Analysis of Geometric Transformations in Automatic Door System Response with a Motion Sensor
- 1Universitas Islam Negeri Syekh Nurjati Cirebon
- 2Universitas Islam Negeri Siber Syekh Nurjati Cirebon
Abstract
Automatic sliding doors are usually studied as electronic systems, yet their motion offers a concrete context for geometric transformations. This study analyses how translation, reflection, and dilation describe the motion of a two-panel automatic sliding door at the main entrance of a shopping mall in Cirebon, Indonesia. The door was observed in 12 sessions over four days, with approximately 10–15 opening–closing cycles recorded per session, and the panel positions and opening widths were documented on video and mapped onto a Cartesian plane. Each panel moved by a pure horizontal translation along its rail, and the translations of the two panels were reflection-symmetric about the vertical centre line of the doorway. The representative opening width was 30 cm for a single user, 75 cm for two to three users, and 100 cm for a crowd. Taking the single-user opening as the reference aperture, the larger openings correspond to dilation factors k = 2.50 and k = 3.33 about the centre of the door, while the panels themselves remain rigid. Because detection distance and the number of users varied together and the door’s control logic was not accessible, these factors describe the observed openings rather than the controller’s rule. The door thus illustrates a composition of isometries combined with a change of scale of the aperture and can serve as a contextual resource for teaching geometric transformations.
Related
- Platform-Motion Response Evolution and Predicted TDB-Clearance Risk of a Ship-Mounted Flexible Rotor–Active Magnetic Bearing System
- Syzygy Transformations of Cluster Characters and Geometric Twists
- Graph Models of Cultural M-Grams: Polygonal Number Networks, Topological Index Partitions, and Geometric Transformations
- Geometric functionals of Brownian motion on Hermitian symmetric spaces of non-compact type
- AutoEnergyDesign: An LLM-Driven Agent for Automatic Energy System Design Optimization
BibTeX
@article{salsabila2026analysis,
title = {{Analysis of Geometric Transformations in Automatic Door System Response with a Motion Sensor}},
author = {Intan Salsabila and Risni Maulidia Maulidia and Zeldha Almaysa Kafka and Hanifa Afra Aini and Agni Rahima and Arif Muchyidin},
journal = {Journal of Mathematics Instruction, Social Research and Opinion},
year = {2026},
month = nov,
doi = {10.58421/misro.v5i3.888},
url = {https://doi.org/10.58421/misro.v5i3.888},
note = {CC BY-SA},
}
RIS
TY - JOUR
TI - Analysis of Geometric Transformations in Automatic Door System Response with a Motion Sensor
AU - Intan Salsabila
AU - Risni Maulidia Maulidia
AU - Zeldha Almaysa Kafka
AU - Hanifa Afra Aini
AU - Agni Rahima
AU - Arif Muchyidin
PY - 2026
DA - 2026/11/06
JO - Journal of Mathematics Instruction, Social Research and Opinion
DO - 10.58421/misro.v5i3.888
UR - https://doi.org/10.58421/misro.v5i3.888
AB - Automatic sliding doors are usually studied as electronic systems, yet their motion offers a concrete context for geometric transformations. This study analyses how translation, reflection, and dilation describe the motion of a two-panel automatic sliding door at the main entrance of a shopping mall in Cirebon, Indonesia. The door was observed in 12 sessions over four days, with approximately 10–15 opening–closing cycles recorded per session, and the panel positions and opening widths were documented on video and mapped onto a Cartesian plane. Each panel moved by a pure horizontal translation along its rail, and the translations of the two panels were reflection-symmetric about the vertical centre line of the doorway. The representative opening width was 30 cm for a single user, 75 cm for two to three users, and 100 cm for a crowd. Taking the single-user opening as the reference aperture, the larger openings correspond to dilation factors k = 2.50 and k = 3.33 about the centre of the door, while the panels themselves remain rigid. Because detection distance and the number of users varied together and the door’s control logic was not accessible, these factors describe the observed openings rather than the controller’s rule. The door thus illustrates a composition of isometries combined with a change of scale of the aperture and can serve as a contextual resource for teaching geometric transformations.
SN - 2962-7842
ER -