Effect of composition ratio on chitosan-gum Arabic copolymers for methylene blue dye adsorption: comparative evaluation using a Box–Behnken model
4 affiliations
- 1Mountain Top University
- 2Center for Scientific Research and Entrepreneurship, Northern Border University
- 3Department of Sports Health, College of Sport Sciences and Physical Activity, Princess Nourah bint Abdulrahman University
- 4Research Center of Basic Sciences, Engineering and High Altitude, Taif University
Abstract
The discharge of synthetic dyes into aquatic environments remains a significant environmental concern because of their colour persistence, potential toxicity, and negative effects on water quality. In this study, three chitosan-gum Arabic materials with different composition ratios (Copolymer A, B, and C) were prepared under mild conditions and comparatively evaluated for methylene blue adsorption. The materials were characterised using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). FTIR spectra showed shifts and intensity changes in hydroxyl, amide, and carboxylate-related bands, suggesting intermolecular interactions between chitosan and gum Arabic. SEM images indicated composition-dependent surface texture, while XRD patterns showed changes in structural ordering among the prepared materials. Adsorption of methylene blue was investigated using a Box-Behnken response surface design with four variables: adsorbent dosage (0.2–1.0 g), pH (3–13), contact time (30–240 min), and temperature (25–60 °C). The statistical models showed different levels of adequacy. For Copolymer A, the significant lack-of-fit and negative predicted R² indicated limited predictive reliability, and the model was therefore interpreted cautiously. Copolymer B followed a linear trend in which contact time was the most influential factor, while Copolymer C gave the most acceptable model response, with a significant pH-dosage interaction and non-significant lack-of-fit. Experimental validation gave removal efficiencies of 44.3%, 38.8%, and 59.8% for Copolymers A, B, and C, respectively. Although the removal efficiencies were moderate compared with highly modified adsorbents reported in the literature, the results demonstrate that composition ratio influences the structural features and adsorption response of chitosan-gum Arabic systems. The prepared biopolymer materials therefore provide a low-cost and environmentally benign platform for further development in dye-removal applications.
Related
- Comparative Evaluation of Regeneration Strategies for Rhodamine B Removal Using Raw Date Seeds: Insights into Adsorption Mechanisms
- Artificial neural network-assisted modelling of methylene blue dye adsorption onto ZIF-8 functionalized fishtail palm seed biomass: Isotherm and performance analysis
- Preparation and characterization of a clam shell powder/carrageenan composite for methylene blue adsorption
- Influence of Hydrothermal Carbonization Parameters on Surface Properties and Methylene Blue Adsorption Performance of Rose Stem-Derived Hydrochar
- Experimental and theoretical investigation of methylene blue adsorption onto cupules of scales: entropy, free enthalpy, and internal energy insights from statistical physics modeling and full factorial design
BibTeX
@article{ilesanmi2026effect,
title = {{Effect of composition ratio on chitosan-gum Arabic copolymers for methylene blue dye adsorption: comparative evaluation using a Box–Behnken model}},
author = {N. Y. Ilesanmi and B. Fabiyi and E. A. Ilesanmi and Ali El-Rayyes and Amnah Mohammed Alsuhaibani and Moamen S. Refat and E. A. Ofudje},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-63085-y},
url = {https://doi.org/10.1038/s41598-026-63085-y},
note = {CC BY},
}
RIS
TY - JOUR
TI - Effect of composition ratio on chitosan-gum Arabic copolymers for methylene blue dye adsorption: comparative evaluation using a Box–Behnken model
AU - N. Y. Ilesanmi
AU - B. Fabiyi
AU - E. A. Ilesanmi
AU - Ali El-Rayyes
AU - Amnah Mohammed Alsuhaibani
AU - Moamen S. Refat
AU - E. A. Ofudje
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-63085-y
UR - https://doi.org/10.1038/s41598-026-63085-y
AB - The discharge of synthetic dyes into aquatic environments remains a significant environmental concern because of their colour persistence, potential toxicity, and negative effects on water quality. In this study, three chitosan-gum Arabic materials with different composition ratios (Copolymer A, B, and C) were prepared under mild conditions and comparatively evaluated for methylene blue adsorption. The materials were characterised using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). FTIR spectra showed shifts and intensity changes in hydroxyl, amide, and carboxylate-related bands, suggesting intermolecular interactions between chitosan and gum Arabic. SEM images indicated composition-dependent surface texture, while XRD patterns showed changes in structural ordering among the prepared materials. Adsorption of methylene blue was investigated using a Box-Behnken response surface design with four variables: adsorbent dosage (0.2–1.0 g), pH (3–13), contact time (30–240 min), and temperature (25–60 °C). The statistical models showed different levels of adequacy. For Copolymer A, the significant lack-of-fit and negative predicted R² indicated limited predictive reliability, and the model was therefore interpreted cautiously. Copolymer B followed a linear trend in which contact time was the most influential factor, while Copolymer C gave the most acceptable model response, with a significant pH-dosage interaction and non-significant lack-of-fit. Experimental validation gave removal efficiencies of 44.3%, 38.8%, and 59.8% for Copolymers A, B, and C, respectively. Although the removal efficiencies were moderate compared with highly modified adsorbents reported in the literature, the results demonstrate that composition ratio influences the structural features and adsorption response of chitosan-gum Arabic systems. The prepared biopolymer materials therefore provide a low-cost and environmentally benign platform for further development in dye-removal applications.
SN - 2045-2322
ER -