Ramie Elementary Fiber-Reinforced Chitosan Composite Films: Mechanical Properties and Structural Characterization
- 1College of Agricultural Engineering, , Taigu 030801, China; (J.W.); (P.L.); (Y.Z.)
- 2College of Food Science and Engineering, , Taigu 030801, China;
- 3College of Forestry, , Taigu 030801, China;
Abstract
Chitosan films have attracted increasing attention as biodegradable packaging materials; however, their relatively low stiffness and limited mechanical stability restrict their practical application. In this study, ramie elementary fiber-reinforced chitosan composite films were prepared using ramie elementary fiber suspensions at concentrations of 0, 0.5, 1.0, and 1.5 g/L. The mechanical properties, chemical interactions, crystalline structure, and surface morphology of the composite films were systematically investigated by tensile testing, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results showed that the incorporation of ramie elementary fibers significantly affected the mechanical behavior of chitosan films. Among the tested concentrations, the composite film with 0.5 g/L ramie elementary fibers exhibited the best overall performance, with the elastic modulus increasing by 130% from 67.46 MPa to 155.14 MPa compared with the pure chitosan film. FTIR analysis indicated that the formation of hydrogen-bonding between ramie elementary fibers and the chitosan matrix, while XRD results showed that the incorporation of ramie elementary fibers enhanced the structural ordering of the chitosan-based composite films without forming a new crystalline phase. SEM observations further confirmed that an appropriate fiber content promoted uniform dispersion and good interfacial bonding, whereas excessive fiber addition led to aggregation, surface roughening, and interfacial defects. These findings demonstrate that low-content ramie elementary fibers can effectively improve the stiffness and structural stability of chitosan composite films, providing a potential strategy for developing biodegradable fiber-reinforced packaging materials.
Related
- Investigation of the effect of gamma radiation on the mechanical properties of nanoclay-reinforced composite plates
- Mechanical Recovery of Damaged Glass Fiber Reinforced Polypropylene via Repetitive Sub-Melting Thermal Annealing: A Molecular and Structural Study
- Effect of Annealing on the Mechanical Properties of Carbon Fiber-Reinforced PLA
- Overcoming the Performance Cliff at High Loadings: Enhanced Mechanical, Dielectric, and Rheological Properties of PBT Composites Reinforced with Flat Glass Fibers
- Novel Lead-free double perovskite Cs2LiFeBr6 as photovoltaics: a DFT study of structural, mechanical, spin-resolved electronic and optical properties
BibTeX
@article{li2026ramie,
title = {{Ramie Elementary Fiber-Reinforced Chitosan Composite Films: Mechanical Properties and Structural Characterization}},
author = {Hongbo Li and Jiamin Wang and Pengchen Lu and Yaping Liu and Yu Xian and Yanqing Zhang},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18192413},
url = {https://europepmc.org/article/PMC/PMC13666580},
note = {CC BY},
}
RIS
TY - JOUR
TI - Ramie Elementary Fiber-Reinforced Chitosan Composite Films: Mechanical Properties and Structural Characterization
AU - Hongbo Li
AU - Jiamin Wang
AU - Pengchen Lu
AU - Yaping Liu
AU - Yu Xian
AU - Yanqing Zhang
PY - 2026
DA - 2026/10/01
JO - Polymers
DO - 10.3390/polym18192413
UR - https://europepmc.org/article/PMC/PMC13666580
AB - Chitosan films have attracted increasing attention as biodegradable packaging materials; however, their relatively low stiffness and limited mechanical stability restrict their practical application. In this study, ramie elementary fiber-reinforced chitosan composite films were prepared using ramie elementary fiber suspensions at concentrations of 0, 0.5, 1.0, and 1.5 g/L. The mechanical properties, chemical interactions, crystalline structure, and surface morphology of the composite films were systematically investigated by tensile testing, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results showed that the incorporation of ramie elementary fibers significantly affected the mechanical behavior of chitosan films. Among the tested concentrations, the composite film with 0.5 g/L ramie elementary fibers exhibited the best overall performance, with the elastic modulus increasing by 130% from 67.46 MPa to 155.14 MPa compared with the pure chitosan film. FTIR analysis indicated that the formation of hydrogen-bonding between ramie elementary fibers and the chitosan matrix, while XRD results showed that the incorporation of ramie elementary fibers enhanced the structural ordering of the chitosan-based composite films without forming a new crystalline phase. SEM observations further confirmed that an appropriate fiber content promoted uniform dispersion and good interfacial bonding, whereas excessive fiber addition led to aggregation, surface roughening, and interfacial defects. These findings demonstrate that low-content ramie elementary fibers can effectively improve the stiffness and structural stability of chitosan composite films, providing a potential strategy for developing biodegradable fiber-reinforced packaging materials.
SN - 2073-4360
ER -