Use of Deep Eutectic Solvents for the Extractive Desulfurization of a Straight Run Gas Oil and a Marine Fuel Oil: Fourier Transform Mass Spectrometry Characterization of Refractory Sulfur Species
Abstract
This study explores deep eutectic solvents (DESs) as potential alternatives to dimethylformamide (DMF) for extractive desulfurization of gas oil and marine fuel oil. A series of DESs, based on choline chloride (ChCl) and tetrabutylammonium bromide (TBAB), were evaluated using straight-run gas oil (SRGO) and compared to DMF. The influence of an oxidation pre-treatment and water content was also investigated, and the most efficient systems were further applied to marine fuel oil. Firstly, oxidation was found to be essential to enhance sulfur removal by improving the extractability of sulfone compounds. The results show that DES formulation strongly affects desulfurization performance, with TBAB-based DESs achieving efficiencies comparable to DMF (~80% desulfurization rate) and outperforming ChCl-based systems. In ChCl-based DESs, a moderate water content (~10 wt%) improved performance, whereas higher amounts disrupted the hydrogen-bond network, as evidenced by Fourier-transform infrared spectroscopy, leading to a decreased efficiency. When applied to marine fuel oil, similar trends were observed, although lower desulfurization levels were obtained due to the complexity of the feed, and a solvent-to-fuel ratio of 5:1 was required for proper phase separation. Fourier transform mass spectrometry analyses highlighted the persistence of refractory sulfur species, emphasizing the need for tailored solvent design. Overall, DESs represent promising and adaptable alternatives for desulfurization processes.
Related
- Quantitative Cryogenic Orbitrap Secondary Ion Mass Spectrometry for structural characterization of lipid nanoparticles
- Accelerated characterization of active natural extracts with single-step microfractionation coupled to mass spectrometry and bioassays
- Hydrophilic interaction chromatography and tandem mass spectrometry for the characterization of methylated oligoribonucleotides
- Wind Furnaces of the Atacama Salt Flat, Northern Chile: Copper Extractive Metallurgy at the Edge of Qhapaq Ñan
- Microstructure characterization of self-healing vitrimers via matrix assisted laser desorption/ionization (MALDI) and thermal desorption/pyrolysis direct analysis in real time (TDPy-DART) mass spectrometry (MS) techniques
BibTeX
@article{roy2026deep,
title = {{Use of Deep Eutectic Solvents for the Extractive Desulfurization of a Straight Run Gas Oil and a Marine Fuel Oil: Fourier Transform Mass Spectrometry Characterization of Refractory Sulfur Species}},
author = {Teddy Roy and Binetou Diawara and Georgette Estephane and Joy Alakari and Pascal Blanchard and Line Poinel and Mathilde Lauzent and Marie Hubert-Roux and Hélène Lavanant and Carlos Afonso and Carole Lamonier},
journal = {Purification},
year = {2026},
month = jun,
doi = {10.3390/purification2030009},
url = {https://hal.science/hal-05685879v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Use of Deep Eutectic Solvents for the Extractive Desulfurization of a Straight Run Gas Oil and a Marine Fuel Oil: Fourier Transform Mass Spectrometry Characterization of Refractory Sulfur Species
AU - Teddy Roy
AU - Binetou Diawara
AU - Georgette Estephane
AU - Joy Alakari
AU - Pascal Blanchard
AU - Line Poinel
AU - Mathilde Lauzent
AU - Marie Hubert-Roux
AU - Hélène Lavanant
AU - Carlos Afonso
AU - Carole Lamonier
PY - 2026
DA - 2026/06/29
JO - Purification
DO - 10.3390/purification2030009
UR - https://hal.science/hal-05685879v1
AB - This study explores deep eutectic solvents (DESs) as potential alternatives to dimethylformamide (DMF) for extractive desulfurization of gas oil and marine fuel oil. A series of DESs, based on choline chloride (ChCl) and tetrabutylammonium bromide (TBAB), were evaluated using straight-run gas oil (SRGO) and compared to DMF. The influence of an oxidation pre-treatment and water content was also investigated, and the most efficient systems were further applied to marine fuel oil. Firstly, oxidation was found to be essential to enhance sulfur removal by improving the extractability of sulfone compounds. The results show that DES formulation strongly affects desulfurization performance, with TBAB-based DESs achieving efficiencies comparable to DMF (~80% desulfurization rate) and outperforming ChCl-based systems. In ChCl-based DESs, a moderate water content (~10 wt%) improved performance, whereas higher amounts disrupted the hydrogen-bond network, as evidenced by Fourier-transform infrared spectroscopy, leading to a decreased efficiency. When applied to marine fuel oil, similar trends were observed, although lower desulfurization levels were obtained due to the complexity of the feed, and a solvent-to-fuel ratio of 5:1 was required for proper phase separation. Fourier transform mass spectrometry analyses highlighted the persistence of refractory sulfur species, emphasizing the need for tailored solvent design. Overall, DESs represent promising and adaptable alternatives for desulfurization processes.
SN - 3042-6197
SN - 3042-6197
ER -