Skip to content
DraconiticResearch
Search Sources API
203,234 studies31 sourcesUpdated 12 min ago
Peer-reviewedCC BY 4.0ACS Omega

Porosity Engineering of Eggshell-Derived Nanostructured Hydroxyapatite for Ethanol Upgrading: Structural, Textural and Surface Characterization

4 affiliations
  1. 1UERJ , , São Francisco Xavier Street, 524 , , ,
  2. 2Pontifical Catholic University of Rio De Janeiro (PUC-Rio) , Marques De São Vicente Street, 225, São Vicente, 225, Gávea , , ,
  3. 3Instituto Nacional De Tecnologia (INT) , Avenida Venezuela, 82, Room 514 , , ,
  4. 4Foundation for the Support of the Technical School of Rio De Janeiro (FAETEC) , Clarimundo De Melo Street, 847, Quintino Bocaiuva , , ,

Abstract

Hydroxyapatite (HAp) has attracted considerable attention as a catalyst owing to its tunable acid–base properties; however, the influence of porogen-assisted synthesis on its textural characteristics and catalytic behavior remains insufficiently understood. In this work, nanostructured HAp was synthesized via a sol–gel route using calcium precursors derived from chicken eggshell waste, combining waste valorization with sustainable catalyst design. The results demonstrate a relationship between porogen-assisted modification of eggshell-derived hydroxyapatite, the resulting textural and acid–base properties, and the relative n-butanol yield obtained during relative n-butanol yield under the investigated conditions. The incorporation of pore-forming agents modified the textural properties of HAp, increasing the specific surface area from approximately 28 to 155 m2 g–1 and enhancing the pore volume. Nitrogen adsorption–desorption analyses revealed mesoporous structures with pore sizes ranging from 5 to 35 nm, while the glucose-templated sample exhibited a bimodal pore-size distribution indicative of porosity. The increase in surface area and pore accessibility improved the availability of acid–base active sites, as confirmed by NH3-TPD and CO2-TPD measurements. A structure–activity relationship was observed, with the most porous catalysts achieving relative n-butanol yields above 87%, based on normalized GC peak areas at 180 °C. Product distribution analysis based on gas chromatographic peak areas revealed enhanced relative n-butanol yields and improved selectivity toward n-butanol formation for catalysts with higher surface areas and mesoporosity. These findings demonstrate that waste-derived eggshells can be effectively converted into porous hydroxyapatite catalysts with tunable textural and acid–base properties, offering a sustainable approach for ethanol upgrading toward n-butanol.

Related

  1. Temperature dependent magnetic and structural properties of Al substituted nanostructured hexaferrites with large coercive fields
    Pierfrancesco Maltoni, Ravi Dokala, Prativa Pramanik +12
    Acta MaterialiaPeer-reviewedCC BY1 citedMaterials & polymersHAL
  2. Design and characterization of nanostructured electroactive tetraaniline prepared using alternative oxidizing systems
    Apparao Thota
    RSC advancesPeer-reviewedCC BYFull textMaterials & polymersEurope PMCPMCEurope PMC
  3. Advances in TMDs-Based Electromagnetic Wave Absorbers: From Structural Engineering to Multicomponent Synergy
    Yuefeng Yan, Anqi Lun, Boshi Gao +4
    Nano-Micro LettersPeer-reviewedCC BY5 citedMaterials & polymersOpenAlex
  4. Comparative Analysis of Starch-Based Films Functionalized with Bixa orellana Fruit and Leaf Extracts: A Multiscale Structural, Morphological, and Optical Characterization
    Moisés Gallozzo-Cárdenas, Renny Nazario-Naveda, Luis Angelats-Silva
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  5. Integrated Experimental and Computational Investigation of Fluorinated Benzoylthiourea Derivatives: Structural Characterization, Hirshfeld Surface Analysis, Antioxidant Activity, and MAO–B Inhibitory Potential for Parkinson’s Disease
    Lana Gul, Ummuhan Solmaz, Hakan Arslan
    ACS omegaPeer-reviewedCC BYFull textGeneral chemistryEurope PMC
BibTeX
@article{quizunda2026porosity,
  title = {{Porosity Engineering of Eggshell-Derived Nanostructured Hydroxyapatite for Ethanol Upgrading: Structural, Textural and Surface Characterization}},
  author = {Adilson Claudio Quizunda and Camila Alves Pelicarto Da Silva and Priscila Carvalho Borba Cardoso and Francisco José Moura and Clarissa Perdomo Rodrigues and Marilza Sampaio Aguilar and José Brant De Campos},
  journal = {ACS Omega},
  year = {2026},
  month = oct,
  doi = {10.1021/acsomega.6c08852},
  url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08852/5459053/Porosity-Engineering-of-Eggshell-Derived},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Porosity Engineering of Eggshell-Derived Nanostructured Hydroxyapatite for Ethanol Upgrading: Structural, Textural and Surface Characterization
AU  - Adilson Claudio Quizunda
AU  - Camila Alves Pelicarto Da Silva
AU  - Priscila Carvalho Borba Cardoso
AU  - Francisco José Moura
AU  - Clarissa Perdomo Rodrigues
AU  - Marilza Sampaio Aguilar
AU  - José Brant De Campos
PY  - 2026
DA  - 2026/10/27
JO  - ACS Omega
DO  - 10.1021/acsomega.6c08852
UR  - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08852/5459053/Porosity-Engineering-of-Eggshell-Derived
AB  - Hydroxyapatite (HAp) has attracted considerable attention as a catalyst owing to its tunable acid–base properties; however, the influence of porogen-assisted synthesis on its textural characteristics and catalytic behavior remains insufficiently understood. In this work, nanostructured HAp was synthesized via a sol–gel route using calcium precursors derived from chicken eggshell waste, combining waste valorization with sustainable catalyst design. The results demonstrate a relationship between porogen-assisted modification of eggshell-derived hydroxyapatite, the resulting textural and acid–base properties, and the relative n-butanol yield obtained during relative n-butanol yield under the investigated conditions. The incorporation of pore-forming agents modified the textural properties of HAp, increasing the specific surface area from approximately 28 to 155 m2 g–1 and enhancing the pore volume. Nitrogen adsorption–desorption analyses revealed mesoporous structures with pore sizes ranging from 5 to 35 nm, while the glucose-templated sample exhibited a bimodal pore-size distribution indicative of porosity. The increase in surface area and pore accessibility improved the availability of acid–base active sites, as confirmed by NH3-TPD and CO2-TPD measurements. A structure–activity relationship was observed, with the most porous catalysts achieving relative n-butanol yields above 87%, based on normalized GC peak areas at 180 °C. Product distribution analysis based on gas chromatographic peak areas revealed enhanced relative n-butanol yields and improved selectivity toward n-butanol formation for catalysts with higher surface areas and mesoporosity. These findings demonstrate that waste-derived eggshells can be effectively converted into porous hydroxyapatite catalysts with tunable textural and acid–base properties, offering a sustainable approach for ethanol upgrading toward n-butanol.
SN  - 2470-1343
ER  -