Mechanical Properties of Glassy Brush Particle Solids Featuring Chain Dispersity.
- 1Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania15213, United States.
- 2Chemistry Department, Carnegie Mellon University, Pittsburgh, Pennsylvania15213, United States.
Abstract
The modification of nanoparticles with polymer chains has emerged as a versatile platform to enable hybrid particle building blocks that can be assembled into functional materials with controlled microstructure and enhanced mechanical or physical properties. Often, a combination of high inorganic loading and mechanical strength is desired. Brush chain dispersity is shown to be an effective design parameter to balance Young's modulus, fracture toughness, and inorganic loading with synthetic versatility. Poly(methyl methacrylate) brush particle model systems with similar grafting density but varied chain dispersity in the range of 1.1 < Đ < 2 were synthesized by varying catalyst concentration in surface-initiated atom transfer radical polymerization (SI-ATRP). Tensile testing revealed an increase of the toughness of brush particle solids with dispersity, whereas the elastic modulus was unaffected. The increased fracture resistance could be attributed to the positively skewed molecular weight distribution of grafted chains, which promoted chain entanglement and craze formation even for low-molecular weight brush chains (i.e., with an average degree of polymerization below the entanglement limit). This renders the "toughening effect" of chain dispersity particularly beneficial for improving the durability of low-molecular brush particle solids (i.e., brush particle solids with high inorganic content) that are susceptible to fracture.
Related
- Synthesis of silver modified bioactive glassy materials with antibacterial properties via facile and low-temperature route
- Effect of Polymer Matrix Type and Particle-Size Distribution on the Mechanical, Microstructural, and Thermal Behavior of Waste Tire Rubber Composites
- Direct Laser Writing of Functional Material with Independently Tunable Electrical and Mechanical Properties
- Porosity Formation Mechanisms and Their Effects on the Mechanical Properties of High-Density Polyethylene Extrusion Welds
- Investigation of the effect of gamma radiation on the mechanical properties of nanoclay-reinforced composite plates
BibTeX
@article{abdullah2026mechanical,
title = {{Mechanical Properties of Glassy Brush Particle Solids Featuring Chain Dispersity.}},
author = {Ayesha Abdullah and Hanshu Wu and Yuqi Zhao and Jaejun Lee and Jiajun Yan and Krzysztof Matyjaszewski and Michael R Bockstaller},
journal = {Langmuir : the ACS journal of surfaces and colloids},
year = {2026},
month = sep,
doi = {10.1021/acs.langmuir.6c02933},
url = {https://europepmc.org/article/MED/42915201},
note = {CC BY},
}
RIS
TY - JOUR
TI - Mechanical Properties of Glassy Brush Particle Solids Featuring Chain Dispersity.
AU - Ayesha Abdullah
AU - Hanshu Wu
AU - Yuqi Zhao
AU - Jaejun Lee
AU - Jiajun Yan
AU - Krzysztof Matyjaszewski
AU - Michael R Bockstaller
PY - 2026
DA - 2026/09/01
JO - Langmuir : the ACS journal of surfaces and colloids
DO - 10.1021/acs.langmuir.6c02933
UR - https://europepmc.org/article/MED/42915201
AB - The modification of nanoparticles with polymer chains has emerged as a versatile platform to enable hybrid particle building blocks that can be assembled into functional materials with controlled microstructure and enhanced mechanical or physical properties. Often, a combination of high inorganic loading and mechanical strength is desired. Brush chain dispersity is shown to be an effective design parameter to balance Young's modulus, fracture toughness, and inorganic loading with synthetic versatility. Poly(methyl methacrylate) brush particle model systems with similar grafting density but varied chain dispersity in the range of 1.1 < Đ < 2 were synthesized by varying catalyst concentration in surface-initiated atom transfer radical polymerization (SI-ATRP). Tensile testing revealed an increase of the toughness of brush particle solids with dispersity, whereas the elastic modulus was unaffected. The increased fracture resistance could be attributed to the positively skewed molecular weight distribution of grafted chains, which promoted chain entanglement and craze formation even for low-molecular weight brush chains (i.e., with an average degree of polymerization below the entanglement limit). This renders the "toughening effect" of chain dispersity particularly beneficial for improving the durability of low-molecular brush particle solids (i.e., brush particle solids with high inorganic content) that are susceptible to fracture.
SN - 0743-7463
SN - 1520-5827
ER -