Patient-specific finite element analysis of immediate loading in the edentulous maxilla: A single-case biomechanical evaluation of three implant configurations
Abstract
Aim: Finite element analysis (FEA) is widely used in implant prosthodontics to assess biomechanical behavior and support treatment planning in complex edentulous cases. This work aimed to evaluate stress distribution patterns associated with three implant configurations (all-on-four, all-on-six, and quad-zygomatic) in the edentulous maxilla using a single patient-specific finite element model under immediate loading conditions. Settings and Design: Two CBCT scans from a single edentulous patient, acquired before and after full-arch bone grafting, were segmented to generate three digital twin models including the maxilla, implants, abutments, and a full-arch prosthesis. Materials and Methods: A unilateral oblique load of 150 N at 45° was applied to the posterior region of the prosthesis using a non-deformable distribution tool to simulate immediate functional loading. Stress distribution and displacement patterns within bone and prosthetic components were evaluated. Statistical Analysis Used: A descriptive biomechanical evaluation based on stress magnitude and distribution patterns was conducted.
Results:The simulations demonstrated distinct biomechanical responses among the implant configurations. The all-on-six model showed a more uniform stress distribution with lower peak stress values compared to the other configurations. In this model, the difference between tensile and compressive cortical stress peaks was reduced relative to the all-on-four and quad-zygomatic configurations. In all scenarios, stress values remained within physiological limits reported for bone tissue. Conclusion: Within the limitations of a single patient-specific model and the absence of inferential statistical analysis, this single-case biomechanical evaluation suggests that digital twin-based finite element analysis may serve as an exploratory tool for biomechanical assessment and prosthodontic treatment planning in implant-supported rehabilitation of the edentulous maxilla.
Related
- Prefrontal gamma oscillations engage dynamic cell-type-specific configurations to support flexible behavior
- Biomechanical effects of load-carrying in adolescent idiopathic scoliosis: a subject-specific musculoskeletal modelling study
- De Novo Design and AlphaFold3 Evaluation of Protein Binders Targeting Specific Sites of MAP4K4
- Systematic Evaluation of Nasal Immune Cell Sampling and Antigen-specific T cell Detection using Cryopreserved Nasal Swabs
- Computational Design and Evaluation of De Novo Protein Minibinders Targeting Specific Sites of STAT3
BibTeX
@article{latreche2026patientspecific,
title = {{Patient-specific finite element analysis of immediate loading in the edentulous maxilla: A single-case biomechanical evaluation of three implant configurations}},
author = {Sarah Latreche and Olina Rios and Franck Afota and Charles Savoldelli and Yannick Tillier},
journal = {Journal of Indian Prosthodontic Society},
year = {2026},
month = oct,
doi = {10.4103/jips.jips_619_25},
url = {https://minesparis-psl.hal.science/hal-05778167v1},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Patient-specific finite element analysis of immediate loading in the edentulous maxilla: A single-case biomechanical evaluation of three implant configurations
AU - Sarah Latreche
AU - Olina Rios
AU - Franck Afota
AU - Charles Savoldelli
AU - Yannick Tillier
PY - 2026
DA - 2026/10/01
JO - Journal of Indian Prosthodontic Society
DO - 10.4103/jips.jips_619_25
UR - https://minesparis-psl.hal.science/hal-05778167v1
AB - Aim: Finite element analysis (FEA) is widely used in implant prosthodontics to assess biomechanical behavior and support treatment planning in complex edentulous cases. This work aimed to evaluate stress distribution patterns associated with three implant configurations (all-on-four, all-on-six, and quad-zygomatic) in the edentulous maxilla using a single patient-specific finite element model under immediate loading conditions. Settings and Design: Two CBCT scans from a single edentulous patient, acquired before and after full-arch bone grafting, were segmented to generate three digital twin models including the maxilla, implants, abutments, and a full-arch prosthesis. Materials and Methods: A unilateral oblique load of 150 N at 45° was applied to the posterior region of the prosthesis using a non-deformable distribution tool to simulate immediate functional loading. Stress distribution and displacement patterns within bone and prosthetic components were evaluated. Statistical Analysis Used: A descriptive biomechanical evaluation based on stress magnitude and distribution patterns was conducted. Results:The simulations demonstrated distinct biomechanical responses among the implant configurations. The all-on-six model showed a more uniform stress distribution with lower peak stress values compared to the other configurations. In this model, the difference between tensile and compressive cortical stress peaks was reduced relative to the all-on-four and quad-zygomatic configurations. In all scenarios, stress values remained within physiological limits reported for bone tissue. Conclusion: Within the limitations of a single patient-specific model and the absence of inferential statistical analysis, this single-case biomechanical evaluation suggests that digital twin-based finite element analysis may serve as an exploratory tool for biomechanical assessment and prosthodontic treatment planning in implant-supported rehabilitation of the edentulous maxilla.
SN - 0972-4052
ER -