Direct Laser-Heated Pedestal (Czochralski) Growth of Rare-Earth Zirconate A 2Zr2O7 Single Crystals from Mixed-Oxide Precursors
- 1Charles University , , Ke Karlovu 5 , ,
Abstract
High-quality single crystals of refractory oxides are essential for fundamental investigations and advanced functional characterization, yet their preparation is frequently limited by demanding precursor processing and the extremely high temperatures required for crystal growth. Here, we present a practical, reproducible, and experimentally accessible protocol for the preparation of rare-earth zirconate A2Zr2O7 single crystals based on direct processing of mixed-oxide precursors using a laser-heated pedestal (modified Czochralski) technique. In contrast to conventional approaches employing fully reacted polycrystalline feed rods, the proposed route starts directly from homogenized stoichiometric oxide mixtures, substantially simplifying precursor preparation, therefore reducing processing time, energy consumption, handling steps, and opportunities for contamination. The manuscript focuses on the technological aspects of the preparation procedure, including precursor fabrication, optimization of crystal-growth parameters, processing considerations, as well as practical limitations, scope, and applicability of the method. The protocol was successfully applied to 11 selected A2Zr2O7 compositions (A = Y, La, Nd, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Lu), producing centimeter-scale single-crystalline ingots suitable for subsequent materials research. Representative structural and microstructural characterization confirms phase purity, crystallinity, and near-nominal cation stoichiometry, while detailed structural properties of the individual compounds are reported elsewhere. The presented methodology provides a robust and experimentally accessible route for the preparation of high-melting oxide single crystals and may be readily transferable to other refractory oxide systems requiring localized high-temperature melt growth.
Related
- Czochralski Growth of YSGAG Crystals: Experimental, Numerical, and Data-Assisted Analysis of Solid–Liquid Interface Shape
- Direct Determination of Pyroelectric Coefficients in Molecular Crystals by X-ray Quantum Crystallography
- A General Approach for the Generation of alpha-Thioalkyl Radicals from Pinacol Boronic Ester Precursors
- CoO Nanoislands as Metal Oxide Precursors for Surface-Supported Co–BDA Coordination Networks
- Insights into the formation of 3-Methyl-2-butene-1-thiol in Cannabis sativa flowers through the identification of its glutathionylated and cysteinylated precursors
BibTeX
@article{hajek2026direct,
title = {{Direct Laser-Heated Pedestal (Czochralski) Growth of Rare-Earth Zirconate A 2Zr2O7 Single Crystals from Mixed-Oxide Precursors}},
author = {Filip Hájek and Jindřich Dvořáček and Milan Klicpera},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c09265},
url = {https://pubs.acs.org/acsodf/article/11/42/65832/5452261/Direct-Laser-Heated-Pedestal-Czochralski-Growth-of},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Direct Laser-Heated Pedestal (Czochralski) Growth of Rare-Earth Zirconate A 2Zr2O7 Single Crystals from Mixed-Oxide Precursors
AU - Filip Hájek
AU - Jindřich Dvořáček
AU - Milan Klicpera
PY - 2026
DA - 2026/10/15
JO - ACS Omega
DO - 10.1021/acsomega.6c09265
UR - https://pubs.acs.org/acsodf/article/11/42/65832/5452261/Direct-Laser-Heated-Pedestal-Czochralski-Growth-of
AB - High-quality single crystals of refractory oxides are essential for fundamental investigations and advanced functional characterization, yet their preparation is frequently limited by demanding precursor processing and the extremely high temperatures required for crystal growth. Here, we present a practical, reproducible, and experimentally accessible protocol for the preparation of rare-earth zirconate A2Zr2O7 single crystals based on direct processing of mixed-oxide precursors using a laser-heated pedestal (modified Czochralski) technique. In contrast to conventional approaches employing fully reacted polycrystalline feed rods, the proposed route starts directly from homogenized stoichiometric oxide mixtures, substantially simplifying precursor preparation, therefore reducing processing time, energy consumption, handling steps, and opportunities for contamination. The manuscript focuses on the technological aspects of the preparation procedure, including precursor fabrication, optimization of crystal-growth parameters, processing considerations, as well as practical limitations, scope, and applicability of the method. The protocol was successfully applied to 11 selected A2Zr2O7 compositions (A = Y, La, Nd, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Lu), producing centimeter-scale single-crystalline ingots suitable for subsequent materials research. Representative structural and microstructural characterization confirms phase purity, crystallinity, and near-nominal cation stoichiometry, while detailed structural properties of the individual compounds are reported elsewhere. The presented methodology provides a robust and experimentally accessible route for the preparation of high-melting oxide single crystals and may be readily transferable to other refractory oxide systems requiring localized high-temperature melt growth.
SN - 2470-1343
ER -