Sustainable one-part geopolymeric hybrid composite derived from glauconite, talc, and olive seed waste–based activated carbon for Congo red adsorption
- 1Chemical Engineering Department, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, 11432, Saudi Arabia
- 2Faculty of Earth Science, Beni-Suef University, Beni, Suef, 62511, Egypt. [email protected]
- 3Department of Refractories, Ceramics, and Building Materials, National Research Centre, P.O. 12622, 33 El Bohooth st. (former El Tahrir st.), Dokki, Cairo, Giza, Egypt
Abstract
This study details the synthesis and application of a novel one-part geopolymeric hybrid composite (OP-GPHC) derived from glauconite, talc, and olive seed waste-based activated carbon for the efficient sequestration of Congo red (CR) dye from contaminated water. The hybrid binder was synthesized by impregnating activated carbon-based biogenic waste into a thermally treated glauconite/talc matrix, followed by alkali-activation with NaOH. Comprehensive characterization via XRD, FTIR, BET, TG/DTG, FESEM/EDX, and elemental mapping confirmed the material's exceptional adsorptive properties. A Box-Behnken design (BBD) optimization established the optimal operational conditions: pH 2.0, adsorbent dosage 0.07 g/ 25 ml, contact time 77.5 min, initial CR concentration 150 mg/L, and temperature 328 K, achieving a removal efficiency of 99.2%. Equilibrium data were best described by the Langmuir isotherm, yielding a maximum adsorption capacity of 367 mg/g at 328 K, while kinetic data followed the pseudo-first-order (PFO) model. Advanced statistical physics modeling revealed a multimolecular adsorption mechanism with a vertical orientation of CR molecules at the active sites, independent of temperature, and binding energies in the range of 19.25-21.46 kJ/mol, consistent with physisorption dominated by hydrogen bonding, π-π interactions, and electrostatic forces. Thermodynamic parameters confirmed the endothermic and spontaneous nature of the process. The OP-GPHC adsorbent exhibited excellent reusability (87.8% after five cycles) and a low production cost of $0.032/g. Based on batch-derived data, treatment of 100 L of CR-contaminated water (50 mg/L) is projected to cost approximately $1.68, highlighting its strong potential for industrial-scale tertiary treatment applications.
Related
- Interpretable machine learning and greenness assessment for sustainable tetracycline adsorption and phytotoxicity mitigation using almond peel – derived activated carbon
- Efficient removal of regorafenib from aqueous solutions using KOH-activated hazelnut husk-derived activated carbon: adsorption mechanism, kinetics, isotherms and thermodynamics
- Humidity-dependent formaldehyde adsorption on porous frameworks: A comparative study of MOFs, zeolites, and activated carbon
- Extended evaluation of activated carbon-embedded glucomannan membranes for the adsorption of structurally and charge-distinct dyes.
- Eco-friendly activated carbon derived from pomegranate peel for amoxicillin removal: batch adsorption, kinetic modeling, and thermodynamics
BibTeX
@article{gadallah2026sustainable,
title = {{Sustainable one-part geopolymeric hybrid composite derived from glauconite, talc, and olive seed waste–based activated carbon for Congo red adsorption}},
author = {Abdelrahman G. Gadallah and Ahmed S. Elshimy and Ahmed A. Hegazy and Mohammod H. Rahman},
journal = {Scientific Reports},
year = {2026},
month = may,
doi = {10.1038/s41598-026-50411-7},
url = {https://doi.org/10.1038/s41598-026-50411-7},
note = {CC BY},
}
RIS
TY - JOUR
TI - Sustainable one-part geopolymeric hybrid composite derived from glauconite, talc, and olive seed waste–based activated carbon for Congo red adsorption
AU - Abdelrahman G. Gadallah
AU - Ahmed S. Elshimy
AU - Ahmed A. Hegazy
AU - Mohammod H. Rahman
PY - 2026
DA - 2026/05/22
JO - Scientific Reports
DO - 10.1038/s41598-026-50411-7
UR - https://doi.org/10.1038/s41598-026-50411-7
AB - This study details the synthesis and application of a novel one-part geopolymeric hybrid composite (OP-GPHC) derived from glauconite, talc, and olive seed waste-based activated carbon for the efficient sequestration of Congo red (CR) dye from contaminated water. The hybrid binder was synthesized by impregnating activated carbon-based biogenic waste into a thermally treated glauconite/talc matrix, followed by alkali-activation with NaOH. Comprehensive characterization via XRD, FTIR, BET, TG/DTG, FESEM/EDX, and elemental mapping confirmed the material's exceptional adsorptive properties. A Box-Behnken design (BBD) optimization established the optimal operational conditions: pH 2.0, adsorbent dosage 0.07 g/ 25 ml, contact time 77.5 min, initial CR concentration 150 mg/L, and temperature 328 K, achieving a removal efficiency of 99.2%. Equilibrium data were best described by the Langmuir isotherm, yielding a maximum adsorption capacity of 367 mg/g at 328 K, while kinetic data followed the pseudo-first-order (PFO) model. Advanced statistical physics modeling revealed a multimolecular adsorption mechanism with a vertical orientation of CR molecules at the active sites, independent of temperature, and binding energies in the range of 19.25-21.46 kJ/mol, consistent with physisorption dominated by hydrogen bonding, π-π interactions, and electrostatic forces. Thermodynamic parameters confirmed the endothermic and spontaneous nature of the process. The OP-GPHC adsorbent exhibited excellent reusability (87.8% after five cycles) and a low production cost of $0.032/g. Based on batch-derived data, treatment of 100 L of CR-contaminated water (50 mg/L) is projected to cost approximately $1.68, highlighting its strong potential for industrial-scale tertiary treatment applications.
SN - 2045-2322
ER -