Biodegradable Foam Synthesized from Lignin-Rich Brewer’s Spent Grain Waste with Potential Use as a Sustainable Alternative for Packaging Applications
4 affiliations
- 1South East Technological University (SETU) , , ,
- 2Kansas State University , , , ,
- 3Purdue University , , , ,
- 4Ulster University , , ,
Abstract
Biodegradable foams derived from agroindustrial residues provide a sustainable alternative to existing petroleum-based packaging, while supporting circular bioeconomy objectives. In this study, biofoams were synthesized using raw brewer’s spent grain (BSG1) and lignin-enriched residues (BSG2 and BSG3) obtained postfermentation for ethanol production. Chemical composition analysis of all BSG biomasses revealed that BSG1 contained 18.72% total lignin, whereas BSG2 and BSG3 exhibited substantially higher lignin contents of 78.28 and 83.69%, respectively, representing nearly a 4-fold increase. SEM (scanning electron microscopy) analysis showed an increase in biofoam porosity from BSG1 (0.4%) to BSG2 (7.8%) and BSG3 (13.4%), which correlated with enhanced compressive strength (0.49–0.50 MPa) and improved thickness recovery under uniaxial cyclic compression. It also exhibited reduced water absorption, from 20% in BSG1 to 7 and 11% in BSG2 and BSG3, respectively. The enhanced lignin content may have contributed to the strength and moisture resistance of the biofoams, whereas the relatively low water absorption of the processed BSG likely supported its degradation in the environment. The foams exhibited high solubility in river and seawater (48–70%) and near-complete soil degradation within 7–10 weeks, highlighting their rapid environmental decomposition. Thermal analysis (TG/DTG) confirmed the multistage degradation typical of lignocellulosic materials, with higher residual char in BSG2 and BSG3 reflecting their lignin-rich composition. Collectively, these results demonstrated that lignin-rich BSG residues can be transformed into mechanically robust, moderately porous, thermally stable, and rapidly biodegradable biofoams, combining enhanced strength, controlled hydrophilicity, and environmental compatibility. This work establishes a zero-waste cascade valorization strategy in which lignin-rich fermentation residues are upcycled into biodegradable biofoams, providing a sustainable pathway for replacing petroleum-based packaging materials.
Related
- Optical, Morphology, and Structural Characterization of Synthesized Eco‐Friendly Silver Nanoparticles for Potential Antibacterial Applications
- In-situ polymer-derived SiC/Si(B)OC ceramic nanocomposites: A sustainable potential candidate for high-temperature thermoelectric applications
- Sustainable synthesis of metallic nanoparticles and their potential biotechnological applications.
- Magnetically recyclable CoFe₂O₄@HKUST-1 nanocatalyst for sustainable carbon–nitrogen coupling, and structure-affinity relationship study of the synthesized products via molecular docking
- A Sustainable Approach: Cellulose-Based Biodegradable Water-Retaining Agents Facilitating Mine Restoration in Arid Xinjiang Mining Zones
BibTeX
@article{padinjarakavil2026biodegradable,
title = {{Biodegradable Foam Synthesized from Lignin-Rich Brewer’s Spent Grain Waste with Potential Use as a Sustainable Alternative for Packaging Applications}},
author = {Soumya Padinjarakavil and Stephen Foster and Jiao Zhang and Luke ONeill and Ji Qi and Jikai Zhao and Eun Joong Oh and Ye Huang and Caterina Brandoni and Adriana Cunha Neves},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c04668},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c04668/5453576/Biodegradable-Foam-Synthesized-from-Lignin-Rich},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Biodegradable Foam Synthesized from Lignin-Rich Brewer’s Spent Grain Waste with Potential Use as a Sustainable Alternative for Packaging Applications
AU - Soumya Padinjarakavil
AU - Stephen Foster
AU - Jiao Zhang
AU - Luke ONeill
AU - Ji Qi
AU - Jikai Zhao
AU - Eun Joong Oh
AU - Ye Huang
AU - Caterina Brandoni
AU - Adriana Cunha Neves
PY - 2026
DA - 2026/10/19
JO - ACS Omega
DO - 10.1021/acsomega.6c04668
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c04668/5453576/Biodegradable-Foam-Synthesized-from-Lignin-Rich
AB - Biodegradable foams derived from agroindustrial residues provide a sustainable alternative to existing petroleum-based packaging, while supporting circular bioeconomy objectives. In this study, biofoams were synthesized using raw brewer’s spent grain (BSG1) and lignin-enriched residues (BSG2 and BSG3) obtained postfermentation for ethanol production. Chemical composition analysis of all BSG biomasses revealed that BSG1 contained 18.72% total lignin, whereas BSG2 and BSG3 exhibited substantially higher lignin contents of 78.28 and 83.69%, respectively, representing nearly a 4-fold increase. SEM (scanning electron microscopy) analysis showed an increase in biofoam porosity from BSG1 (0.4%) to BSG2 (7.8%) and BSG3 (13.4%), which correlated with enhanced compressive strength (0.49–0.50 MPa) and improved thickness recovery under uniaxial cyclic compression. It also exhibited reduced water absorption, from 20% in BSG1 to 7 and 11% in BSG2 and BSG3, respectively. The enhanced lignin content may have contributed to the strength and moisture resistance of the biofoams, whereas the relatively low water absorption of the processed BSG likely supported its degradation in the environment. The foams exhibited high solubility in river and seawater (48–70%) and near-complete soil degradation within 7–10 weeks, highlighting their rapid environmental decomposition. Thermal analysis (TG/DTG) confirmed the multistage degradation typical of lignocellulosic materials, with higher residual char in BSG2 and BSG3 reflecting their lignin-rich composition. Collectively, these results demonstrated that lignin-rich BSG residues can be transformed into mechanically robust, moderately porous, thermally stable, and rapidly biodegradable biofoams, combining enhanced strength, controlled hydrophilicity, and environmental compatibility. This work establishes a zero-waste cascade valorization strategy in which lignin-rich fermentation residues are upcycled into biodegradable biofoams, providing a sustainable pathway for replacing petroleum-based packaging materials.
SN - 2470-1343
ER -