Toluene adsorption studies on carbon-based materials under controlled temperature, humidity, flow rate, and toluene concentration, using a high-precision dynamic adsorption set-up
Abstract
Volatile organic compounds (VOC) can have harmful effects on human health. Physisorption using carbon-based materials is one of the most commonly used methods for removing toxic VOC from indoor air. In this study, three carbon-based materials, including hydrophilic granular activated carbons (GAC1 and GAC2) and hydrophobic Carbotrap X (CX), were investigated for toluene adsorption using a novel dynamic set-up. The efficiency of toluene removal can vary depending on several experimental factors. Therefore, adsorption experiments were conducted under stable and precisely controlled conditions of temperature, humidity, flow rate, and pollutant concentration. Our findings show that adsorption temperature, high humidity, and the textural properties of the materials can influence toluene adsorption capacity. Additionally, pollutant concentration plays a role, as demonstrated by adsorption isotherm models such as Langmuir, Freundlich, Temkin, and Redlich-Peterson. The results indicate that GAC1, with its large specific surface area (SSA = 974 m²/g) and high micropore content (>80%), is a promising material for toluene physisorption in indoor air at a medium relative humidity (≤ 50% RH). Its adsorption capacity can reach up to 342 ± 41 mg/g under conditions of 14-20 mg adsorbent mass, 23 • C, 50% relative humidity, and 40-200 mL/min flow rate. Notably, hydrophobic CX shows potential as an effective VOC adsorbent material, particularly in extremely high-humidity environments.
Related
- Modelling the Temperature Dependence of Activity Coefficients for Mixture Adsorption in Microporous Materials
- Energy-Efficient and Low-Temperature Gaseous Concentration Swing Adsorption (GCSA)-Based Regeneration Method Utilizing Hydrogen Sweep for Direct Air Capture
- Effect of Crosslinker Concentration on Polyacrylic Acid Hydrogel for H2S Adsorption: Molecular Dynamic Simulation Study
- Beyond Materials Rankings: When Adsorption or Membranes Win for CO2/CH4 Separation
- Development of hybrid amine-functionalized diatom-based materials for efficient formaldehyde adsorption under dry and humid conditions
BibTeX
@article{tran2026toluene,
title = {{Toluene adsorption studies on carbon-based materials under controlled temperature, humidity, flow rate, and toluene concentration, using a high-precision dynamic adsorption set-up}},
author = {Thi Tuyen Tran and Romain Severac and Anaïs Becker and Marion Douard and Vasiliki Papaefthymiou and Guy Schlatter and Anne Hébraud and Stéphane Le Calvé},
journal = {Journal of Environmental Chemical Engineering},
year = {2026},
month = oct,
doi = {10.1016/j.jece.2026.122017},
url = {https://hal.science/hal-05846155v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Toluene adsorption studies on carbon-based materials under controlled temperature, humidity, flow rate, and toluene concentration, using a high-precision dynamic adsorption set-up
AU - Thi Tuyen Tran
AU - Romain Severac
AU - Anaïs Becker
AU - Marion Douard
AU - Vasiliki Papaefthymiou
AU - Guy Schlatter
AU - Anne Hébraud
AU - Stéphane Le Calvé
PY - 2026
DA - 2026/10/30
JO - Journal of Environmental Chemical Engineering
DO - 10.1016/j.jece.2026.122017
UR - https://hal.science/hal-05846155v1
AB - Volatile organic compounds (VOC) can have harmful effects on human health. Physisorption using carbon-based materials is one of the most commonly used methods for removing toxic VOC from indoor air. In this study, three carbon-based materials, including hydrophilic granular activated carbons (GAC1 and GAC2) and hydrophobic Carbotrap X (CX), were investigated for toluene adsorption using a novel dynamic set-up. The efficiency of toluene removal can vary depending on several experimental factors. Therefore, adsorption experiments were conducted under stable and precisely controlled conditions of temperature, humidity, flow rate, and pollutant concentration. Our findings show that adsorption temperature, high humidity, and the textural properties of the materials can influence toluene adsorption capacity. Additionally, pollutant concentration plays a role, as demonstrated by adsorption isotherm models such as Langmuir, Freundlich, Temkin, and Redlich-Peterson. The results indicate that GAC1, with its large specific surface area (SSA = 974 m²/g) and high micropore content (>80%), is a promising material for toluene physisorption in indoor air at a medium relative humidity (≤ 50% RH). Its adsorption capacity can reach up to 342 ± 41 mg/g under conditions of 14-20 mg adsorbent mass, 23 • C, 50% relative humidity, and 40-200 mL/min flow rate. Notably, hydrophobic CX shows potential as an effective VOC adsorbent material, particularly in extremely high-humidity environments.
SN - 2213-3437
SN - 2213-2929
ER -