Al3+-Modified Melamine Sponge for Downhole Oil–Water Separation

Abstract

Increasing water production during the later stages of oilfield development generates large volumes of produced water with low oil content, creating challenges for efficient treatment. Downhole oil–water separation can reduce the treatment load of surface facilities but requires materials with high oil selectivity and stable performance. Herein, a hydrophobically modified melamine sponge was prepared through a simple AlCl3 immersion method. SEM-EDS, FTIR, and XPS confirmed the introduction of Al3+ onto the sponge surface and supported its interaction with electron-donating sites in the melamine framework, while the original porous structure was preserved. The modified sponge exhibited water contact angles above 130° and adsorption capacities of approximately 100 g/g for crude oil and 89 g/g for paraffin oil. TGA indicated a modest improvement in thermal stability. Oil–water separation was further evaluated through adsorption, in situ extraction, and filtration. The adsorption mode achieved nearly 100% separation efficiency, while in situ extraction reached 97.5% efficiency at a rate of 6.25 mL/s. Filtration further demonstrated the potential for polishing low-oil-content wastewater. These results highlight Al3+-modified melamine sponge as a simple and versatile material for staged oil–water separation in oilfield applications.

Comparative Performance of Stearoyl Chloride-Modified Cellulose Sponges from Five Lignocellulosic Wastes for Oil/Water Separation
Emrecan Arpaci, Sami Imamoglu
Polymers13 Oct 2026Peer-reviewedCC BY 4.0Materials & polymersCrossref
Microwave-Assisted Degradation of Unsaturated Polyester Resin into HDPE-Modified Aerogels for Oil Adsorption and Oil/Water Separation.
Shixue He, Qianqian Qian, Daning Lang +1
Gels (Basel, Switzerland)14 Oct 2026Peer-reviewedCC BYFull textMaterials & polymersEurope PMC
Adsorption and enrichment of platinum(iv), palladium(ii), and rhodium(iii) from aqueous solutions using a modified jute powder followed by the separation and purification of the metals
Wang Guozhen, Zhang Jingfan, Liu Kuo +7
RSC advances2 Nov 2026Peer-reviewedCC BY-NCFull textGeneral chemistryEurope PMCEurope PMCPMC
Comparative Magnetic Heating of Surface-Modified Ferrite Nanoparticles in Water and Agar Phantoms
Aydın Evrim, Ayşesimay Çetin, Celaletdin Ergun +1
ChemRxiv2 Nov 2026PreprintLicence not statedGeneral chemistryChemRxiv
Removal of Pb(II) from Water by Potassium Permanganate-Modified Areca Fiber Biochar: Performance and Mechanism
Pingping Yang, Yunquan Liu, Wanxin Cheng +2
Molecules (Basel, Switzerland)27 Sep 2026Peer-reviewedCC BYFull textGeneral chemistryEurope PMC

Cite

BibTeX RIS

BibTeX

@article{li2026al3modified,
  title = {{Al3+-Modified Melamine Sponge for Downhole Oil–Water Separation}},
  author = {Mantian Li and Yiwei Fang and Song Zhang and Bin Ding and Yujun Feng},
  journal = {ACS Omega},
  year = {2026},
  month = nov,
  doi = {10.1021/acsomega.6c09142},
  url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c09142/5462604/Al3-Modified-Melamine-Sponge-for-Downhole-Oil},
  note = {CC BY-NC-ND 4.0},
}

RIS

TY  - JOUR
TI  - Al3+-Modified Melamine Sponge for Downhole Oil–Water Separation
AU  - Mantian Li
AU  - Yiwei Fang
AU  - Song Zhang
AU  - Bin Ding
AU  - Yujun Feng
PY  - 2026
DA  - 2026/11/03
JO  - ACS Omega
DO  - 10.1021/acsomega.6c09142
UR  - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c09142/5462604/Al3-Modified-Melamine-Sponge-for-Downhole-Oil
AB  - Increasing water production during the later stages of oilfield development generates large volumes of produced water with low oil content, creating challenges for efficient treatment. Downhole oil–water separation can reduce the treatment load of surface facilities but requires materials with high oil selectivity and stable performance. Herein, a hydrophobically modified melamine sponge was prepared through a simple AlCl3 immersion method. SEM-EDS, FTIR, and XPS confirmed the introduction of Al3+ onto the sponge surface and supported its interaction with electron-donating sites in the melamine framework, while the original porous structure was preserved. The modified sponge exhibited water contact angles above 130° and adsorption capacities of approximately 100 g/g for crude oil and 89 g/g for paraffin oil. TGA indicated a modest improvement in thermal stability. Oil–water separation was further evaluated through adsorption, in situ extraction, and filtration. The adsorption mode achieved nearly 100% separation efficiency, while in situ extraction reached 97.5% efficiency at a rate of 6.25 mL/s. Filtration further demonstrated the potential for polishing low-oil-content wastewater. These results highlight Al3+-modified melamine sponge as a simple and versatile material for staged oil–water separation in oilfield applications.
SN  - 2470-1343
ER  -

Abstract

Related

Cite