Numerical modelling of ZnO-based solid-state dye-sensitized solar cells employing CdTe and kesterite Cu2XSnS4 (X = Fe, Ba and Mn) hole transport layers
- 1Department of Electrical and Electronic Engineering, International Islamic University Chittagong , Chattogram, 4318, Bangladesh
Abstract
This study investigates the performance of solid-state dye-sensitized solar cells (ssDSSCs) employing four hole transport layer (HTL) candidates: cadmium telluride (CdTe) and three kesterite materials—copper-barium-tin sulfide (CBTS), copper-iron-tin sulfide (CFTS) and copper-manganese-tin sulfide (CMTS). Electrical and optical parameters collected from the literature were incorporated into SCAPS-1D for device modelling. A comprehensive analysis examined the effects of HTL thickness, temperature, absorber and electron transport layer (ETL) thickness, capacitance, parasitic resistance and doping concentration on device performance. The results demonstrate that CdTe is a highly promising HTL, with the optimized fluorine-doped tin oxide (FTO)/ZnO/ruthenium complex dye (N719)/CdTe/Pt heterostructure achieving a power conversion efficiency (PCE) of 21.58%, a fill factor (FF) of 87.86%, an open-circuit voltage (VOC) of 1.106 V and a current density (JSC) of 22.21 mA cm−², exceeding previously reported values. Among kesterite-based HTLs, CBTS and CFTS exhibited notable PCEs of 16.42 and 14.80%, respectively, outperforming comparable studies. These findings indicate that CdTe, CBTS and CFTS are strong candidates for ssDSSC applications, offering enhanced efficiency and stability. Notably, CBTS emerges as a low-cost, Earth-abundant alternative with favourable band alignment and high thermal stability. This work provides valuable insights for advancing efficient and sustainable ssDSSC technologies.
Related
- Numerical Investigation of CsGeI3 Perovskite Solar Cells Employing PANI-Doped Graphene Oxide as a Hole Transport Layer
- Insights into Electrolyte Effects on Interfacial Kinetics and Transport in Porous Redox Flow Battery Electrodes: A Multiparadigm Modelling Study
- Numerical Simulation of the Effect of Mg-Doped TiO2 Electron Transport Layer on the Performance of Tetragonal MAPbI3 Perovskite Solar Cells
- Modelling and simulation of species transport in capillary-fed electrolysis cells
- Accounting for Thermal Effects in the Charge-Transfer Properties of Dipolar Organic Dyes for Dye-Sensitized Solar Cells
BibTeX
@article{abedin2026numerical,
title = {{Numerical modelling of ZnO-based solid-state dye-sensitized solar cells employing CdTe and kesterite Cu2XSnS4 (X = Fe, Ba and Mn) hole transport layers}},
author = {Minhajul Abedin and Imtiaz Ahamed and Md. Zahid Hasan and M. S. H. Choudhury},
journal = {Royal Society Open Science},
year = {2026},
month = nov,
doi = {10.1098/rsos.251606},
url = {https://royalsocietypublishing.org/rsos/article/13/11/251606/484146/Numerical-modelling-of-ZnO-based-solid-state-dye},
note = {CC BY},
}
RIS
TY - JOUR
TI - Numerical modelling of ZnO-based solid-state dye-sensitized solar cells employing CdTe and kesterite Cu2XSnS4 (X = Fe, Ba and Mn) hole transport layers
AU - Minhajul Abedin
AU - Imtiaz Ahamed
AU - Md. Zahid Hasan
AU - M. S. H. Choudhury
PY - 2026
DA - 2026/11/04
JO - Royal Society Open Science
DO - 10.1098/rsos.251606
UR - https://royalsocietypublishing.org/rsos/article/13/11/251606/484146/Numerical-modelling-of-ZnO-based-solid-state-dye
AB - This study investigates the performance of solid-state dye-sensitized solar cells (ssDSSCs) employing four hole transport layer (HTL) candidates: cadmium telluride (CdTe) and three kesterite materials—copper-barium-tin sulfide (CBTS), copper-iron-tin sulfide (CFTS) and copper-manganese-tin sulfide (CMTS). Electrical and optical parameters collected from the literature were incorporated into SCAPS-1D for device modelling. A comprehensive analysis examined the effects of HTL thickness, temperature, absorber and electron transport layer (ETL) thickness, capacitance, parasitic resistance and doping concentration on device performance. The results demonstrate that CdTe is a highly promising HTL, with the optimized fluorine-doped tin oxide (FTO)/ZnO/ruthenium complex dye (N719)/CdTe/Pt heterostructure achieving a power conversion efficiency (PCE) of 21.58%, a fill factor (FF) of 87.86%, an open-circuit voltage (VOC) of 1.106 V and a current density (JSC) of 22.21 mA cm−², exceeding previously reported values. Among kesterite-based HTLs, CBTS and CFTS exhibited notable PCEs of 16.42 and 14.80%, respectively, outperforming comparable studies. These findings indicate that CdTe, CBTS and CFTS are strong candidates for ssDSSC applications, offering enhanced efficiency and stability. Notably, CBTS emerges as a low-cost, Earth-abundant alternative with favourable band alignment and high thermal stability. This work provides valuable insights for advancing efficient and sustainable ssDSSC technologies.
SN - 2054-5703
ER -