Sustainable water recovery from steel industry wastewater via direct contact membrane distillation
- 1Center for Membrane Technology, Department of Chemistry and Bioscience, Aalborg University
- 2AAU Energy, Aalborg University
Abstract
Direct Contact Membrane Distillation (DCMD) was investigated for water and heat reuse from steel industry wastewater, with a novel integrated framework combining experimental validation, thermodynamic simulations, and predictive modelling. Experimental tests with a hollow fiber polypropylene membrane demonstrated stable flux in the range of 1.4–4.8 kg/(m² h) over a feed temperature range of 40–60 °C, with salt rejection above 99.9% and no evidence of scaling or wetting, even up to 93% recovery. Then, solubility simulations with PHREEQC were performed, accurately reproducing solution properties and predicting undersaturation conditions even at high recoveries. The constant and high water activity calculated from these simulations explains the stable flux observed, while the predicted absence of solid phases matches the lack of scaling in experiments. The developed DCMD model was validated against experimental data and 14 independent datasets from the literature, achieving low errors (MAPE < 5%) and strong correlations (R² > 0.96) for flux and outlet temperatures. Parametric simulations revealed that higher feed temperatures and velocities enhance flux, productivity and specific thermal energy consumption (STEC), while reducing the membrane area required to produce 1 m³/day of water. These improvements result from increased driving force and reduced polarization effects but must be balanced against higher energy demands for heating and pumping. Overall, the study demonstrates that DCMD can achieve high recovery and excellent water quality for industrial wastewater treatment, and that the validated model provides a reliable tool for system design and scale-up in industrial contexts. Graphical Abstract
Related
- Integrated alkaline electrolyser-pressure retarded membrane distillation system for ammonia wastewater valorisation: technoeconomic and environmental assessment
- Integrated media filtration and membrane bioreactor technology for sustainable domestic wastewater treatment
- Genome-resolved metagenomics reveals potential biochemical capabilities of a microbial community in an industrial wastewater membrane bioreactor during performance deterioration and recovery
- Balancing economic growth and environmental protection: A sustainable approach to Malaysia's rare-earth industry
- Sustainable Chemical Approaches for Wastewater Treatment and Resource Utilization
BibTeX
@article{sulaiman2026sustainable,
title = {{Sustainable water recovery from steel industry wastewater via direct contact membrane distillation}},
author = {Hussein Fairousha Sulaiman and Imen Bousrih and Simón Díaz-Quezada and Aamer Ali and Cejna Anna Quist-Jensen},
journal = {Discover Water},
year = {2026},
month = jul,
doi = {10.1007/s43832-026-00418-y},
url = {https://doi.org/10.1007/s43832-026-00418-y},
note = {CC BY},
}
RIS
TY - JOUR
TI - Sustainable water recovery from steel industry wastewater via direct contact membrane distillation
AU - Hussein Fairousha Sulaiman
AU - Imen Bousrih
AU - Simón Díaz-Quezada
AU - Aamer Ali
AU - Cejna Anna Quist-Jensen
PY - 2026
DA - 2026/07/01
JO - Discover Water
DO - 10.1007/s43832-026-00418-y
UR - https://doi.org/10.1007/s43832-026-00418-y
AB - Direct Contact Membrane Distillation (DCMD) was investigated for water and heat reuse from steel industry wastewater, with a novel integrated framework combining experimental validation, thermodynamic simulations, and predictive modelling. Experimental tests with a hollow fiber polypropylene membrane demonstrated stable flux in the range of 1.4–4.8 kg/(m² h) over a feed temperature range of 40–60 °C, with salt rejection above 99.9% and no evidence of scaling or wetting, even up to 93% recovery. Then, solubility simulations with PHREEQC were performed, accurately reproducing solution properties and predicting undersaturation conditions even at high recoveries. The constant and high water activity calculated from these simulations explains the stable flux observed, while the predicted absence of solid phases matches the lack of scaling in experiments. The developed DCMD model was validated against experimental data and 14 independent datasets from the literature, achieving low errors (MAPE < 5%) and strong correlations (R² > 0.96) for flux and outlet temperatures. Parametric simulations revealed that higher feed temperatures and velocities enhance flux, productivity and specific thermal energy consumption (STEC), while reducing the membrane area required to produce 1 m³/day of water. These improvements result from increased driving force and reduced polarization effects but must be balanced against higher energy demands for heating and pumping. Overall, the study demonstrates that DCMD can achieve high recovery and excellent water quality for industrial wastewater treatment, and that the validated model provides a reliable tool for system design and scale-up in industrial contexts. Graphical Abstract
SN - 2730-647X
ER -