Comparative Analysis of Cohesive Laws for Predicting Stress Fields in Perforated Fiber Metal Laminates
- 1Mechanical Engineering Department, College of Engineering, Alasala Colleges, Dammam 31483, Saudi Arabia
- 2Department of Mechanical Engineering, College of Engineering, Qassim University, Buraydah 51452, Saudi Arabia
- 3Department of Production Engineering, Beni Suef University, Beni Suef 62521, Egypt
Abstract
Fiber–metal laminates (FMLs) are hybrid structures manufactured using alternating layers of aluminium alloy and epoxy-reinforced E-glass fabric, with the stacking sequence [Al/Glass/Al/Glass/Al], offering high specific strength, fatigue resistance, and damage tolerance. However, structural cutouts generate stress concentrations that can significantly affect the mechanical performance and damage behavior of these hybrid polymer-based laminates. This study develops and validates analytical cohesive zone models (CZMs) for predicting stress fields around circular and elliptical cutouts in FML plates, providing a computationally efficient analysis. Tensile specimens with two thicknesses (1.4 and 1.7 mm) were investigated using two cohesive laws: linear, and exponential softening. Model predictions were assessed against experimental results using stress concentration factors. The exponential cohesive law provided the best overall agreement, with Root Mean Square Error (RMSE) values of 24.87 and 20.99 MPa and R2 values of 0.281 and 0.311 for the 1.4 and 1.7 mm laminates, respectively. Experimental stress concentration factors ranged from 1.88–3.70 and 2.04–3.51 for the two thicknesses. Elliptical cutouts aligned with the loading direction produced lower stress concentrations, whereas minor-axis alignment resulted in higher concentrations. Increasing laminate thickness improved prediction accuracy. The proposed analytical CZM provides an efficient approach for evaluating stress concentrations and damage-related behaviour in perforated polymer-based FMLs, with potential application in the design and optimization of lightweight composite structures.
Related
- Comparative Impact Response, Damage, and Healing Performance of CFRP Laminates with Different Thicknesses and Reinforcement Architectures
- Predicting rate of penetration (ROP) with machine learning models: A physics-validated comparative case study of Gradient Boosting Regressor (GBR), Random Forest (RF), and K-Nearest Neighbours (KNN)
- Experimental Study on Static Strength and Fatigue of CNT-Modified CFRP Laminates
- Increasing Adhesion via Strong Dipoles: Oxazolidinone-containing Polyolefins as Nonreactive Tie Layers in Polymer Laminates
- Experimental and Numerical Investigation of End-Tab Geometry Effects on the Compressive Response of Ultra-Thick CFRP Laminates
BibTeX
@article{abdellah2026comparative,
title = {{Comparative Analysis of Cohesive Laws for Predicting Stress Fields in Perforated Fiber Metal Laminates}},
author = {Mohammed Y. Abdellah and Osama M. Irfan and Hanafy M. Omar},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18192419},
url = {https://europepmc.org/article/PMC/PMC13666816},
note = {CC BY},
}
RIS
TY - JOUR
TI - Comparative Analysis of Cohesive Laws for Predicting Stress Fields in Perforated Fiber Metal Laminates
AU - Mohammed Y. Abdellah
AU - Osama M. Irfan
AU - Hanafy M. Omar
PY - 2026
DA - 2026/10/01
JO - Polymers
DO - 10.3390/polym18192419
UR - https://europepmc.org/article/PMC/PMC13666816
AB - Fiber–metal laminates (FMLs) are hybrid structures manufactured using alternating layers of aluminium alloy and epoxy-reinforced E-glass fabric, with the stacking sequence [Al/Glass/Al/Glass/Al], offering high specific strength, fatigue resistance, and damage tolerance. However, structural cutouts generate stress concentrations that can significantly affect the mechanical performance and damage behavior of these hybrid polymer-based laminates. This study develops and validates analytical cohesive zone models (CZMs) for predicting stress fields around circular and elliptical cutouts in FML plates, providing a computationally efficient analysis. Tensile specimens with two thicknesses (1.4 and 1.7 mm) were investigated using two cohesive laws: linear, and exponential softening. Model predictions were assessed against experimental results using stress concentration factors. The exponential cohesive law provided the best overall agreement, with Root Mean Square Error (RMSE) values of 24.87 and 20.99 MPa and R2 values of 0.281 and 0.311 for the 1.4 and 1.7 mm laminates, respectively. Experimental stress concentration factors ranged from 1.88–3.70 and 2.04–3.51 for the two thicknesses. Elliptical cutouts aligned with the loading direction produced lower stress concentrations, whereas minor-axis alignment resulted in higher concentrations. Increasing laminate thickness improved prediction accuracy. The proposed analytical CZM provides an efficient approach for evaluating stress concentrations and damage-related behaviour in perforated polymer-based FMLs, with potential application in the design and optimization of lightweight composite structures.
SN - 2073-4360
ER -