope crest and gradually extended downward toward the slope toe. With increasing bedding dip angle, the rear boundary of the toppling zone progressively migrated backward, accompanied by greater rock mass damage depth, expansion of the toppling zone, and more pronounced toppling deformation. Furthermore, image-based tracking and identification techniques were employed to monitor displacement variations during the toppling process. The monitoring results indicate that slope deformation exhibits clear stage-dependent characteristics, evolving progressively from localized deformation to global instability. The observed differences in toppling behavior among slopes with varying bedding dip angles are mainly attributed to bedding-orientation-induced variations in the underlying failure mechanisms. These findings provide valuable insights into the toppling deformation mechanisms of layered rock slopes and offer a scientific basis for stability assessment and hazard evaluation of slopes prone to toppling failure.
SN - 2045-2322
ER -