Skip to content
DraconiticResearch
Search Sources API
197,768 studies31 sourcesUpdated 50 min ago
Peer-reviewedCC BY 4.0Scientific Reports

Valorizing palm date wastes for supercapacitor electrode synthesis and evaluation

Abstract

Climate and energy issues continue to drive researchers to develop fossil-free energy technologies that are both sustainable and scalable. In this work, date seeds (DS) are used to produce activated carbon (DSAC), which is then used as a supercapacitor electrode. The synthesis method uses KOH activation coupled with argon-gas flow calcination at 950 °C. The produced DSAC has a high specific surface area of 1374 m ² /g and a turbostratic microporous structure (pore size = 1.14 nm), in addition to oxygen-containing functional groups (–C–O–, –OH). The DSAC electrochemical performance exhibits an electric double-layer capacitor (EDLC) with a minor pseudocapacitive contribution and delivers a 3-electrode specific capacitance of 1800 F/g at 4 A/g (estimated full-device specific capacitance is 450 F/g, energy, and power densities: 40 Wh/kg and 1440 W/kg, respectively). These numbers are remarkably higher than the current state-of-the-art carbon supercapacitor findings. Furthermore, it retains 83.3% of its initial discharge capacity after 2000 galvanostatic charge-discharge cycles at 10 A/g. Finally, the DSAC electrode performance is slightly enhanced with increasing the KOH concentration from 1 M to 3 M.

Related

  1. Freestanding MoS2@Mn-NiO@rGO network composite electrode for high-energy flexible asymmetric supercapacitor applications
    Yared Solomon Worku, Hassan Shabbir, Nithyadharseni Palaniyandy +3
    Journal of Energy StoragePeer-reviewedCC BY-NC5 citedMaterials & polymersOpenAlex
  2. Novel single-crystal enaminone ligand-activated carbon composite for efficient supercapacitor electrode application
    Houria Lakhdari, Chafia Ait Ramdane-Terbouche, Achour Terbouche +3
    Journal of Molecular StructurePeer-reviewedCC BY-NC 4.0Full textMaterials & polymersHAL
  3. Neutral Electrocatalytic Ammonia Synthesis from Nitrate over a Cu2O-Co(OH)2 Composite Electrode
    Shuang Yuan, Xinyu Cui, Hongtao Xie +2
    CatalystsPeer-reviewedCC BY 4.0CatalysisCrossref
  4. Evaluation of carbon-capped PtNi nanoparticles supported on graphitized carbon black – from rotating disk electrode to unit proton exchange membrane fuel cell operated at 95 °C
    Quentin Labarde, Clémence Marty, Thomas Gaumont +7
    Electrochimica ActaPeer-reviewedCC BY 4.0Full text4 citedMaterials & polymersHAL
  5. Purification impact on structural relaxation phenomena in biopolyesters from tomato peel agro-wastes
    Jules Trubert, Laurent Delbreilh, Bénédicte Bakan +2
    Physical Chemistry Chemical PhysicsPeer-reviewedLicence not statedMaterials & polymersHAL
BibTeX
@article{mostafa2026valorizing,
  title = {{Valorizing palm date wastes for supercapacitor electrode synthesis and evaluation}},
  author = {Amany Mostafa and Sodky H. Mohammed and Nouby M. Ghazaly and Ahmed ElSheikh},
  journal = {Scientific Reports},
  year = {2026},
  month = oct,
  doi = {10.1038/s41598-026-63280-x},
  url = {https://www.nature.com/articles/s41598-026-63280-x},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Valorizing palm date wastes for supercapacitor electrode synthesis and evaluation
AU  - Amany Mostafa
AU  - Sodky H. Mohammed
AU  - Nouby M. Ghazaly
AU  - Ahmed ElSheikh
PY  - 2026
DA  - 2026/10/12
JO  - Scientific Reports
DO  - 10.1038/s41598-026-63280-x
UR  - https://www.nature.com/articles/s41598-026-63280-x
AB  - Climate and energy issues continue to drive researchers to develop fossil-free energy technologies that are both sustainable and scalable. In this work, date seeds (DS) are used to produce activated carbon (DSAC), which is then used as a supercapacitor electrode. The synthesis method uses KOH activation coupled with argon-gas flow calcination at 950 °C. The produced DSAC has a high specific surface area of 1374 m ² /g and a turbostratic microporous structure (pore size = 1.14 nm), in addition to oxygen-containing functional groups (–C–O–, –OH). The DSAC electrochemical performance exhibits an electric double-layer capacitor (EDLC) with a minor pseudocapacitive contribution and delivers a 3-electrode specific capacitance of 1800 F/g at 4 A/g (estimated full-device specific capacitance is 450 F/g, energy, and power densities: 40 Wh/kg and 1440 W/kg, respectively). These numbers are remarkably higher than the current state-of-the-art carbon supercapacitor findings. Furthermore, it retains 83.3% of its initial discharge capacity after 2000 galvanostatic charge-discharge cycles at 10 A/g. Finally, the DSAC electrode performance is slightly enhanced with increasing the KOH concentration from 1 M to 3 M.
SN  - 2045-2322
ER  -