Mechanical Performance of Bio-Based Additively Manufactured Honeycomb Sandwich Panels: Experimental and Numerical Investigation
- 1Aalto University , , ,
- 2Aalto University , , P.O. Box 12150, ,
Abstract
Honeycomb-core sandwich structures offer excellent strength-to-weight performance, making them well-suited for lightweight and sustainable engineering applications. This study investigates the mechanical behavior of bio-based, three-dimensional printed honeycomb sandwich panels using numerical analysis. A finite element (FE) model was developed to simulate three-point bending tests on hexagonal honeycomb cores fabricated from bioepoxy materials with plywood face sheets. The numerical predictions were validated against experimental data from mechanical testing of the printed specimens. The effects of key geometric parameters, including core height, panel width, cell size, and face sheet thickness, on structural stiffness and load-bearing capacity were systematically assessed. A progressive damage model predicted the peak load within 0.6% and captured the postpeak failure behavior. Increasing the core height from three to four printed layers proportionally improved bending stiffness. Similarly, the 2.3 mm face sheet configuration reached a maximum load of 1526 N, more than twice the 705 N of the 1.0 mm sheet. Smaller 15 mm cells exhibited higher absolute stiffness (75.2 N/mm) than 45 mm cells (63.1 N/mm), though the coarser cells showed 78% higher specific stiffness and were the more mass-efficient design, while increasing panel width from 32 mm to 40 mm enhanced stiffness by around 25%. These findings demonstrate the potential of combining additive manufacturing with bio-based materials to produce sustainable sandwich structures with tunable mechanical properties.
Related
- Mechanical and Thermomechanical Performance Evaluation of CFRP Sandwich Structures with Additively Manufactured Composite Cores
- Influence of Post-Processing by Annealing on Additive Manufacturing Productivity and Mechanical Properties in Three-Point Bending of Additively Manufactured Specimens from PETG and Recycled PETG
- Experimental and Numerical Analysis of the Strain Response of Additively Manufactured Composites
- Mechanical and Thermomechanical Response of Co-Cured QFRP Sandwich Structures with Additively Manufactured Fibre-Reinforced Gyroid Cores
- Comparative study of the rotating bending fatigue performance of wire arc additively manufactured hollow shafts with and without TIG pre-joining
BibTeX
@article{fazeli2026mechanical,
title = {{Mechanical Performance of Bio-Based Additively Manufactured Honeycomb Sandwich Panels: Experimental and Numerical Investigation}},
author = {Mahyar Fazeli and Tirtha Sen Gupta and Siddharth Jayaprakash and Hossein Baniasadi and Ville Kokkonen and Juha Lipponen},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c07673},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c07673/5461464/Mechanical-Performance-of-Bio-Based-Additively},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Mechanical Performance of Bio-Based Additively Manufactured Honeycomb Sandwich Panels: Experimental and Numerical Investigation
AU - Mahyar Fazeli
AU - Tirtha Sen Gupta
AU - Siddharth Jayaprakash
AU - Hossein Baniasadi
AU - Ville Kokkonen
AU - Juha Lipponen
PY - 2026
DA - 2026/10/30
JO - ACS Omega
DO - 10.1021/acsomega.6c07673
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c07673/5461464/Mechanical-Performance-of-Bio-Based-Additively
AB - Honeycomb-core sandwich structures offer excellent strength-to-weight performance, making them well-suited for lightweight and sustainable engineering applications. This study investigates the mechanical behavior of bio-based, three-dimensional printed honeycomb sandwich panels using numerical analysis. A finite element (FE) model was developed to simulate three-point bending tests on hexagonal honeycomb cores fabricated from bioepoxy materials with plywood face sheets. The numerical predictions were validated against experimental data from mechanical testing of the printed specimens. The effects of key geometric parameters, including core height, panel width, cell size, and face sheet thickness, on structural stiffness and load-bearing capacity were systematically assessed. A progressive damage model predicted the peak load within 0.6% and captured the postpeak failure behavior. Increasing the core height from three to four printed layers proportionally improved bending stiffness. Similarly, the 2.3 mm face sheet configuration reached a maximum load of 1526 N, more than twice the 705 N of the 1.0 mm sheet. Smaller 15 mm cells exhibited higher absolute stiffness (75.2 N/mm) than 45 mm cells (63.1 N/mm), though the coarser cells showed 78% higher specific stiffness and were the more mass-efficient design, while increasing panel width from 32 mm to 40 mm enhanced stiffness by around 25%. These findings demonstrate the potential of combining additive manufacturing with bio-based materials to produce sustainable sandwich structures with tunable mechanical properties.
SN - 2470-1343
ER -