Vacuum Heat Treatment Regulates the Bamboo–Epoxy Interface: Balancing Mechanical Performance and Thermal Stability
- 1School of Packaging and Materials Engineering, Hunan University of Technology, Zhuzhou 412007, China
Abstract
The sustainable replacement of conventional synthetic-fiber composites requires renewable reinforcements that combine low density with high load-bearing capability. However, the hydrophilic nature of bamboo restricts effective stress transfer at the bamboo–epoxy interface, while excessive thermal modification can further compromise the structural integrity of the reinforcement. Here, a vacuum-thermal interfacial regulation strategy was employed to establish a favorable balance between interfacial strengthening and thermally induced structural degradation. Moderate treatment improved resin coverage and interfacial contact while preserving the bamboo structure, thereby promoting efficient stress transfer across the bamboo–epoxy interface. Owing to this synergistic interfacial regulation, the composite treated at 160 °C for 4 h achieved tensile and flexural strengths of 174.49 and 219.55 MPa, corresponding to improvements of 49.60% and 29.47%, respectively, over the untreated composite, while excessive treatment caused renewed interfacial defects and mechanical deterioration. Meanwhile, vacuum heat treatment also enhanced thermal stability, increasing T5% from 216.55 to 260.08 °C and the residual mass at 500 °C from 24.18% to 28.28%. These results reveal a processing-window mechanism governed by the competition between interfacial strengthening and thermal degradation, providing an effective route for developing high-performance and sustainable bamboo/epoxy composites.
Related
- Balancing the Performance Trade-off of Polymer Blends with Heterogeneously Dispersed Nanodomains via Reactive Processing
- Balancing performance and sustainability in integrated CO₂ capture and methanation via NiCeO₂-anionic clay hybrid materials
- Branched-type nanocluster-junction fluorofluidic-gels for interface-adaptive thermal conduction and mechanical resistance
- Sustainable quinoa production in Morocco: balancing productivity and environmental performance
- Balancing Structural Ordering and Electrochemical Performance in LiNi0.94Co0.06O2 Cathodes via PVA-Assisted Synthesis
BibTeX
@article{liang2026vacuum,
title = {{Vacuum Heat Treatment Regulates the Bamboo–Epoxy Interface: Balancing Mechanical Performance and Thermal Stability}},
author = {Zilu Liang and Haiyun Jiang and Yimin Tan},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18202511},
url = {https://www.mdpi.com/2073-4360/18/20/2511},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Vacuum Heat Treatment Regulates the Bamboo–Epoxy Interface: Balancing Mechanical Performance and Thermal Stability
AU - Zilu Liang
AU - Haiyun Jiang
AU - Yimin Tan
PY - 2026
DA - 2026/10/14
JO - Polymers
DO - 10.3390/polym18202511
UR - https://www.mdpi.com/2073-4360/18/20/2511
AB - The sustainable replacement of conventional synthetic-fiber composites requires renewable reinforcements that combine low density with high load-bearing capability. However, the hydrophilic nature of bamboo restricts effective stress transfer at the bamboo–epoxy interface, while excessive thermal modification can further compromise the structural integrity of the reinforcement. Here, a vacuum-thermal interfacial regulation strategy was employed to establish a favorable balance between interfacial strengthening and thermally induced structural degradation. Moderate treatment improved resin coverage and interfacial contact while preserving the bamboo structure, thereby promoting efficient stress transfer across the bamboo–epoxy interface. Owing to this synergistic interfacial regulation, the composite treated at 160 °C for 4 h achieved tensile and flexural strengths of 174.49 and 219.55 MPa, corresponding to improvements of 49.60% and 29.47%, respectively, over the untreated composite, while excessive treatment caused renewed interfacial defects and mechanical deterioration. Meanwhile, vacuum heat treatment also enhanced thermal stability, increasing T5% from 216.55 to 260.08 °C and the residual mass at 500 °C from 24.18% to 28.28%. These results reveal a processing-window mechanism governed by the competition between interfacial strengthening and thermal degradation, providing an effective route for developing high-performance and sustainable bamboo/epoxy composites.
SN - 2073-4360
ER -