Skip to content
DraconiticResearch
Search Sources API
203,203 studies31 sourcesUpdated 36 min ago
Peer-reviewedCC BY-NC 4.0Construction and Building Materials

Experimental and numerical investigation of accelerated carbonation of recycled fines

Abstract

The purpose of this study is to perform an experimental and numerical study of accelerated carbonation of recycled fines (RF) to assess its potential and kinetics of CO2 uptake and to estimate its interest in a solicitous field of construction environmental impact. First, a parametric study of accelerated carbonation is carried out on RF, varying the following parameters: water content (1, 7, and 25%), fine size (50 μm and 80 μm), carbonation duration (1, 3, 8, 14, 17, and 24 h), CO2 concentration (18 and 100%), and heating temperature of recycled fine (500 °C). Then, the experimental results are used to calibrate a numerical model to simulate the accelerated carbonation of RF in the second step. The experimental and numerical results show the influence of each parameter on the degree of carbonation of the RF. The optimal water content for CO2 uptake is 7%. The CO2 uptake of the finer RF (50 µm) is faster than that of the larger RF (80 µm).

Related

  1. Experimental and Numerical Investigation of End-Tab Geometry Effects on the Compressive Response of Ultra-Thick CFRP Laminates
    Yue Chen, Xu Liang, Liqun Tian +4
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  2. Mechanical Performance of Bio-Based Additively Manufactured Honeycomb Sandwich Panels: Experimental and Numerical Investigation
    Mahyar Fazeli, Tirtha Sen Gupta, Siddharth Jayaprakash +3
    ACS OmegaPeer-reviewedCC BY 4.0Full textGeneral chemistryCrossref
  3. Experimental and Numerical Investigation of the Interfacial Bonding in Multi-Material Fused-Filament Fabrication Using Mode-I Fracture Toughness
    Ermias Wubete Fenta, Mohd Tauheed, Sarfaraz Ahmed Furquan +1
    PolymersPeer-reviewedCC BY 4.0Full textMaterials & polymersCrossrefEurope PMC
  4. Experimental and Numerical Investigation of Orthotropic CFR-PEEK and Ti-6Al-4V Osteosynthesis Plates Using a Multiscale Finite Element Modeling Approach
    Madina Isametova, Sholpan Kurmanova, Nurgul Seiitkazy +3
    PolymersPeer-reviewedCC BY 4.0Materials & polymersCrossref
  5. Mechanistic Insights into Zinc Acetate Dihydrate–Catalyzed Depolymerization of Recycled PET for Polyol Production: A Combined Experimental and DFT Study
    Panachai Thusanaphoom, Nismar Parneam, Sineenard Songsri +6
    Journal of Molecular StructurePeer-reviewedCC BY 4.0Full textSystems & synthetic biologyGeneral chemistryHAL
BibTeX
@article{algourdin2026experimental,
  title = {{Experimental and numerical investigation of accelerated carbonation of recycled fines}},
  author = {Nonna Algourdin and K. Si Larbi and I. Santos and Zyed Mesticou and Pierre Pimienta and Nicolas Pinoteau and Amir Si Larbi},
  journal = {Construction and Building Materials},
  year = {2026},
  month = sep,
  doi = {10.1016/j.conbuildmat.2023.131286},
  url = {https://hal.science/hal-04589678v1},
  note = {CC BY-NC 4.0},
}
RIS
TY  - JOUR
TI  - Experimental and numerical investigation of accelerated carbonation of recycled fines
AU  - Nonna Algourdin
AU  - K. Si Larbi
AU  - I. Santos
AU  - Zyed Mesticou
AU  - Pierre Pimienta
AU  - Nicolas Pinoteau
AU  - Amir Si Larbi
PY  - 2026
DA  - 2026/09/23
JO  - Construction and Building Materials
DO  - 10.1016/j.conbuildmat.2023.131286
UR  - https://hal.science/hal-04589678v1
AB  - The purpose of this study is to perform an experimental and numerical study of accelerated carbonation of recycled fines (RF) to assess its potential and kinetics of CO2 uptake and to estimate its interest in a solicitous field of construction environmental impact. First, a parametric study of accelerated carbonation is carried out on RF, varying the following parameters: water content (1, 7, and 25%), fine size (50 μm and 80 μm), carbonation duration (1, 3, 8, 14, 17, and 24 h), CO2 concentration (18 and 100%), and heating temperature of recycled fine (500 °C). Then, the experimental results are used to calibrate a numerical model to simulate the accelerated carbonation of RF in the second step. The experimental and numerical results show the influence of each parameter on the degree of carbonation of the RF. The optimal water content for CO2 uptake is 7%. The CO2 uptake of the finer RF (50 µm) is faster than that of the larger RF (80 µm).
SN  - 0950-0618
SN  - 1879-0526
ER  -