Microwave-assisted activated carbon from waste compressed wood for efficient PFOS removal under neutral pH conditions
- 1Faculty of Environment, Department of Environmental Engineering, University of Tehran, Tehran, Iran
- 2b Institute of Biological Sciences, University of Malaya, Kuala Lumpur, Malaysia
Abstract
Perfluorooctanesulfonic acid (PFOS) is a persistent fluorinated contaminant that presents serious challenges for water treatment due to its chemical stability and mobility. In this study, a sustainable activated carbon was synthesized from discarded compressed wood through phosphoric acid impregnation followed by microwave assisted activation. Response surface methodology was applied to optimize both the synthesis conditions and the adsorption process. The optimized synthesis produced an adsorbent with a high specific surface area of 1226 m² g⁻¹, well developed mesoporosity, and abundant oxygen and phosphorus containing surface functionalities. Adsorption optimization identified a contact time of 4.82 h, adsorbent dosage of 1.95 g L⁻¹, and natural solution pH of 7.0 as the optimal operating conditions, achieving a PFOS removal efficiency of 97.87 percent at an initial PFOS concentration of 5 mg L⁻¹. Adsorption equilibrium was best described by the nonlinear Langmuir isotherm with a maximum adsorption capacity of 60.85 mg g⁻¹, while adsorption kinetics followed a pseudo second order model, indicating surface controlled interactions. The adsorbent also exhibited excellent regeneration performance, maintaining more than 95 percent of its removal efficiency after multiple reuse cycles. The combination of waste derived precursor utilization, rapid microwave assisted synthesis, high removal efficiency under neutral pH conditions, and strong reusability highlights the potential of this material as a practical and scalable adsorbent for PFOS remediation in water and wastewater treatment systems.
Related
- Rapid and Efficient Extraction of Chlorogenic Acid from Honeysuckle Using Microwave-Assisted Deep Eutectic Solvents: Process Optimization and Mechanistic Investigation via Integration of Experiments and Density Functional Theory Calculations
- Oxidation of ferrous iron in aerobic and anoxic conditions in activated sludge systems
- Preparation of Alkyl N-Alkylphosphonamidates by the Microwave-Assisted Selective Monoaminolysis of Dialkyl Phosphites.
- Understanding the Relationship Between Synthetic Conditions and H ₂ Uptake Capacity in Oxidatively Activated Turbostratic Carbons through Machine Learning
- Greener deprotection pathways: microwave assisted aqueous deprotection of N-Boc amines.
BibTeX
@article{ardebilipour2026microwaveassisted,
title = {{Microwave-assisted activated carbon from waste compressed wood for efficient PFOS removal under neutral pH conditions}},
author = {Mona Ardebilipour and Mahdi Maleki Lonbar and Ghufran Redzwan and Majid Baghdadi},
journal = {Environmental Technology \& Innovation},
year = {2026},
month = jun,
doi = {10.1016/j.eti.2026.105048},
url = {https://doi.org/10.1016/j.eti.2026.105048},
note = {CC BY-NC-ND},
}
RIS
TY - JOUR
TI - Microwave-assisted activated carbon from waste compressed wood for efficient PFOS removal under neutral pH conditions
AU - Mona Ardebilipour
AU - Mahdi Maleki Lonbar
AU - Ghufran Redzwan
AU - Majid Baghdadi
PY - 2026
DA - 2026/06/12
JO - Environmental Technology & Innovation
DO - 10.1016/j.eti.2026.105048
UR - https://doi.org/10.1016/j.eti.2026.105048
AB - Perfluorooctanesulfonic acid (PFOS) is a persistent fluorinated contaminant that presents serious challenges for water treatment due to its chemical stability and mobility. In this study, a sustainable activated carbon was synthesized from discarded compressed wood through phosphoric acid impregnation followed by microwave assisted activation. Response surface methodology was applied to optimize both the synthesis conditions and the adsorption process. The optimized synthesis produced an adsorbent with a high specific surface area of 1226 m² g⁻¹, well developed mesoporosity, and abundant oxygen and phosphorus containing surface functionalities. Adsorption optimization identified a contact time of 4.82 h, adsorbent dosage of 1.95 g L⁻¹, and natural solution pH of 7.0 as the optimal operating conditions, achieving a PFOS removal efficiency of 97.87 percent at an initial PFOS concentration of 5 mg L⁻¹. Adsorption equilibrium was best described by the nonlinear Langmuir isotherm with a maximum adsorption capacity of 60.85 mg g⁻¹, while adsorption kinetics followed a pseudo second order model, indicating surface controlled interactions. The adsorbent also exhibited excellent regeneration performance, maintaining more than 95 percent of its removal efficiency after multiple reuse cycles. The combination of waste derived precursor utilization, rapid microwave assisted synthesis, high removal efficiency under neutral pH conditions, and strong reusability highlights the potential of this material as a practical and scalable adsorbent for PFOS remediation in water and wastewater treatment systems.
SN - 2352-1864
ER -