Development of hybrid amine-functionalized diatom-based materials for efficient formaldehyde adsorption under dry and humid conditions
Abstract
Diatomite was functionalized with 3-aminopropyltriethoxysilane (APTES) to develop efficient adsorbents for formaldehyde removal. Two APTES grafting strategies were used to optimize adsorbent performance: APTES grafting on diatomite (N/Dt) and APTES xerogel growth on diatomite (NX/Dt). Specific surface area and pore volume of the functionalized diatomite were determined using surface area and pore size analysis. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) was employed to identify the functional groups on adsorbents surface whereas X-ray photoelectron spectroscopy (XPS) was used to characterize surface chemical composition. The adsorption capacity of NX/Dt adsorbent dried under air at 60 • C for formaldehyde initial concentration at 3 ppm considerably reached 53.42 mg of formaldehyde per g of adsorbent under humid air (50% of relative humidity) at 23 • C. In the same synthesis conditions, this adsorption capacity was 3000 times and 10 times higher than pure diatomite and xerogel without diatomite template, respectively. Adsorption experiments demonstrated that amine-functionalization significantly enhanced formaldehyde uptake compared to bare diatomite, underlining the critical role of surface amine groups in formaldehyde binding. A comparative analysis of the two-functionalization routes revealed measurable differences in adsorption performance, reflecting the influence of synthesis pathway on adsorbent efficiency. The study establishes APTES-xerogel modified diatomite as a promising bio-sourced candidate for formaldehyde capture, providing insights into the optimization of surface modification strategies for air purification applications.
Related
- Humidity-dependent formaldehyde adsorption on porous frameworks: A comparative study of MOFs, zeolites, and activated carbon
- Adsorption of Levofloxacin onto Chitosan- and Layered Double Hydroxide-Functionalized Montmorillonite
- Effect of Injection Molding on the Performance of EDTAD-Functionalized Oat Protein Bioplastics as Water-Absorbent Materials
- NMDG-Functionalized UiO-66 via PEI Bridging for Efficient Boron Adsorption in Salt Lake Brine.
- Glutathione-functionalized PVC for hydrogen-bonding assisted fluorescein adsorption and radical scavenging
BibTeX
@article{souissen2026development,
title = {{Development of hybrid amine-functionalized diatom-based materials for efficient formaldehyde adsorption under dry and humid conditions}},
author = {Zakia Souissen and Anaïs Becker and Fabrice Vigneron and Vasiliki Papaefthymiou and Sécou Sall and Walid Baaziz and Stéphane Le Calvé and Sana Labidi},
journal = {Chemical Engineering Journal Advances},
year = {2026},
month = oct,
doi = {10.1016/j.ceja.2026.101342},
url = {https://hal.science/hal-05846165v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Development of hybrid amine-functionalized diatom-based materials for efficient formaldehyde adsorption under dry and humid conditions
AU - Zakia Souissen
AU - Anaïs Becker
AU - Fabrice Vigneron
AU - Vasiliki Papaefthymiou
AU - Sécou Sall
AU - Walid Baaziz
AU - Stéphane Le Calvé
AU - Sana Labidi
PY - 2026
DA - 2026/10/30
JO - Chemical Engineering Journal Advances
DO - 10.1016/j.ceja.2026.101342
UR - https://hal.science/hal-05846165v1
AB - Diatomite was functionalized with 3-aminopropyltriethoxysilane (APTES) to develop efficient adsorbents for formaldehyde removal. Two APTES grafting strategies were used to optimize adsorbent performance: APTES grafting on diatomite (N/Dt) and APTES xerogel growth on diatomite (NX/Dt). Specific surface area and pore volume of the functionalized diatomite were determined using surface area and pore size analysis. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) was employed to identify the functional groups on adsorbents surface whereas X-ray photoelectron spectroscopy (XPS) was used to characterize surface chemical composition. The adsorption capacity of NX/Dt adsorbent dried under air at 60 • C for formaldehyde initial concentration at 3 ppm considerably reached 53.42 mg of formaldehyde per g of adsorbent under humid air (50% of relative humidity) at 23 • C. In the same synthesis conditions, this adsorption capacity was 3000 times and 10 times higher than pure diatomite and xerogel without diatomite template, respectively. Adsorption experiments demonstrated that amine-functionalization significantly enhanced formaldehyde uptake compared to bare diatomite, underlining the critical role of surface amine groups in formaldehyde binding. A comparative analysis of the two-functionalization routes revealed measurable differences in adsorption performance, reflecting the influence of synthesis pathway on adsorbent efficiency. The study establishes APTES-xerogel modified diatomite as a promising bio-sourced candidate for formaldehyde capture, providing insights into the optimization of surface modification strategies for air purification applications.
SN - 2666-8211
ER -