Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 36 min ago
Peer-reviewedCC BY-NC-ND 4.0ACS Omega

Enhanced Stabilization of Steel Slag for Road Aggregate via Dual-Functional-Group Chelation of Poly(acrylic acid- co -vinylphosphonic acid)

  1. 1Wuhan University of Technology , , ,

Abstract

The volume expansion induced by residual free calcium oxide (f-CaO) in steel slag remains the primary limitation to its widespread application in pavement engineering. To address this issue, a novel polymer modifier (PAV) was synthesized via the aqueous radical polymerization of acrylic acid (AA) and vinylphosphonic acid (VPA). The effects of monomer ratios on the chemical structure, thermal stability, and Ca2+ chelation performance of PAV were systematically investigated using GPC, FTIR, SEM-EDS, and TGA. The modification mechanism of PAV on steel slag was revealed through systematic characterization and performance tests. Furthermore, the key process parameters for PAV-modified steel slag were optimized, and the volume stability and mechanical properties of the modified steel slag were comprehensively evaluated. The results indicated that the synthesized PAV exhibited a uniform molecular weight distribution and excellent thermal stability. Through the chelation effect of carboxyl and phosphonic acid groups, PAV can efficiently eliminate f-CaO in steel slag. When the mass ratio of AA to VPA is 8.5:1.5, PAV exhibits the optimal Ca2+ chelation performance, with a chelation capacity reaching 376 mg/g. The optimal modification concentration of PAV was determined to be 1.0 wt %. Under this condition, the f-CaO content of the modified steel slag was reduced to 0.54%, with a 10-day water immersion expansion rate of merely 0.46%, which was far below the standard limit. Meanwhile, the PAV modification did not damage the inorganic crystalline skeleton of the steel slag. Instead, it reduced its water absorption, aggregate crushing value, and Los Angeles abrasion value, thereby further optimizing its mechanical properties.

Related

  1. Improvement in Red Soil Aggregate Stabilization Using Biopolymers
    Hai Lin, Qihang Lai, Yu Xia +2
    PolymersPeer-reviewedCC BY 4.0Materials & polymersCrossref
  2. Accelerating the discovery of nanoporous gas separation materials via Coulomb-enhanced classical density functional theory
    Yong Qiu, Yu Liu, Weiqiang Tang +2
    Chemical sciencePeer-reviewedCC BY-NCFull textOrganic chemistryEurope PMC
  3. Pd-catalyzed, oxidant-promoted, chelation-assisted, regioselective direct ortho-nitration of 1-aryl-1H-indazoles via C–H bond activation: direct access to novel indazole-based antiproliferative agents
    Janmejaya Sen, Shivani, Pushpendra Kumar +2
    RSC advancesPeer-reviewedCC BY-NCFull textOrganic chemistryEurope PMCEurope PMCPMC
  4. From Hydration Shell to Chelate Cavity: Funnel-Metadynamics Reveals the Sr2+ Chelation Pathway of Decorporol
    Tamás Horváth, Milán Szőri, Béla Viskolcz +1
    The Journal of Physical Chemistry. BPeer-reviewedCC BY-NC-ND 4.0Full textOrganic chemistryPMC
  5. Green Micelle-Enhanced Spectrofluorimetric Determination of Gefitinib in Pharmaceutical Tablets Using Cremophor RH 40: Response-Surface Optimization and Time-Dependent Density Functional Theory (TD-DFT) Interpretation
    Ahmed H. Bakheit, Abdullah M. A. Alzaid, Abdulrahman A. Almajed
    International Journal of Molecular SciencesPeer-reviewedCC BY 4.0Analytical chemistryCrossref
BibTeX
@article{zhang2026enhanced,
  title = {{Enhanced Stabilization of Steel Slag for Road Aggregate via Dual-Functional-Group Chelation of Poly(acrylic acid- co -vinylphosphonic acid)}},
  author = {Shibo Zhang and Qinhao Deng and Sihui Peng and Jun Xie},
  journal = {ACS Omega},
  year = {2026},
  month = nov,
  doi = {10.1021/acsomega.6c08175},
  url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08175/5471049/Enhanced-Stabilization-of-Steel-Slag-for-Road},
  note = {CC BY-NC-ND 4.0},
}
RIS
TY  - JOUR
TI  - Enhanced Stabilization of Steel Slag for Road Aggregate via Dual-Functional-Group Chelation of Poly(acrylic acid- co -vinylphosphonic acid)
AU  - Shibo Zhang
AU  - Qinhao Deng
AU  - Sihui Peng
AU  - Jun Xie
PY  - 2026
DA  - 2026/11/16
JO  - ACS Omega
DO  - 10.1021/acsomega.6c08175
UR  - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08175/5471049/Enhanced-Stabilization-of-Steel-Slag-for-Road
AB  - The volume expansion induced by residual free calcium oxide (f-CaO) in steel slag remains the primary limitation to its widespread application in pavement engineering. To address this issue, a novel polymer modifier (PAV) was synthesized via the aqueous radical polymerization of acrylic acid (AA) and vinylphosphonic acid (VPA). The effects of monomer ratios on the chemical structure, thermal stability, and Ca2+ chelation performance of PAV were systematically investigated using GPC, FTIR, SEM-EDS, and TGA. The modification mechanism of PAV on steel slag was revealed through systematic characterization and performance tests. Furthermore, the key process parameters for PAV-modified steel slag were optimized, and the volume stability and mechanical properties of the modified steel slag were comprehensively evaluated. The results indicated that the synthesized PAV exhibited a uniform molecular weight distribution and excellent thermal stability. Through the chelation effect of carboxyl and phosphonic acid groups, PAV can efficiently eliminate f-CaO in steel slag. When the mass ratio of AA to VPA is 8.5:1.5, PAV exhibits the optimal Ca2+ chelation performance, with a chelation capacity reaching 376 mg/g. The optimal modification concentration of PAV was determined to be 1.0 wt %. Under this condition, the f-CaO content of the modified steel slag was reduced to 0.54%, with a 10-day water immersion expansion rate of merely 0.46%, which was far below the standard limit. Meanwhile, the PAV modification did not damage the inorganic crystalline skeleton of the steel slag. Instead, it reduced its water absorption, aggregate crushing value, and Los Angeles abrasion value, thereby further optimizing its mechanical properties.
SN  - 2470-1343
ER  -