Ionic-Liquid-Catalyzed Depolymerization of PET: BHET Recovery and Re-Polymerization
4 affiliations
- 1Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
- 2Institute of Zhejiang University-Quzhou, Quzhou 324000, China
- 3State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
- 4Interdisciplinary Research Center for Refining and Advanced Chemicals, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
Abstract
The accumulation of polyethylene terephthalate (PET) waste presents significant environmental challenges due to its extensive usage and low global recycling rates. Among the available recycling routes, chemical depolymerization by glycolysis offers a promising way to recover high-value monomers. In this study, six ionic liquids (ILs) were tested as homogeneous catalysts for the glycolysis of post-consumer PET bottles in ethylene glycol (EG) at 200 °C for 3 h, alongside an uncatalyzed control. 1-Butyl-3-methylimidazolium acetate ([BMIM][OAc]) and trihexyltetradecylphosphonium decanoate ([P6,6,6,14][Dec]) gave complete PET conversion with isolated bis(2-hydroxyethyl) terephthalate (BHET) yields of 33.6% and 72.4%, respectively. Moreover, trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate ([P6,6,6,14][TMPP]) reached 56% conversion with no separable product; however, the other three chloride-based ILs and the control reaction demonstrated negligible conversion at the given process parameters. The recovered BHET was characterized by FT-IR, 1H and 13C NMR and GC-MS, and further, was re-polymerized by melt polycondensation at 270 °C. The FT-IR fingerprint, thermogravimetric decomposition profile and solid-state 13C NMR spectrum indicated that the properties of the recycled PET compete with those of the bottlegrade PET. Their melting peak lay 7.7 °C below the reference on first heating (240.6 vs. 248.3 °C) but rose to 248.5 °C on second heating, 3.3 °C above the reference, suggesting that the initial difference arises mainly from crystal perfection and thermal history rather than from an altered chain structure.
Related
- Batch and Continuous Flow Method of Separation and Recovery of Co(II) and Ni(II) Using an Analog of Glycine-Betaine Based Ionic Liquid
- From extraction to closed-loop recovery: recent advances in ionic-liquid-based recycling of platinum-group metals.
- Multifunctional LiClO4 for Polymerization Regulation, Ionic Conduction, and Interphase Formation in In Situ Poly(tetrahydrofuran) Gel Polymer Electrolytes
- Mechanistic Insights into Zinc Acetate Dihydrate–Catalyzed Depolymerization of Recycled PET for Polyol Production: A Combined Experimental and DFT Study
- Electrochemical Depolymerization of Propionaldehyde-Stabilized Lignin on Nickel-based Electrodes Enhancing Monomer Yield Recovery
BibTeX
@article{karayev2026ionicliquidcatalyzed,
title = {{Ionic-Liquid-Catalyzed Depolymerization of PET: BHET Recovery and Re-Polymerization}},
author = {Akmuhammet Karayev and Farrukh Shehzad and Hassam Mazhar and Mamdouh A. Al-Harthi},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18202486},
url = {https://www.mdpi.com/2073-4360/18/20/2486},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Ionic-Liquid-Catalyzed Depolymerization of PET: BHET Recovery and Re-Polymerization
AU - Akmuhammet Karayev
AU - Farrukh Shehzad
AU - Hassam Mazhar
AU - Mamdouh A. Al-Harthi
PY - 2026
DA - 2026/10/01
JO - Polymers
DO - 10.3390/polym18202486
UR - https://www.mdpi.com/2073-4360/18/20/2486
AB - The accumulation of polyethylene terephthalate (PET) waste presents significant environmental challenges due to its extensive usage and low global recycling rates. Among the available recycling routes, chemical depolymerization by glycolysis offers a promising way to recover high-value monomers. In this study, six ionic liquids (ILs) were tested as homogeneous catalysts for the glycolysis of post-consumer PET bottles in ethylene glycol (EG) at 200 °C for 3 h, alongside an uncatalyzed control. 1-Butyl-3-methylimidazolium acetate ([BMIM][OAc]) and trihexyltetradecylphosphonium decanoate ([P6,6,6,14][Dec]) gave complete PET conversion with isolated bis(2-hydroxyethyl) terephthalate (BHET) yields of 33.6% and 72.4%, respectively. Moreover, trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate ([P6,6,6,14][TMPP]) reached 56% conversion with no separable product; however, the other three chloride-based ILs and the control reaction demonstrated negligible conversion at the given process parameters. The recovered BHET was characterized by FT-IR, 1H and 13C NMR and GC-MS, and further, was re-polymerized by melt polycondensation at 270 °C. The FT-IR fingerprint, thermogravimetric decomposition profile and solid-state 13C NMR spectrum indicated that the properties of the recycled PET compete with those of the bottlegrade PET. Their melting peak lay 7.7 °C below the reference on first heating (240.6 vs. 248.3 °C) but rose to 248.5 °C on second heating, 3.3 °C above the reference, suggesting that the initial difference arises mainly from crystal perfection and thermal history rather than from an altered chain structure.
SN - 2073-4360
ER -