Skip to content
DraconiticResearch
Search Sources API
203,234 studies31 sourcesUpdated 24 min ago
Peer-reviewedCC BYRSC advances

Chitosan-poly(ethylene glycol)-NaClO4 solid polymer electrolytes for activated carbon and flexible laser-induced graphene-based all-solid-state supercapacitors

  1. 1Manipal Institute of Technology, Manipal Academy of Higher Education Manipal India
  2. 2Symbiosis Institute of Technology (SIT), Pune Campus, Symbiosis International (Deemed University) (SIU) Pune-412115 India

Abstract

The growing demand for safe, flexible, and sustainable energy storage systems has increased research into all-solid-state supercapacitors. In this work, NaClO4-doped chitosan-poly(ethylene glycol) (PEG) solid polymer electrolytes (SPEs) were developed and systematically investigated for use in both rigid and flexible all-solid-state supercapacitors. A series of electrolyte compositions containing 0–50 wt% NaClO4 (designated CPN0–CPN50) was prepared to study how salt concentration affects the structural, thermal, and electrochemical properties of the electrolyte system. Spectroscopic and structural analyses confirmed strong interactions between the polymer matrix and salt, accompanied by an increase in the amorphous character, which is favorable for ion transport. Thermal studies further indicated composition-dependent thermal behavior and suitable stability over the investigated temperature range. Among the investigated compositions, the electrolyte containing 30 wt% NaClO4 (CPN30) showed the best performance, exhibiting bulk conductivity of 259.55 ± 19.88 µS cm−1, with an electrochemical stability window of 2.6 V, and an ionic transference number (0.9988), indicating dominant ionic conduction. The CPN30 electrolyte was integrated into symmetric activated carbon (AC) electrodes and laser-induced graphene (LIG) electrodes. The AC-based device showed a specific capacitance of 19.65 F g−1 at 1 mV s−1 from cyclic voltammetry (CV) and 19.01 F g−1 at the current density of 0.09 A g−1 from galvanostatic charge–discharge (GCD) analysis. The flexible LIG-based device achieved an areal capacitance of 22.31 mF cm−2 at 1 mV s−1 from CV and 19.94 mF cm−2 at the current density of 0.0225 mA cm−2 from GCD. Following this, mechanical flexibility tests demonstrated that the LIG-based device retained approximately 95.00% of its capacitance from the bending angle 180° to 90° and 92.56% after 500 bending cycles. In addition, after 3000 cycles, the device retained 87.52% of its initial capacitance, with a coulombic efficiency of 91.42%. These results suggest that NaClO4-doped chitosan-PEG electrolytes are promising candidates for sustainable, flexible solid-state energy storage applications.

Related

  1. Ion Transport Dynamics in Poly(ethylene oxide) and Poly(pentyl malonate) Electrolytes for Lithium Batteries
    Kyra M. K. Yap, Tianyang Li, Jaeyong Lee +3
    ChemRxivPreprintLicence not statedGeneral chemistryChemRxiv
  2. Electrolyte-pore interface architecture for high performance activated carbon supercapacitors
    Sushant Kumar, Pramod K. Singh, Salem. M. Aldosari +6
    Scientific ReportsPeer-reviewedCC BY-NC-ND 4.0Full textMaterials & polymersCrossref
  3. Iodide-Mediated Charge Storage in Deep Eutectic Solvent Electrolytes for Nontoxic Printed Supercapacitors.
    Chirag Mevada, Aapo Kattainen, Jari Keskinen +1
    ChemSusChemPeer-reviewedCC BYFull textMaterials & polymersEurope PMCPMC
  4. Reversible self-discharge behavior and its intrinsic mechanism in supercapacitors based on bilayer heterogeneous hydrogel electrolytes
    Zefeng Yan, Keyi Dong, Weiyang Tang +6
    Chemical SciencePeer-reviewedCC BY-NC 3.0Full textMaterials & polymersPMC
  5. Decoupling Nanofiller Dimensionality and Electronic Character in Gel Polymer Electrolytes for Supercapacitors
    Nishat Anzum Kanak, Hironmoy Chowdhury, Parisa Naji +2
    ChemRxivPreprintCC BY-NC-NDFull textMaterials & polymersChemRxiv
BibTeX
@article{jaleel2026chitosanpolyethylene,
  title = {{Chitosan-poly(ethylene glycol)-NaClO4 solid polymer electrolytes for activated carbon and flexible laser-induced graphene-based all-solid-state supercapacitors}},
  author = {Jadan Resnik Jaleel UC and Somashekara Bhat and Sudhakar YN and Vipin Cyriac},
  journal = {RSC advances},
  year = {2026},
  month = oct,
  doi = {10.1039/d6ra07397b},
  url = {https://europepmc.org/article/PMC/PMC13670042},
  note = {CC BY},
}
RIS
TY  - JOUR
TI  - Chitosan-poly(ethylene glycol)-NaClO4 solid polymer electrolytes for activated carbon and flexible laser-induced graphene-based all-solid-state supercapacitors
AU  - Jadan Resnik Jaleel UC
AU  - Somashekara Bhat
AU  - Sudhakar YN
AU  - Vipin Cyriac
PY  - 2026
DA  - 2026/10/15
JO  - RSC advances
DO  - 10.1039/d6ra07397b
UR  - https://europepmc.org/article/PMC/PMC13670042
AB  - The growing demand for safe, flexible, and sustainable energy storage systems has increased research into all-solid-state supercapacitors. In this work, NaClO4-doped chitosan-poly(ethylene glycol) (PEG) solid polymer electrolytes (SPEs) were developed and systematically investigated for use in both rigid and flexible all-solid-state supercapacitors. A series of electrolyte compositions containing 0–50 wt% NaClO4 (designated CPN0–CPN50) was prepared to study how salt concentration affects the structural, thermal, and electrochemical properties of the electrolyte system. Spectroscopic and structural analyses confirmed strong interactions between the polymer matrix and salt, accompanied by an increase in the amorphous character, which is favorable for ion transport. Thermal studies further indicated composition-dependent thermal behavior and suitable stability over the investigated temperature range. Among the investigated compositions, the electrolyte containing 30 wt% NaClO4 (CPN30) showed the best performance, exhibiting bulk conductivity of 259.55 ± 19.88 µS cm−1, with an electrochemical stability window of 2.6 V, and an ionic transference number (0.9988), indicating dominant ionic conduction. The CPN30 electrolyte was integrated into symmetric activated carbon (AC) electrodes and laser-induced graphene (LIG) electrodes. The AC-based device showed a specific capacitance of 19.65 F g−1 at 1 mV s−1 from cyclic voltammetry (CV) and 19.01 F g−1 at the current density of 0.09 A g−1 from galvanostatic charge–discharge (GCD) analysis. The flexible LIG-based device achieved an areal capacitance of 22.31 mF cm−2 at 1 mV s−1 from CV and 19.94 mF cm−2 at the current density of 0.0225 mA cm−2 from GCD. Following this, mechanical flexibility tests demonstrated that the LIG-based device retained approximately 95.00% of its capacitance from the bending angle 180° to 90° and 92.56% after 500 bending cycles. In addition, after 3000 cycles, the device retained 87.52% of its initial capacitance, with a coulombic efficiency of 91.42%. These results suggest that NaClO4-doped chitosan-PEG electrolytes are promising candidates for sustainable, flexible solid-state energy storage applications.
SN  - 2046-2069
ER  -