Skip to content
DraconiticResearch
Search Sources API
201,683 studies31 sourcesUpdated 48 min ago
Peer-reviewedCC BY 4.0ACS Omega

Production of NaOH-Modified Banana Pseudostem Biochars through Controlled Heating for Tetracycline Removal

  1. 1Federal University of Lavras , , Campus Universitário , , ,

Abstract

Proposing efficient adsorbents from agro-industrial waste for the removal of emerging contaminants, particularly tetracycline (TC), from aqueous systems remains a critical environmental challenge. In this study, we systematically investigate the influence of NaOH pretreatment combined with stepwise pyrolysis on the physicochemical properties and TC adsorption performance of biochars derived from banana pseudostem biomass. The biomass (with or without NaOH pretreatment) was subjected to pyrolysis at a heating rate of 15 °C min–1 under different thermal regimes, comprising either a single isothermal step at 400 °C or a stepwise heating pathway (215–400 °C), yielding unmodified and alkali-modified biochars for each condition. Physicochemical characterization (FTIR, XRD, BET, and pHPZC) revealed that alkaline treatment increased surface basicity, promoted the formation of oxygenated and carbonate phases, and improved pore development. The introduction of intermediate heating plateaus during pyrolysis also favored gradual devolatilization and structural rearrangement, contributing to the development of a more organized porous structure and greater accessibility of adsorption sites. Under unbuffered conditions at an initial pH of 6.0, the alkali-modified biochar produced through the 215–400 °C heating pathway exhibited an apparent adsorption capacity of 177.1 mg g–1. For the NaOH-modified biochars, kinetic data were better represented by the pseudo-second-order model, whereas equilibrium data were adequately described by Freundlich and Sips-type models, indicating heterogeneous adsorption behavior. The enhanced adsorption capacity was associated with the combined effects of surface chemistry, aromatic domains, and pore accessibility rather than with a single adsorption mechanism. These findings demonstrate that NaOH modification combined with controlled heating stages leads to the formation of biochars with enhanced TC adsorption capacity.

Related

  1. Adsorption and catalytic degradation of tetracycline by modified biochar in water : A review
    Lu Niu, Jia Sui, Yue Wang +1
    Results in EngineeringPeer-reviewedCC BY-NC6 citedHydrology & soilsOpenAlex
  2. Microwave-assisted β-cyclodextrin modified calcium-rich biochar for tetracycline removal from wastewater: mechanistic, machine learning, density functional theory calculations and life cycle assessment
    Chong Liu, Grégorio Crini, Ricardo Bello‐Mendoza +6
    BiocharPeer-reviewedCC BY12 citedHydrology & soilsOpenAlex
  3. Microstructural and physicochemical characterization, mechanical and durability performance with statistical evaluation of montmorillonite-impregnated burnt red soil bricks incorporating pyrolyzed coffee and tobacco biochars
    Amani Abdallah Hepautwa, Askwar Hilonga, Register Mrosso +2
    PLOS OnePeer-reviewedCC BY 4.0Full textMaterials & polymersGeology & geochemistryPLOS
  4. Ecofriendly adsorbent sugarcane bagasse biochar beads for tetracycline removal: From batch adsorption to packed-bed performance and sustainability index evaluation
    Meenu Mariam Jacob, Muthamilselvi Ponnuchamy, Gopika L. +2
    Next SustainabilityPeer-reviewedCC BYFull textHydrology & soilsDOAJ
  5. Adsorption and photocatalytic degradation of tetracycline using carbon quantum dot-CuBTC nanocomposites: isotherm, kinetics, and mechanistic studies.
    Sukhmanpreet Kaur, Shikha Bhogal, Soumen Basu
    RSC advancesPeer-reviewedCC BY-NCFull textHydrology & soilsEurope PMCPMC
BibTeX
@article{barboza2026production,
  title = {{Production of NaOH-Modified Banana Pseudostem Biochars through Controlled Heating for Tetracycline Removal}},
  author = {Maria Elisa Avila Barboza and João Antonio Tavares Barboza and Miriany Avelino Moreira Fernandez and Guilherme Max Dias Ferreira},
  journal = {ACS Omega},
  year = {2026},
  month = oct,
  doi = {10.1021/acsomega.6c05829},
  url = {https://pubs.acs.org/acsodf/article/11/41/63276/5446492/Production-of-NaOH-Modified-Banana-Pseudostem},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Production of NaOH-Modified Banana Pseudostem Biochars through Controlled Heating for Tetracycline Removal
AU  - Maria Elisa Avila Barboza
AU  - João Antonio Tavares Barboza
AU  - Miriany Avelino Moreira Fernandez
AU  - Guilherme Max Dias Ferreira
PY  - 2026
DA  - 2026/10/07
JO  - ACS Omega
DO  - 10.1021/acsomega.6c05829
UR  - https://pubs.acs.org/acsodf/article/11/41/63276/5446492/Production-of-NaOH-Modified-Banana-Pseudostem
AB  - Proposing efficient adsorbents from agro-industrial waste for the removal of emerging contaminants, particularly tetracycline (TC), from aqueous systems remains a critical environmental challenge. In this study, we systematically investigate the influence of NaOH pretreatment combined with stepwise pyrolysis on the physicochemical properties and TC adsorption performance of biochars derived from banana pseudostem biomass. The biomass (with or without NaOH pretreatment) was subjected to pyrolysis at a heating rate of 15 °C min–1 under different thermal regimes, comprising either a single isothermal step at 400 °C or a stepwise heating pathway (215–400 °C), yielding unmodified and alkali-modified biochars for each condition. Physicochemical characterization (FTIR, XRD, BET, and pHPZC) revealed that alkaline treatment increased surface basicity, promoted the formation of oxygenated and carbonate phases, and improved pore development. The introduction of intermediate heating plateaus during pyrolysis also favored gradual devolatilization and structural rearrangement, contributing to the development of a more organized porous structure and greater accessibility of adsorption sites. Under unbuffered conditions at an initial pH of 6.0, the alkali-modified biochar produced through the 215–400 °C heating pathway exhibited an apparent adsorption capacity of 177.1 mg g–1. For the NaOH-modified biochars, kinetic data were better represented by the pseudo-second-order model, whereas equilibrium data were adequately described by Freundlich and Sips-type models, indicating heterogeneous adsorption behavior. The enhanced adsorption capacity was associated with the combined effects of surface chemistry, aromatic domains, and pore accessibility rather than with a single adsorption mechanism. These findings demonstrate that NaOH modification combined with controlled heating stages leads to the formation of biochars with enhanced TC adsorption capacity.
SN  - 2470-1343
ER  -