Effect of heat and steam bending on the longitudinal and radial mechanical properties and derived acoustical indices of spruce and maple wood
Abstract
This study investigates the effects of steam and heat bending on the longitudinal and radial vibro-mechanical properties of spruce (Picea abies) and maple (Acer spp.). More than 100 thin beams were bent to nominal strain levels of approximately 0.7 % and compared to reference specimens using laser vibrometry and modal analysis combined with finite element model updating. X-ray microtomography (2 μm voxel size) was performed on selected specimens to examine the cellular-scale integrity after bending. After re-conditioning at 50 % RH and 25 °C, density showed no statistically significant change. A modest reduction in longitudinal stiffness was observed, more pronounced in spruce, while the longitudinal loss factor increased significantly for both species, leading to decreased radiation ratio and acoustic conversion efficiency indices, particularly in spruce. These results provide quantitative trends relevant to manufacturing of bent wood, the mechanical and vibroacoustical design of bent wood parts and structures.
Related
- Tuning mechanical, barrier and water resistance properties of pectin films through almond shell-derived nanocellulose reinforcement and Ca 2+ crosslinking
- Additive manufacturing of a Ni-20 wt%Cr binary alloy by laser powder bed fusion: Impact of the microstructure on the mechanical properties
- Atomic investigations on the mechanical properties of CoCrNi medium-entropy alloy nanowires
- A Novel Nb-Based Eutectic Superalloy with Exceptional Ultrahigh-Temperature Mechanical Properties
- Mechanical properties of V-4Ti-4Cr alloy from molecular dynamics with a neural-network potential
BibTeX
@article{quintavalla2026effect,
title = {{Effect of heat and steam bending on the longitudinal and radial mechanical properties and derived acoustical indices of spruce and maple wood}},
author = {Martino Quintavalla and Jérémy Cabaret and Maurizio Santini and Romain Viala},
journal = {Holzforschung},
year = {2026},
month = sep,
doi = {10.1515/hf-2025-0114},
url = {https://hal.science/hal-05756461v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Effect of heat and steam bending on the longitudinal and radial mechanical properties and derived acoustical indices of spruce and maple wood
AU - Martino Quintavalla
AU - Jérémy Cabaret
AU - Maurizio Santini
AU - Romain Viala
PY - 2026
DA - 2026/09/24
JO - Holzforschung
DO - 10.1515/hf-2025-0114
UR - https://hal.science/hal-05756461v1
AB - This study investigates the effects of steam and heat bending on the longitudinal and radial vibro-mechanical properties of spruce (Picea abies) and maple (Acer spp.). More than 100 thin beams were bent to nominal strain levels of approximately 0.7 % and compared to reference specimens using laser vibrometry and modal analysis combined with finite element model updating. X-ray microtomography (2 μm voxel size) was performed on selected specimens to examine the cellular-scale integrity after bending. After re-conditioning at 50 % RH and 25 °C, density showed no statistically significant change. A modest reduction in longitudinal stiffness was observed, more pronounced in spruce, while the longitudinal loss factor increased significantly for both species, leading to decreased radiation ratio and acoustic conversion efficiency indices, particularly in spruce. These results provide quantitative trends relevant to manufacturing of bent wood, the mechanical and vibroacoustical design of bent wood parts and structures.
SN - 0018-3830
SN - 1437-434X
ER -