Antifouling properties of ZnO nanorods coating on micropatterned polymers
4 affiliations
- 1Department of Marine Science and Fisheries, College of Agriculture and Marine Sciences, Sultan Qaboos University, Muscat, Oman
- 2UNESCO Chair in Marine Biotechnology, Centre of Excellence in Marine Biotechnology, Sultan Qaboos University, Muscat, Oman
- 3Nanotechnology Research Center, Sultan Qaboos University, Muscat, Oman
- 4Department of Physics, College of Science, Sultan Qaboos University, Muscat, Oman
Abstract
Biofouling remains a major challenge for submerged materials in marine and industrial environments, reducing performance and increasing maintenance costs. In this study, zinc oxide nanorod (ZnO NR) coatings with dual-scale surface roughness were fabricated on three distinct 3D micropatterned surfaces, designated as D1, D2, and D3. The antifouling performance of the engineered surfaces was evaluated against the bacterium Escherichia coli and the diatom Amphora sp. under laboratory flow conditions, while acute toxicity was assessed using larvae of Litopenaeus vannamei. Fourier transform infrared (FTIR) spectroscopy confirmed the presence of Zn–O stretching vibrations, particularly on the ZnO NR-coated D2 and D3 surfaces. Water contact angle measurements showed that the ZnO NR-coated surfaces were superhydrophobic (≈150–165°) because of their hierarchical micro/nanostructures, whereas the non-coated surfaces exhibited moderate wettability (≈80–90°). ZnO coating reduced bacterial attachment by 60.3%, 48.8%, and 5.8% on the D1, D2, and D3 surfaces, respectively. Diatom coverage was reduced by 9.9%, 72.9%, and 71.8% on the corresponding ZnO-coated surfaces. The enhanced antifouling performance was associated with the combined effects of Zn2+ ions, ROS generation, surface wettability, and micro/nanotopography. The non-coated D1 and D2 surfaces, together with the ZnO-coated D1 surface, exhibited no significant toxicity toward shrimp larvae. In contrast, the ZnO-coated D3 surface exhibited relatively low antifouling performance and higher larval toxicity. Among the tested surfaces, the ZnO-coated D1 micropattern demonstrated the best overall performance by combining high antifouling efficacy with low toxicity. Post-characterization SEM analysis confirmed that the ZnO nanorod coatings remained structurally intact after biological testing, indicating good coating stability under the experimental conditions. These findings demonstrate that combining ZnO nanorod coatings with micropatterned surface topography is a promising strategy for antifouling applications. However, further long-term field evaluations and comprehensive ecotoxicological studies are required to assess the environmental performance of these coatings.
Related
- Upcycling Recycled PET into High-Performance Polyurethane Coating and Engineering Materials: Effect of NCO Index on Mechanical, Stability, and Surface Properties
- Mesoporous silica–coated gold nanorods functionalized with the D3 peptide and loaded with epigallocatechin-3-gallate reduce β-amyloid toxicity in the presence of Zn(II) ions
- Fibronectin-Assisted Coating of Low-Molecular-Weight Fucoidan Creates a Biomimetic Interface for Endothelialization of Cobalt-Chromium Stents
- Single-Particle STORM Imaging Quantifies Coating Heterogeneity Among Cell Membrane-Coated Nanoparticles
- Phage cocktail-loaded hydrogel coating prevents the biofilm formation of MDR Acinetobacter baumannii on indwelling medical devices
BibTeX
@article{albusaidi2026antifouling,
title = {{Antifouling properties of ZnO nanorods coating on micropatterned polymers}},
author = {Azhar Al-Busaidi and Sergey Dobretsov and Htet Htet Kyaw and Myo Tay Zar Myint},
journal = {PLOS One},
year = {2026},
month = sep,
doi = {10.1371/journal.pone.0357826},
url = {https://doi.org/10.1371/journal.pone.0357826},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Antifouling properties of ZnO nanorods coating on micropatterned polymers
AU - Azhar Al-Busaidi
AU - Sergey Dobretsov
AU - Htet Htet Kyaw
AU - Myo Tay Zar Myint
PY - 2026
DA - 2026/09/18
JO - PLOS One
DO - 10.1371/journal.pone.0357826
UR - https://doi.org/10.1371/journal.pone.0357826
AB - Biofouling remains a major challenge for submerged materials in marine and industrial environments, reducing performance and increasing maintenance costs. In this study, zinc oxide nanorod (ZnO NR) coatings with dual-scale surface roughness were fabricated on three distinct 3D micropatterned surfaces, designated as D1, D2, and D3. The antifouling performance of the engineered surfaces was evaluated against the bacterium Escherichia coli and the diatom Amphora sp. under laboratory flow conditions, while acute toxicity was assessed using larvae of Litopenaeus vannamei. Fourier transform infrared (FTIR) spectroscopy confirmed the presence of Zn–O stretching vibrations, particularly on the ZnO NR-coated D2 and D3 surfaces. Water contact angle measurements showed that the ZnO NR-coated surfaces were superhydrophobic (≈150–165°) because of their hierarchical micro/nanostructures, whereas the non-coated surfaces exhibited moderate wettability (≈80–90°). ZnO coating reduced bacterial attachment by 60.3%, 48.8%, and 5.8% on the D1, D2, and D3 surfaces, respectively. Diatom coverage was reduced by 9.9%, 72.9%, and 71.8% on the corresponding ZnO-coated surfaces. The enhanced antifouling performance was associated with the combined effects of Zn2+ ions, ROS generation, surface wettability, and micro/nanotopography. The non-coated D1 and D2 surfaces, together with the ZnO-coated D1 surface, exhibited no significant toxicity toward shrimp larvae. In contrast, the ZnO-coated D3 surface exhibited relatively low antifouling performance and higher larval toxicity. Among the tested surfaces, the ZnO-coated D1 micropattern demonstrated the best overall performance by combining high antifouling efficacy with low toxicity. Post-characterization SEM analysis confirmed that the ZnO nanorod coatings remained structurally intact after biological testing, indicating good coating stability under the experimental conditions. These findings demonstrate that combining ZnO nanorod coatings with micropatterned surface topography is a promising strategy for antifouling applications. However, further long-term field evaluations and comprehensive ecotoxicological studies are required to assess the environmental performance of these coatings.
SN - 1932-6203
ER -