Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 48 min ago
Peer-reviewedCC BY 4.0Nanomaterials

One-Step Synthesis of Amino-Functionalized MnFe2O4 Magnetic Nanoparticles for Single-Solute Removal Adsorption of Cr(VI) and Congo Red from Water

  1. 1Key Lab of Process Analysis and Control of Sichuan Universities, Yibin University, Yibin 644000, China

Abstract

To enable removal of heavy metals and anionic dyes from industrial wastewater, amino-functionalized manganese ferrite magnetic nanoparticles (MnFe2O4–NH2, denoted as PMNx) were synthesized by a facile one-pot polyol process using ethanolamine as the amination agent. XRD, FT-IR, SEM, BET and VSM confirmed a cubic spinel MnFe2O4 phase with successful surface introduction of –NH2 groups, a porous cluster morphology (BET surface area 134.69 m2·g−1) and superparamagnetic behavior (Ms = 30.79 emu·g−1) enabling rapid magnetic recovery. The amount of ethanolamine used had a significant effect on adsorption performance, with PMN20 (20 mL of ethanolamine) exhibiting the best adsorption performance for both pollutants. Under acidic conditions (pH = 2), PMN20 achieved high removal efficiencies for both hexavalent chromium (Cr(VI)) and Congo red (CR). The adsorption kinetics of both pollutants followed the pseudo-second-order model. The adsorption of Cr(VI) is more accurately described by the Freundlich model, whereas CR follows the Langmuir model. In the temperature range of 298–318 K, the adsorption of Cr(VI) is endothermic and spontaneous, while the adsorption of CR is exothermic and spontaneous across the entire temperature range, although the adsorption efficiency decreases at higher temperatures. PMN20 exhibits good reusability; after five adsorption–desorption cycles, the removal efficiencies for Cr(VI) and CR remained at ≥85% and ≥90%, respectively. These results confirm the potential of MnFe2O4–NH2 as a low-cost, magnetically recoverable adsorbent for treating complex industrial wastewater.

Related

  1. Electrochemical Sensing of Dopamine with a Nafion-Coated Reduced Graphene Oxide/Polypyrrole-Functionalized Magnetic Nanoparticles Composite
    Afef Dhaffouli, Paul Soto-Rodríguez, Soledad Carinelli +3
    MicromachinesPeer-reviewedCC BYFull textGeneral chemistryHAL
  2. Stabilization of copper species on the functionalized magnetic metal-organic framework (Fe3O4@Zn-MOF-NH2-Cya@Cu) as a heterogeneous catalyst for synthesis of tetrahydrobenzopyran derivatives
    Zahra Amininia, Heshmatollah Alinezhad, Ameneh Kiani +1
    Scientific ReportsPeer-reviewedCC BY-NC-ND 4.0Full textOrganic chemistryCrossref
  3. Nb2CTx Mxene-supported ultrafine palladium nanoparticles for aerobic oxidation of aromatic alcohols and one-pot synthesis of functionalized heterocycles
    Muskan Deshmukh, Nikhil Dnyaneshwar Shitole, Jai Singh +3
    RSC AdvancesPeer-reviewedCC BY-NC 3.0Full textOrganic chemistryPMC
  4. Pluronic F-127-functionalized magnetic ternary hybrid nanoparticles for co-delivery of paclitaxel and psoralen: a synergistic strategy to overcome multidrug resistance in triple-negative breast cancer
    Qian Liu, Fengjie Liu, Panpan Wang +8
    Frontiers in PharmacologyPeer-reviewedCC BY 4.0Full textMaterials & polymersCrossrefPMC
  5. Ultrasonic-assisted green synthesis of schiff base-functionalized CdS nanoparticles with enhanced optical, anticancer, and antibacterial properties
    K. Subin Kumar, V. N. Reena
    Scientific ReportsPeer-reviewedCC BY 4.0Full textMaterials & polymersCrossref
BibTeX
@article{tian2026onestep,
  title = {{One-Step Synthesis of Amino-Functionalized MnFe2O4 Magnetic Nanoparticles for Single-Solute Removal Adsorption of Cr(VI) and Congo Red from Water}},
  author = {Jing Tian and Yuji Li and Rouzhen Shi and Xue Wang and Jintao Wang},
  journal = {Nanomaterials},
  year = {2026},
  month = nov,
  doi = {10.3390/nano16221451},
  url = {https://www.mdpi.com/2079-4991/16/22/1451},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - One-Step Synthesis of Amino-Functionalized MnFe2O4 Magnetic Nanoparticles for Single-Solute Removal Adsorption of Cr(VI) and Congo Red from Water
AU  - Jing Tian
AU  - Yuji Li
AU  - Rouzhen Shi
AU  - Xue Wang
AU  - Jintao Wang
PY  - 2026
DA  - 2026/11/10
JO  - Nanomaterials
DO  - 10.3390/nano16221451
UR  - https://www.mdpi.com/2079-4991/16/22/1451
AB  - To enable removal of heavy metals and anionic dyes from industrial wastewater, amino-functionalized manganese ferrite magnetic nanoparticles (MnFe2O4–NH2, denoted as PMNx) were synthesized by a facile one-pot polyol process using ethanolamine as the amination agent. XRD, FT-IR, SEM, BET and VSM confirmed a cubic spinel MnFe2O4 phase with successful surface introduction of –NH2 groups, a porous cluster morphology (BET surface area 134.69 m2·g−1) and superparamagnetic behavior (Ms = 30.79 emu·g−1) enabling rapid magnetic recovery. The amount of ethanolamine used had a significant effect on adsorption performance, with PMN20 (20 mL of ethanolamine) exhibiting the best adsorption performance for both pollutants. Under acidic conditions (pH = 2), PMN20 achieved high removal efficiencies for both hexavalent chromium (Cr(VI)) and Congo red (CR). The adsorption kinetics of both pollutants followed the pseudo-second-order model. The adsorption of Cr(VI) is more accurately described by the Freundlich model, whereas CR follows the Langmuir model. In the temperature range of 298–318 K, the adsorption of Cr(VI) is endothermic and spontaneous, while the adsorption of CR is exothermic and spontaneous across the entire temperature range, although the adsorption efficiency decreases at higher temperatures. PMN20 exhibits good reusability; after five adsorption–desorption cycles, the removal efficiencies for Cr(VI) and CR remained at ≥85% and ≥90%, respectively. These results confirm the potential of MnFe2O4–NH2 as a low-cost, magnetically recoverable adsorbent for treating complex industrial wastewater.
SN  - 2079-4991
ER  -