Skip to content
DraconiticResearch
Search Sources API
203,203 studies31 sourcesUpdated 29 min ago
Peer-reviewedCC BYPolymers

Tribological Performance of FFF-Printed PLA and PLA-Wood Parts: The Effects of Infill Architecture, Heat Treatment, and Water Absorption

  • Berkay Ergene1
  • Bayram Yıldız2
  1. 1Department of Mechanical Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Türkiye
  2. 2Department of Metallurgical and Materials Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Türkiye;
Read full textPDFCite

Related

  1. The Role of Carbon Fibers in FFF 3D Printed Composites: A Comprehensive Review on the Effect on Mechanical Properties, Fracture Toughness, and Tribological Performance
    Lorenzo De Noni, Hengxi Chen
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  2. Effect of Hexagonal Boron Nitride (h-BN) Content on the Mechanical and Tribological Properties of Fused Deposition Modeling (FDM)-Printed PETG Composites
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  3. Effect of Heat treatment parameters on the tribological performance of LM26/graphite/fly ash hybrid aluminium matrix composites using Taguchi-TOPSIS optimization
    Prakash Chellamuthu, Palanisamy Angappan, Palanisamy Duraisamy +2
    PLOS OnePeer-reviewedCC BY 4.0Full textMaterials & polymersStatisticsPLOS
  4. Wear-Resistant Carbon Nanotube-Reinforced Copper Nanocomposites: Microstructural Evolution and Tribological Performance
    Sónia Simões, Beatriz S. Monteiro, Alexandra C. Alves
    NanomaterialsPeer-reviewedCC BY 4.0Materials & polymersCrossref
  5. Analyzing the tribological and thermal performance of polytetrafluoroethylene/recycled tire rubber composites fabricated by spark plasma sintering
    H. Boulman, F. Giovannelli, I.El Aboudi +6
    Composites Part C: Open AccessPeer-reviewedCC BYFull textGeneral chemistryHAL

Cite

BibTeXRIS
BibTeX
@article{ergene2026tribological,
  title = {{Tribological Performance of FFF-Printed PLA and PLA-Wood Parts: The Effects of Infill Architecture, Heat Treatment, and Water Absorption}},
  author = {Berkay Ergene and Bayram Yıldız},
  journal = {Polymers},
  year = {2026},
  month = sep,
  url = {https://europepmc.org/article/PMC/PMC13666842},
  note = {CC BY},
}
RIS
TY  - JOUR
TI  - Tribological Performance of FFF-Printed PLA and PLA-Wood Parts: The Effects of Infill Architecture, Heat Treatment, and Water Absorption
AU  - Berkay Ergene
AU  - Bayram Yıldız
PY  - 2026
DA  - 2026/09/23
JO  - Polymers
UR  - https://europepmc.org/article/PMC/PMC13666842
SN  - 2073-4360
ER  -