Catalytic pyrolysis of spruce wood and swine manure in an auger reactor using NaCl and MgCl₂
Abstract
This work investigates the catalytic pyrolysis of spruce wood (SW) and swine manure (SM) in a pilot-scale auger reactor using two alkali and alkaline earth metal (AAEM) catalysts, namely, NaCl and MgCl₂. Experiments evaluated the effects of temperature (400–600 ◦C), N₂ flow rate (4–8 L/min), and solid residence time (75–125 s) on product properties. Temperature proved to be the main process driver. Increasing it from 400 to 600 ◦C shifted yields toward syngas, producing carbon-rich aromatic biochars with lower O/C and H/C ratios, and gas richer in CO, H₂, and CH₄. Conversely, higher N₂ flow rates decreased oily phase yields and the water content. Under identical conditions, SM pyrolysis systematically yielded more biochar and aqueous phase but less oil and syngas than SW, due to its higher ash, AAEM, and nitrogen contents. For both feedstocks, NaCl and MgCl₂ impregnation increased char and ash yields while elevating the bio-oil water content, especially with MgCl₂, in line with the promotion of dehydration reactions induced by this catalyst. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) revealed that NaCl mildly affected the properties of SW-derived biooils, yielding slightly lower average m/z, O/C and unique compounds linked to lignin/hemicellulose degradation. Conversely, MgCl₂ promoted CHO-type species detected as [M + Cl]⁻ adducts with lower oxygen counts, stemming from cellulose and hemicellulose dehydration. Both catalysts induced chlorinated species in SW and SM bio-oils, with MgCl₂ triggering denitrogenation. Finally, both AAEM chlorides seemed to promote decarboxylation and water-gas shift reactions, increasing syngas CO₂ and H₂ production at the expense of CO.
Related
- 915 MHz microwave heated fluidised-bed reactor for methane pyrolysis: Design, risk assessment and operational performance
- Effects of a Heating System on Waste Plastic Pyrolysis in a Fixed-Bed Reactor
- Pressure and temperature dependence of methane pyrolysis and hydrogen production in a micro flow reactor
- In-Situ Catalytic Pyrolysis of Polystyrene with Sewage Sludge-Derived Catalysts: Sewage Sludge Ash, Sewage Sludge Char, and Fe-Impregnated Acid-Leached Sewage Sludge Char
- Mechanistic Insights Into Sustainable Catalytic Pyrolysis of Biomass‐Derived Ferulic Acid: The Role of Alumina Regeneration
BibTeX
@article{lemaire2026catalytic,
title = {{Catalytic pyrolysis of spruce wood and swine manure in an auger reactor using NaCl and MgCl₂}},
author = {Romain Lemaire and Olivier Fischer and Jasmine Hertzog and Vincent Carré and Laura Daniela Mila-Saavedra and Stéphane Godbout and Patrick Brassard and Joahnn Palacios and Ammar Bensakhria},
journal = {Journal of Analytical and Applied Pyrolysis},
year = {2026},
month = sep,
doi = {10.1016/j.jaap.2026.108033},
url = {https://hal.univ-lorraine.fr/hal-05738239v1},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Catalytic pyrolysis of spruce wood and swine manure in an auger reactor using NaCl and MgCl₂
AU - Romain Lemaire
AU - Olivier Fischer
AU - Jasmine Hertzog
AU - Vincent Carré
AU - Laura Daniela Mila-Saavedra
AU - Stéphane Godbout
AU - Patrick Brassard
AU - Joahnn Palacios
AU - Ammar Bensakhria
PY - 2026
DA - 2026/09/04
JO - Journal of Analytical and Applied Pyrolysis
DO - 10.1016/j.jaap.2026.108033
UR - https://hal.univ-lorraine.fr/hal-05738239v1
AB - This work investigates the catalytic pyrolysis of spruce wood (SW) and swine manure (SM) in a pilot-scale auger reactor using two alkali and alkaline earth metal (AAEM) catalysts, namely, NaCl and MgCl₂. Experiments evaluated the effects of temperature (400–600 ◦C), N₂ flow rate (4–8 L/min), and solid residence time (75–125 s) on product properties. Temperature proved to be the main process driver. Increasing it from 400 to 600 ◦C shifted yields toward syngas, producing carbon-rich aromatic biochars with lower O/C and H/C ratios, and gas richer in CO, H₂, and CH₄. Conversely, higher N₂ flow rates decreased oily phase yields and the water content. Under identical conditions, SM pyrolysis systematically yielded more biochar and aqueous phase but less oil and syngas than SW, due to its higher ash, AAEM, and nitrogen contents. For both feedstocks, NaCl and MgCl₂ impregnation increased char and ash yields while elevating the bio-oil water content, especially with MgCl₂, in line with the promotion of dehydration reactions induced by this catalyst. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) revealed that NaCl mildly affected the properties of SW-derived biooils, yielding slightly lower average m/z, O/C and unique compounds linked to lignin/hemicellulose degradation. Conversely, MgCl₂ promoted CHO-type species detected as [M + Cl]⁻ adducts with lower oxygen counts, stemming from cellulose and hemicellulose dehydration. Both catalysts induced chlorinated species in SW and SM bio-oils, with MgCl₂ triggering denitrogenation. Finally, both AAEM chlorides seemed to promote decarboxylation and water-gas shift reactions, increasing syngas CO₂ and H₂ production at the expense of CO.
SN - 0165-2370
SN - 1873-250X
ER -