Response-Surface-Guided Extraction and Copper Modification of Nanocellulose from Corn Cob and Hemp Hurds: Source- and Loading-Dependent Structural and Electrochemical Properties
- 1Department of Materials Science and Nanotechnology Engineering, Faculty of Engineering, Yeditepe University, 34755 Istanbul, Türkiye
Abstract
Agricultural residues offer a source of nanocellulose for developing functional composites. This study examined how biomass source, extraction conditions, and copper loading affect the structural and electrochemical properties of nanocellulose derived from hemp hurds and corn cob. A citric-acid-assisted chemical–mechanical extraction route was investigated using response surface methodology, with extraction cycle number and sonication time as factors and FTIR-derived total crystallinity index and SEM-derived apparent fiber size as responses. The selected conditions were three cycles and 120 min for hemp hurds and three cycles and 75 min for corn cob, yielding measured mean apparent fiber sizes of 83.3 and 100 nm, respectively. Nanocellulose was modified with nominal Cu loadings of 15, 25, 50, and 75 wt%. At 0.1 Hz, impedance magnitude decreased from 274.15 and 247.67 kΩ for the respective bare references to below 10 kΩ for all Cu-modified groups. Cu incorporation also increased cycle-5 passed charge, with the corn-cob series showing its highest mean response at 50 wt%. FTIR, SEM, TGA, and XRD supported cellulose enrichment, nanoscale fibrillation, source-dependent thermal behavior, and crystalline metallic Cu formation. These findings support further evaluation of Cu-modified nanocellulose for electrochemical applications.
Related
- Multifunctional structural, optical, magnetic and electrochemical properties of Co-ZnO nanoparticles for supercapacitor applications
- Structural properties and electrochemical performance of the polyanionic Na₄Fe₃(PO₄)₂(P₂O₇)@C cathode at lower cutoff potentials for sodium-ion batteries.
- Acid-mediated extraction of gelatine from chicken by-products: impact on yield, molecular characteristics, and structural-thermal properties
- Influence of gradient Ni incorporation on the structural, surface, and electrochemical properties of LiCoO₂ thin-film cathodes.
- Surface modification strategies for carbon nanotubes and graphene materials: advances in electrochemical catalysis
BibTeX
@article{ranjbarnavazi2026responsesurfaceguided,
title = {{Response-Surface-Guided Extraction and Copper Modification of Nanocellulose from Corn Cob and Hemp Hurds: Source- and Loading-Dependent Structural and Electrochemical Properties}},
author = {Zahra Ranjbar-Navazi},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18202547},
url = {https://www.mdpi.com/2073-4360/18/20/2547},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Response-Surface-Guided Extraction and Copper Modification of Nanocellulose from Corn Cob and Hemp Hurds: Source- and Loading-Dependent Structural and Electrochemical Properties
AU - Zahra Ranjbar-Navazi
PY - 2026
DA - 2026/10/16
JO - Polymers
DO - 10.3390/polym18202547
UR - https://www.mdpi.com/2073-4360/18/20/2547
AB - Agricultural residues offer a source of nanocellulose for developing functional composites. This study examined how biomass source, extraction conditions, and copper loading affect the structural and electrochemical properties of nanocellulose derived from hemp hurds and corn cob. A citric-acid-assisted chemical–mechanical extraction route was investigated using response surface methodology, with extraction cycle number and sonication time as factors and FTIR-derived total crystallinity index and SEM-derived apparent fiber size as responses. The selected conditions were three cycles and 120 min for hemp hurds and three cycles and 75 min for corn cob, yielding measured mean apparent fiber sizes of 83.3 and 100 nm, respectively. Nanocellulose was modified with nominal Cu loadings of 15, 25, 50, and 75 wt%. At 0.1 Hz, impedance magnitude decreased from 274.15 and 247.67 kΩ for the respective bare references to below 10 kΩ for all Cu-modified groups. Cu incorporation also increased cycle-5 passed charge, with the corn-cob series showing its highest mean response at 50 wt%. FTIR, SEM, TGA, and XRD supported cellulose enrichment, nanoscale fibrillation, source-dependent thermal behavior, and crystalline metallic Cu formation. These findings support further evaluation of Cu-modified nanocellulose for electrochemical applications.
SN - 2073-4360
ER -