Microstructure and high-temperature tensile properties of a near-eutectic Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for additive manufacturing
Abstract
This study introduces a novel Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for high-temperature applications. The design strategy leverages the alloy's near-eutectic composition to create a printable alloy with refined eutectic intermetallic reinforcements and to take advantage of the supersaturation of slow-diffusing elements (Mn, Zr, and Cr). The as-printed microstructure shows a homogeneous grain structure with coarse columnar grains. The distribution, nature, size and morphology of the intermetallic dispersoids is heterogeneous at the melt pool scale. Coarse facetted Cr-rich precipitates are only found near the melt pool boundaries while the melt pool interiors consist of a refined eutectic structure (interparticle spacing ~200 nm) with elongated, Fe-rich intermetallics (~10% in area fraction). The composition of the solid solution is also heterogeneous with higher supersaturations in Mn, Zr, and Cr in the melt pool interiors than at the melt pool boundaries. The hightemperature tensile properties of the as-printed material are evaluated from 100 to 350 • C and over four orders of magnitude in strain rate. This alloy shows a very limited decrease in yield strength between 100 and 300 • C, nearly no strain rate sensitivity, and maintains a reasonable ductility (elongation to failure ≥5%) despite a reduction in ductility at low strain rate. The role of the refined eutectic structure to confine dislocation motion and mitigate dynamic recovery is emphasized. The role of supersaturation in climb-restricting solutes such as Fe, Mn and Zr is highlighted. A mechanism to rationalize the drop in ductility at elevated temperature and low strain rate is proposed.
Related
- Additive manufacturing of a Ni-20 wt%Cr binary alloy by laser powder bed fusion: Impact of the microstructure on the mechanical properties
- A Novel Nb-Based Eutectic Superalloy with Exceptional Ultrahigh-Temperature Mechanical Properties
- Ceramic Materials: From Atomic Bonding and Processing to Microstructure, Functional Properties, and Biomedical Applications
- Impact of a protein addition on the microstructure and rheological properties of silica hydrogels
- Femtosecond Laser Direct Writing of Conductive Carbon Layers on Flexible Kapton Polyimide: A Parametric Study of Process, Microstructure, and Electrical Properties
BibTeX
@article{lenoir2026microstructure,
title = {{Microstructure and high-temperature tensile properties of a near-eutectic Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for additive manufacturing}},
author = {Tristan Lenoir and Matthieu Ricard and Béchir Chehab and Isabelle Mouton and Florence Robaut and Frédéric de Geuser and Arthur Després and Guilhem Martin},
journal = {Materials Science and Engineering: A},
year = {2026},
month = jun,
doi = {10.1016/j.msea.2026.150568},
url = {https://hal.science/hal-05763334v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Microstructure and high-temperature tensile properties of a near-eutectic Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for additive manufacturing
AU - Tristan Lenoir
AU - Matthieu Ricard
AU - Béchir Chehab
AU - Isabelle Mouton
AU - Florence Robaut
AU - Frédéric de Geuser
AU - Arthur Després
AU - Guilhem Martin
PY - 2026
DA - 2026/06/06
JO - Materials Science and Engineering: A
DO - 10.1016/j.msea.2026.150568
UR - https://hal.science/hal-05763334v1
AB - This study introduces a novel Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for high-temperature applications. The design strategy leverages the alloy's near-eutectic composition to create a printable alloy with refined eutectic intermetallic reinforcements and to take advantage of the supersaturation of slow-diffusing elements (Mn, Zr, and Cr). The as-printed microstructure shows a homogeneous grain structure with coarse columnar grains. The distribution, nature, size and morphology of the intermetallic dispersoids is heterogeneous at the melt pool scale. Coarse facetted Cr-rich precipitates are only found near the melt pool boundaries while the melt pool interiors consist of a refined eutectic structure (interparticle spacing ~200 nm) with elongated, Fe-rich intermetallics (~10% in area fraction). The composition of the solid solution is also heterogeneous with higher supersaturations in Mn, Zr, and Cr in the melt pool interiors than at the melt pool boundaries. The hightemperature tensile properties of the as-printed material are evaluated from 100 to 350 • C and over four orders of magnitude in strain rate. This alloy shows a very limited decrease in yield strength between 100 and 300 • C, nearly no strain rate sensitivity, and maintains a reasonable ductility (elongation to failure ≥5%) despite a reduction in ductility at low strain rate. The role of the refined eutectic structure to confine dislocation motion and mitigate dynamic recovery is emphasized. The role of supersaturation in climb-restricting solutes such as Fe, Mn and Zr is highlighted. A mechanism to rationalize the drop in ductility at elevated temperature and low strain rate is proposed.
SN - 0921-5093
SN - 1873-4936
ER -