Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards
- 1Department of Civil, Geological, and Environmental Engineering, University of Saskatchewan, Saskatoon, SK Canada
Abstract
Characterizing the in situ hydrogeologic properties of aquitards is difficult due to their low hydraulic conductivity (K) and slow response times. Consequently, numerical models often rely on laboratory determined values for geotechnical and hydrogeological parameters, which may be unreliable due to sample disturbance. This study shows that fully grouted, vibrating wire pressure transducers (VWPs) can be used to estimate the in situ compressibility (α), specific storage (SS), and in situ horizontal hydraulic conductivity (Kh) of overconsolidated aquitards by analyzing pore pressure responses to barometric pressure fluctuations and post-installation recovery. While these methods have been used in shallow or short-term studies, their application in deeper, low-K formations with long-term monitoring remains limited. This study presents results from 34 VWPs installed across five boreholes at a single site (site 2) and compares them with previously published data from a similar site (site 1) in the Williston Basin (WB) where the methods were first developed and tested. The dataset provides a rare, high-resolution record of pore pressure behavior in glacial till and Cretaceous shale over monitoring periods of up to 16 years. The findings demonstrate the reproducibility of the methods across different lithologies and support their use in estimating representative hydraulic parameters for regional-scale models. This work adds to the growing body of research supporting in situ methods for aquitard characterization and highlights the value of long-term monitoring in improving the understanding of low-K systems in sedimentary basins.
Related
- Effects of biochar and vermicompost application on the physicochemical properties of acidic soils in Sidama Region, Ethiopia
- Separation of Source, Site, and Path Effects Based on Elastic Radiative Transfer Theory. Part 1: Mapping of Scattering and Absorption Properties and Application to Metropolitan France
- From burial to barrier: how burial history controls the hydraulic conductivity in argillaceous formations
- Effects of chemical fertilizer application on soil properties, banana ( Musa paradisiaca ) yields, and soil microbiomes in a long-term cultivation field
- From real-time to long-term source apportionment of PM 10 using high-time-resolution measurements of aerosol physical properties: methodology and example application at an urban background site (Aosta, Italy)
BibTeX
@article{smith2026application,
title = {{Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards}},
author = {Laura A. Smith},
journal = {Hydrogeology Journal},
year = {2026},
month = may,
doi = {10.1007/s10040-026-03091-6},
url = {https://doi.org/10.1007/s10040-026-03091-6},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards
AU - Laura A. Smith
PY - 2026
DA - 2026/05/27
JO - Hydrogeology Journal
DO - 10.1007/s10040-026-03091-6
UR - https://doi.org/10.1007/s10040-026-03091-6
AB - Characterizing the in situ hydrogeologic properties of aquitards is difficult due to their low hydraulic conductivity (K) and slow response times. Consequently, numerical models often rely on laboratory determined values for geotechnical and hydrogeological parameters, which may be unreliable due to sample disturbance. This study shows that fully grouted, vibrating wire pressure transducers (VWPs) can be used to estimate the in situ compressibility (α), specific storage (SS), and in situ horizontal hydraulic conductivity (Kh) of overconsolidated aquitards by analyzing pore pressure responses to barometric pressure fluctuations and post-installation recovery. While these methods have been used in shallow or short-term studies, their application in deeper, low-K formations with long-term monitoring remains limited. This study presents results from 34 VWPs installed across five boreholes at a single site (site 2) and compares them with previously published data from a similar site (site 1) in the Williston Basin (WB) where the methods were first developed and tested. The dataset provides a rare, high-resolution record of pore pressure behavior in glacial till and Cretaceous shale over monitoring periods of up to 16 years. The findings demonstrate the reproducibility of the methods across different lithologies and support their use in estimating representative hydraulic parameters for regional-scale models. This work adds to the growing body of research supporting in situ methods for aquitard characterization and highlights the value of long-term monitoring in improving the understanding of low-K systems in sedimentary basins.
SN - 1431-2174
SN - 1435-0157
ER -