Enhanced Heat Transfer through Density- and Pressure-Driven Flow at Fracture Intersections With Dead-Ends
Abstract
Heat transport in fractured media is governed by coupled thermal-hydraulic (TH) processes. This study evaluates TH processes at fracture intersections, focusing on T-intersections where one horizontal fracture is subjected to a pressure gradient while the other forms a vertical dead-end fracture. Using numerical simulations, we investigate the influence of the inlet velocity, thermal Péclet, and Rayleigh numbers, and the impact of a pressure gradient along the T-intersection, on the resulting heat transport. The model domain consists of a fluid and a solid region. Fluid flow and heat transport in the fractures are described by the conservation equations for mass, momentum, and energy. The rock matrix is considered impermeable, therefore, it is governed by heat conduction. The simulations consistently show that heat transfer from the fluid to the matrix is enhanced when fluid flow occurs within the dead-end fracture, since such fluid flow maintains a higher temperature difference between the matrix and the fluid. This flow arises either from buoyancy-driven natural convection due to temperature-dependent fluid density or from a pressure gradient imposed by the orientation of the dead-end fracture with respect to the flow direction in the horizontal fracture. Natural convection dominates at high flow rate, Rayleigh, and Péclet numbers, whereas pressure-driven flow becomes the controlling mechanism for an increasing deviation from the orthogonal configuration of the two fracture planes and under higher flow rates. At low flow rates, Péclet, or Rayleigh numbers, no flow develops in the dead-end fracture, and heat transport in the dead-end fracture becomes conduction-dominated.
Related
- Coupling Between Fluid Pressure and Opening During Fluid Injection into a Pre-existing Fracture
- Thermo-viscous feedback in heat transport through fracture-matrix systems with finite thermal capacity
- Copper isotope evidence for Cu transfer during oceanic crust subduction: insights from the (ultra)high-pressure metamorphic belt of Southwestern Tianshan, China
- Near-inertial wave driven dissolved oxygen transfer through the thermocline of a large lake
- Assessing urban digital sustainability through composite indicators of digital use intensity and e-waste pressure in India
BibTeX
@misc{ringel2026enhanced,
title = {{Enhanced Heat Transfer through Density- and Pressure-Driven Flow at Fracture Intersections With Dead-Ends}},
author = {Lisa Maria Ringel and Yves Méheust and Caroline Darcel and Philippe Davy and Maria Klepikova},
howpublished = {HAL},
year = {2026},
month = aug,
eprint = {2606.21400},
archivePrefix = {arXiv},
url = {https://hal.science/hal-05769323v1},
note = {CC BY-NC-SA 4.0},
}
RIS
TY - UNPB
TI - Enhanced Heat Transfer through Density- and Pressure-Driven Flow at Fracture Intersections With Dead-Ends
AU - Lisa Maria Ringel
AU - Yves Méheust
AU - Caroline Darcel
AU - Philippe Davy
AU - Maria Klepikova
PY - 2026
DA - 2026/08/01
PB - HAL
UR - https://hal.science/hal-05769323v1
AB - Heat transport in fractured media is governed by coupled thermal-hydraulic (TH) processes. This study evaluates TH processes at fracture intersections, focusing on T-intersections where one horizontal fracture is subjected to a pressure gradient while the other forms a vertical dead-end fracture. Using numerical simulations, we investigate the influence of the inlet velocity, thermal Péclet, and Rayleigh numbers, and the impact of a pressure gradient along the T-intersection, on the resulting heat transport. The model domain consists of a fluid and a solid region. Fluid flow and heat transport in the fractures are described by the conservation equations for mass, momentum, and energy. The rock matrix is considered impermeable, therefore, it is governed by heat conduction. The simulations consistently show that heat transfer from the fluid to the matrix is enhanced when fluid flow occurs within the dead-end fracture, since such fluid flow maintains a higher temperature difference between the matrix and the fluid. This flow arises either from buoyancy-driven natural convection due to temperature-dependent fluid density or from a pressure gradient imposed by the orientation of the dead-end fracture with respect to the flow direction in the horizontal fracture. Natural convection dominates at high flow rate, Rayleigh, and Péclet numbers, whereas pressure-driven flow becomes the controlling mechanism for an increasing deviation from the orthogonal configuration of the two fracture planes and under higher flow rates. At low flow rates, Péclet, or Rayleigh numbers, no flow develops in the dead-end fracture, and heat transport in the dead-end fracture becomes conduction-dominated.
ER -