Millisecond phonon lifetimes in piezoelectric nanomechanical resonators
Abstract
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×108 (f· Qi > 1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
Related
- Dispersive mode coupling in p-doped semiconductor nanomechanical resonators
- All-dry processing of 3C-SiC nanomechanical string resonators for extreme aspect ratios and high intrinsic quality factor
- Integrating spin glass dynamics into nanomechanical resonators
- 1/f frequency-noise reduction in nanomechanical resonators by dissipation dilution
- Lithography-free, apodized thickness-shear LiNbO3 resonators for piezoelectric DC-DC power conversion
BibTeX
@misc{hitchcock2026millisecond,
title = {{Millisecond phonon lifetimes in piezoelectric nanomechanical resonators}},
author = {Oliver A. Hitchcock and Matthew P. Maksymowych and Kaveh Pezeshki and Takuma Makihara and Erik Szakiel and Chou-Wei Kiang and Daniel Rugar and Amir H. Safavi-Naeini},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.10700},
eprint = {2610.10700},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.10700},
}
RIS
TY - UNPB
TI - Millisecond phonon lifetimes in piezoelectric nanomechanical resonators
AU - Oliver A. Hitchcock
AU - Matthew P. Maksymowych
AU - Kaveh Pezeshki
AU - Takuma Makihara
AU - Erik Szakiel
AU - Chou-Wei Kiang
AU - Daniel Rugar
AU - Amir H. Safavi-Naeini
PY - 2026
DA - 2026/10/07
PB - arXiv
DO - 10.48550/arxiv.2610.10700
UR - https://arxiv.org/abs/2610.10700
AB - Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×10^8 (f· Q_i > 10^18) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
ER -