Transient Dynamics and Spatiotemporal Patterns of Gas Superposition in Multi-Shaft Asynchronous Reverse Ventilation
- 1Liaoning Technical University School of Safety Science and Engineering , ,
- 2Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education , ,
Abstract
Reverse ventilation in multishaft mines is a complex transient process, referred to as asynchronous reverse ventilation. To clarify the transient dynamics and mechanisms of gas migration and superposition, we developed a 3D high-fidelity dynamic simulation model of the ventilation network. Taking Shaqu No. 2 Mine’s two-wing ventilation system as a case study and using the TF1M3D platform, we simulated dynamic parameter variations and gas migration superposition during asynchronous reversal between the return-air inclined shaft and the Baijiapo return-air vertical shaft. The results show that two-wing asynchronous reversal adjustments induced air-volume variations of less than 9.2% in the return airways and less than 17.6% at the working face. Analysis of the impact of reverse ventilation on gas superposition and exceedance revealed distinct spatiotemporal patterns. At the 4903 working face, the gas concentration fluctuated, peaking at 1.69% at 510 s due to reversal superposition, and at 1.70% at 1550 s after ventilation restoration, exceeding the limit. At the 5303 working face, it peaked at 0.81% at 780 s and 0.95% at 1500 s postrestoration, approaching the thresholds. Fan adjustments during two-wing asynchronous reversals caused gas-concentration fluctuations at each working face, and mining haulage roadways also exhibited fluctuations and exceedance events.
Related
- High-speed in situ observation of transient bubble dynamics during molten salt electrolysis using laser Shadowgraphy
- Iridium Oxidation-State Dynamics during Transient Operation under PEM Water Electrolysis Single-Cell Conditions Revealed by Time-Resolved Operando XAS
- Repetitive superposition performance of stress waves in control module of projectile under dynamic impact
- Reply to Comment on "Efficient implementation of the superposition of atomic potentials initial guess for electronic structure calculations in Gaussian basis sets"
- ShapeAligner: Direct Molecular Superposition from Clique-Based Atom Correspondence
BibTeX
@article{li2026transient,
title = {{Transient Dynamics and Spatiotemporal Patterns of Gas Superposition in Multi-Shaft Asynchronous Reverse Ventilation}},
author = {Zongxiang Li and Zhongzhen You},
journal = {ACS Omega},
year = {2026},
month = nov,
doi = {10.1021/acsomega.6c08297},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08297/5466439/Transient-Dynamics-and-Spatiotemporal-Patterns-of},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Transient Dynamics and Spatiotemporal Patterns of Gas Superposition in Multi-Shaft Asynchronous Reverse Ventilation
AU - Zongxiang Li
AU - Zhongzhen You
PY - 2026
DA - 2026/11/09
JO - ACS Omega
DO - 10.1021/acsomega.6c08297
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08297/5466439/Transient-Dynamics-and-Spatiotemporal-Patterns-of
AB - Reverse ventilation in multishaft mines is a complex transient process, referred to as asynchronous reverse ventilation. To clarify the transient dynamics and mechanisms of gas migration and superposition, we developed a 3D high-fidelity dynamic simulation model of the ventilation network. Taking Shaqu No. 2 Mine’s two-wing ventilation system as a case study and using the TF1M3D platform, we simulated dynamic parameter variations and gas migration superposition during asynchronous reversal between the return-air inclined shaft and the Baijiapo return-air vertical shaft. The results show that two-wing asynchronous reversal adjustments induced air-volume variations of less than 9.2% in the return airways and less than 17.6% at the working face. Analysis of the impact of reverse ventilation on gas superposition and exceedance revealed distinct spatiotemporal patterns. At the 4903 working face, the gas concentration fluctuated, peaking at 1.69% at 510 s due to reversal superposition, and at 1.70% at 1550 s after ventilation restoration, exceeding the limit. At the 5303 working face, it peaked at 0.81% at 780 s and 0.95% at 1500 s postrestoration, approaching the thresholds. Fan adjustments during two-wing asynchronous reversals caused gas-concentration fluctuations at each working face, and mining haulage roadways also exhibited fluctuations and exceedance events.
SN - 2470-1343
ER -