Nanoparticle type-dependent regulation of polydopamine coating formation and wettability.
- 1Faculty of Polymer Engineering, Sahand University of Technology P.O. Box: 51335-1996 Tabriz Iran [email protected].
- 2Department of Chemical and Petroleum Engineering, University of Calgary 2500 University Dr NW Calgary T2N 1N4 Canada.
- 3Department of Chemistry, University of British Columbia P.O, Box: V6T 1Z3 Vancouver British Columbia Canada.
Abstract
Polydopamine (PDA) has emerged as a versatile surface modification material because of its universal adhesion and ability to tailor surface properties. However, although various nanomaterials have been incorporated into PDA coatings, the influence of nanoparticle morphology on dopamine polymerization, coating formation, and the resulting surface wettability has not been systematically investigated. In this study, four nanoparticles representing three structural dimensionalities, namely carbon quantum dots (CQDs) and silica nanoparticles (SiO₂) as 0D nanomaterials, halloysite nanotubes (HNTs) as 1D nanomaterials, and graphene oxide (GO) nanosheets as a 2D nanomaterial, were comparatively evaluated as regulators of PDA coating formation. Dopamine oxidation in the solution phase was monitored by UV-vis spectroscopy, while the resulting coatings were characterized using colorimetry as an indicator of film thickness, field-emission scanning electron microscopy (FESEM) to examine the morphology of the films, atomic force microscopy (AFM) to measure surface roughness, and static water contact angle (WCA) measurements to investigate the interaction of water droplets with the surface of the resulting coatings. The results demonstrate that nanoparticle morphology markedly influences dopamine polymerization, PDA deposition, and coating morphology. Among the investigated systems, CQD-PDA coatings exhibited the largest surface aggregates (323 ± 65 nm) and the highest surface roughness (R a = 114 ± 5.5 nm, R q = 163 ± 19 nm), indicating enhanced coating growth. Subsequent deposition of a thin polydimethylsiloxane (PDMS) layer on the optimized CQD-PDA coating increased the WCA to 119°, while maintaining a WCA of approximately 90° after five ultrasonication cycles and 103° after five water-impact cycles, demonstrating good coating durability. These findings establish nanoparticle morphology as a key parameter governing PDA coating formation and provide a simple, morphology-directed strategy for fabricating functional coatings with controllable wettability.
Related
- Wettability-Tuned Polydopamine-Modified Surfaces for Enhanced Dropwise Condensation and Water Harvesting
- Polyoxometalate-controlled oxidative formation of bioinspired polydopamine hydrogels
- Composition-Dependent Wettability, Moisture Sorption and Adhesion of HPMC, Carbopol and Kollidon Binary Matrices to a Model Mucin Layer: An In Vitro Study
- Isolating Ligand Steric Effects on Metal Ion Reduction and Gold Nanoparticle Formation Pathways Using Au(I)-Phosphine Complexes.
- Steady-State Fluorescence and Excitation–Emission Matrix Analysis of Sunlight-Assisted Silver Nanoparticle Formation Using Cucurbita pepo Peel Extract
BibTeX
@article{saberi2026nanoparticle,
title = {{Nanoparticle type-dependent regulation of polydopamine coating formation and wettability.}},
author = {Meysam Saberi and Ebrahim Jalilnia and Rozita Kazemi and Amir Rezvani-Moghaddam and Hossein Yazdani-Ahmadabadi and Mehdi Salami-Kalajahi},
journal = {RSC advances},
year = {2026},
month = oct,
doi = {10.1039/d6ra07246a},
url = {https://europepmc.org/article/MED/42846238},
note = {CC BY},
}
RIS
TY - JOUR
TI - Nanoparticle type-dependent regulation of polydopamine coating formation and wettability.
AU - Meysam Saberi
AU - Ebrahim Jalilnia
AU - Rozita Kazemi
AU - Amir Rezvani-Moghaddam
AU - Hossein Yazdani-Ahmadabadi
AU - Mehdi Salami-Kalajahi
PY - 2026
DA - 2026/10/07
JO - RSC advances
DO - 10.1039/d6ra07246a
UR - https://europepmc.org/article/MED/42846238
AB - Polydopamine (PDA) has emerged as a versatile surface modification material because of its universal adhesion and ability to tailor surface properties. However, although various nanomaterials have been incorporated into PDA coatings, the influence of nanoparticle morphology on dopamine polymerization, coating formation, and the resulting surface wettability has not been systematically investigated. In this study, four nanoparticles representing three structural dimensionalities, namely carbon quantum dots (CQDs) and silica nanoparticles (SiO₂) as 0D nanomaterials, halloysite nanotubes (HNTs) as 1D nanomaterials, and graphene oxide (GO) nanosheets as a 2D nanomaterial, were comparatively evaluated as regulators of PDA coating formation. Dopamine oxidation in the solution phase was monitored by UV-vis spectroscopy, while the resulting coatings were characterized using colorimetry as an indicator of film thickness, field-emission scanning electron microscopy (FESEM) to examine the morphology of the films, atomic force microscopy (AFM) to measure surface roughness, and static water contact angle (WCA) measurements to investigate the interaction of water droplets with the surface of the resulting coatings. The results demonstrate that nanoparticle morphology markedly influences dopamine polymerization, PDA deposition, and coating morphology. Among the investigated systems, CQD-PDA coatings exhibited the largest surface aggregates (323 ± 65 nm) and the highest surface roughness (R a = 114 ± 5.5 nm, R q = 163 ± 19 nm), indicating enhanced coating growth. Subsequent deposition of a thin polydimethylsiloxane (PDMS) layer on the optimized CQD-PDA coating increased the WCA to 119°, while maintaining a WCA of approximately 90° after five ultrasonication cycles and 103° after five water-impact cycles, demonstrating good coating durability. These findings establish nanoparticle morphology as a key parameter governing PDA coating formation and provide a simple, morphology-directed strategy for fabricating functional coatings with controllable wettability.
SN - 2046-2069
ER -