Pressure and temperature dependence of methane pyrolysis and hydrogen production in a micro flow reactor
Abstract
Methane pyrolysis experiments were performed in a micro flow reactor to investigate the chemical mechanism sensitivities at elevated pressures and temperatures. The micro flow reactor used in this study provides independent control over reaction parameters. Experiments were performed at temperatures from 1400 to 1800 K and pressures from 1 to 10 bar at a fixed residence time of 60 ms. The yields of hydrogen, unreacted methane, and solid carbon were quantified for comparison to predictive models. The mass of heterogeneous depositions was also quantified. The presence of C2 and PAH species were measured by GC-MS. The results were compared to 1D simulations using a discrete sectional model for capturing the kinetics of particulate formation and surface deposition. The simulations replicated the pressure trend well at high temperatures (1800 K), but the sensitivity to temperature was in disagreement. Simulations generally found lower carbon and hydrogen yields and a stronger sensitivity to temperature than the experiment. An abundance of PAH intermediates was measured at lower temperatures and higher pressures. The simulated surface deposition rates were lower than the measured values but showed similar profiles. The results demonstrate the utility of micro flow reactors in recreating pyrolysis environments for hydrogen production from methane. The predictive capabilities of simulations could be improved by advancing the fuel decomposition and PAH formation and consumption kinetics at low temperatures and by detailed treatment of surface site density.
Related
- Design and Optimization of Bottom-Hole Temperature–Pressure Combinations in Gas Production from Gas Hydrates via Carbon Dioxide Replacement Strategy
- Effect of pyrolysis temperature on the microstructure and thermal conductivity of polymer-derived monolithic and porous SiC ceramics
- Pyrolysis and Steam Reforming in Series of Footwear Waste to Hydrogen-Rich Syngas and Char for CO2 Adsorption
- Decoding the Hydrogen-Transfer Synergy in Camellia oleifera Shell Hydrochar/HDPE Co-Pyrolysis: A Kinetic and Thermodynamic Perspective
- Enhancing carbon nanotubes production from pyrolysis–catalysis of plastic waste through monolithic heating
BibTeX
@misc{razavi2026pressure,
title = {{Pressure and temperature dependence of methane pyrolysis and hydrogen production in a micro flow reactor}},
author = {Mohammad R. Razavi and Ömer L. Gülder},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.31741},
eprint = {2609.31741},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.31741},
note = {CC BY-NC-SA 4.0},
}
RIS
TY - UNPB
TI - Pressure and temperature dependence of methane pyrolysis and hydrogen production in a micro flow reactor
AU - Mohammad R. Razavi
AU - Ömer L. Gülder
PY - 2026
DA - 2026/09/23
PB - arXiv
DO - 10.48550/arxiv.2609.31741
UR - https://arxiv.org/abs/2609.31741
AB - Methane pyrolysis experiments were performed in a micro flow reactor to investigate the chemical mechanism sensitivities at elevated pressures and temperatures. The micro flow reactor used in this study provides independent control over reaction parameters. Experiments were performed at temperatures from 1400 to 1800 K and pressures from 1 to 10 bar at a fixed residence time of 60 ms. The yields of hydrogen, unreacted methane, and solid carbon were quantified for comparison to predictive models. The mass of heterogeneous depositions was also quantified. The presence of C2 and PAH species were measured by GC-MS. The results were compared to 1D simulations using a discrete sectional model for capturing the kinetics of particulate formation and surface deposition. The simulations replicated the pressure trend well at high temperatures (1800 K), but the sensitivity to temperature was in disagreement. Simulations generally found lower carbon and hydrogen yields and a stronger sensitivity to temperature than the experiment. An abundance of PAH intermediates was measured at lower temperatures and higher pressures. The simulated surface deposition rates were lower than the measured values but showed similar profiles. The results demonstrate the utility of micro flow reactors in recreating pyrolysis environments for hydrogen production from methane. The predictive capabilities of simulations could be improved by advancing the fuel decomposition and PAH formation and consumption kinetics at low temperatures and by detailed treatment of surface site density.
ER -