Skip to content
DraconiticResearch
Search Sources API
197,788 studies31 sourcesUpdated 52 min ago
Peer-reviewedCC BY-NCRSC advances

A ciprofloxacin-functionalized NH₂-UiO-66 metal-organic framework for pH-switchable dual spectrophotometric detection of As(iii) and Fe(ii): mechanistic insights, DFT validation, and water analysis.

4 affiliations
  1. 1Department of Chemistry, Faculty of Science, University of Tabuk Tabuk 71491 Saudi Arabia.
  2. 2Department of Chemistry, College of Science, Northern Border University Arar 73222 Saudi Arabia.
  3. 3Department of Chemistry, College of Science, Princess Nourah Bint Abdulrahman University P. O. Box 84428 Riyadh 11671 Saudi Arabia.
  4. 4Egyptian Propylene and Polypropylene Company Port Said 42511 Egypt [email protected].

Abstract

Arsenic(iii) and iron(ii) are two of the most harmful inorganic pollutants that occur naturally in water environments and commercially in industrial settings; therefore, when they both appear simultaneously, there have been long-lasting issues for both human health and aquatic ecosystems. A functionalized metal-organic framework composite known as CIP-UiO-66 has been synthesized through post-synthetic modification of NH₂-UiO-66(Zr) with ciprofloxacin (CIP) using glutaraldehyde-mediated Schiff-base condensation. The properties of the newly developed material were investigated using several analytical techniques including powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption-desorption analysis, scanning electron microscopy combined with energy-dispersive X-ray analysis (SEM-EDX), elemental mapping, and two-dimensional correlation spectroscopy (2D-COS FT-IR). The BET specific surface area of CIP-UiO-66 was found to be 906.42 m² g⁻¹, with a pore size distribution having a maximum centered around 1.17 nm and a total pore volume of 4.15 cm³ g⁻¹. These results suggest that the synthesized material possesses a hierarchical micro-mesoporous structure that provides adequate space for analyte confinement and rapid transport. A dual detection system that responds to changes in pH has been designed as a means of improving the accuracy of spectrophotometric measurements of arsenic(iii) at pH 7.0 and iron(ii) at pH 6.0 on a single composite substrate. The optimum conditions of operation for the dual detection system have been determined, resulting in two linear response regions for each analyte: As(iii) from 0.0175 to 0.10 ppm (R ² = 0.9989) and Fe(ii) from 0.0106 to 0.08 ppm (R ² = 0.9993). In addition, low-detection limits have been observed for both analytes: 1.75 × 10⁻² ppm (17.5 µg L⁻¹) for As(iii) and 1.06 × 10⁻² ppm (10.6 µg L⁻¹) for Fe(ii). Although the LOD for Fe(ii) is significantly lower than the reference value of 300 µg L⁻¹ for Fe(ii) in drinking water, the LOD for As(iii) is higher than the reference value of 10 µg L⁻¹ for As(iii) in drinking water. Both analytes reach signal equilibrium within 10 minutes. Selectivity was tested against twelve different co-existing cations at equivalent molar ratios as interferences; additionally, DFT studies were performed to obtain mechanistic insights into the differing interactions of As(iii) and Fe(ii) with the sensing ligand. A decrease in the HOMO-LUMO energy difference was observed as a result of coordination; with an energy difference of 0.1580 hartree being found in the case of the uncoordinated ligand and 0.1424 hartree in the case of GA-CIP@As³⁺ and 0.1089 hartree in the case of GA-CIP@Fe²⁺. A validation of the real sample was performed on tap water and boiler water which showed recovery percentages of 98.13-101.33% (using the developed methodology) and was supported by ICP-OES results indicating that the methodology has both a high level of accuracy and potential to be applied to practical applications. It has been shown that the CIP-UiO-66 sensor can maintain its performance after six regeneration cycles showing that it is a durable, portable, and capable platform for simultaneously monitoring trace metals within complex environmental samples.

Related

  1. A novel pyridine-functionalized naphthoxazine: thermal stability, proton and metal ion-responsive optical sensing, and biological activity with DFT validation.
    Abdulsalam Mahdy, Jalal A Zahra, Randa N Haddadin +2
    BMC chemistryPeer-reviewedCC BYFull textMaterials & polymersEurope PMCDOAJ
  2. First Application of 3,5-Dinitrocatechol and Benzalkonium Chloride in Cloud Point Extraction: Spectrophotometric Determination of Vanadium(V)
    Petya Racheva, Antoaneta Saravanska, Andrea Gajdošová +4
    Molecules (Basel, Switzerland)Peer-reviewedCC BYFull textGeneral chemistryEurope PMC
  3. Sustainable nanomedicine from olive leaf waste: biosynthesized ZnONPs with mechanistic validation against hepatocellular carcinoma.
    Yasmin Mounir Mohamaden, Seham S El-Hawary, Esmail M El-Fakharany +6
    RSC advancesPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  4. Solid-phase extraction of organic dyes using a nickel trimesinate-based hybrid metal-organic framework combined with spectrophotometric determination
    I. Е. Uflyand, V. N. Naumkina, A. Y. Litvinova +3
    Scientific ReportsPeer-reviewedCC BY 4.0Full textAnalytical chemistryCrossref
  5. Eco-sustainable organic solvent-free spectrophotometric method for the concurrent determination of a ternary pharmaceutical mixture.
    Abdallah M Hamdy, Esraa M Meselhy, Magda M El Henawee +2
    BMC chemistryPeer-reviewedCC BY-NC-NDFull textAnalytical chemistryEurope PMCDOAJ
BibTeX
@article{alatawi2026ciprofloxacinfunctionalized,
  title = {{A ciprofloxacin-functionalized NH₂-UiO-66 metal-organic framework for pH-switchable dual spectrophotometric detection of As(iii) and Fe(ii): mechanistic insights, DFT validation, and water analysis.}},
  author = {Raedah A S Alatawi and Nawaa Ali H Alshammari and Nadia H Elsayed and Maymounah N Alharthi and Duna A K Alenazi and Abeer Abdulaziz H Bukhari and Menier Al-Anazi and M A M El-Afify},
  journal = {RSC advances},
  year = {2026},
  month = oct,
  doi = {10.1039/d6ra06564c},
  url = {https://europepmc.org/article/MED/42851895},
  note = {CC BY-NC},
}
RIS
TY  - JOUR
TI  - A ciprofloxacin-functionalized NH₂-UiO-66 metal-organic framework for pH-switchable dual spectrophotometric detection of As(iii) and Fe(ii): mechanistic insights, DFT validation, and water analysis.
AU  - Raedah A S Alatawi
AU  - Nawaa Ali H Alshammari
AU  - Nadia H Elsayed
AU  - Maymounah N Alharthi
AU  - Duna A K Alenazi
AU  - Abeer Abdulaziz H Bukhari
AU  - Menier Al-Anazi
AU  - M A M El-Afify
PY  - 2026
DA  - 2026/10/08
JO  - RSC advances
DO  - 10.1039/d6ra06564c
UR  - https://europepmc.org/article/MED/42851895
AB  - Arsenic(iii) and iron(ii) are two of the most harmful inorganic pollutants that occur naturally in water environments and commercially in industrial settings; therefore, when they both appear simultaneously, there have been long-lasting issues for both human health and aquatic ecosystems. A functionalized metal-organic framework composite known as CIP-UiO-66 has been synthesized through post-synthetic modification of NH₂-UiO-66(Zr) with ciprofloxacin (CIP) using glutaraldehyde-mediated Schiff-base condensation. The properties of the newly developed material were investigated using several analytical techniques including powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption-desorption analysis, scanning electron microscopy combined with energy-dispersive X-ray analysis (SEM-EDX), elemental mapping, and two-dimensional correlation spectroscopy (2D-COS FT-IR). The BET specific surface area of CIP-UiO-66 was found to be 906.42 m² g⁻¹, with a pore size distribution having a maximum centered around 1.17 nm and a total pore volume of 4.15 cm³ g⁻¹. These results suggest that the synthesized material possesses a hierarchical micro-mesoporous structure that provides adequate space for analyte confinement and rapid transport. A dual detection system that responds to changes in pH has been designed as a means of improving the accuracy of spectrophotometric measurements of arsenic(iii) at pH 7.0 and iron(ii) at pH 6.0 on a single composite substrate. The optimum conditions of operation for the dual detection system have been determined, resulting in two linear response regions for each analyte: As(iii) from 0.0175 to 0.10 ppm (R ² = 0.9989) and Fe(ii) from 0.0106 to 0.08 ppm (R ² = 0.9993). In addition, low-detection limits have been observed for both analytes: 1.75 × 10⁻² ppm (17.5 µg L⁻¹) for As(iii) and 1.06 × 10⁻² ppm (10.6 µg L⁻¹) for Fe(ii). Although the LOD for Fe(ii) is significantly lower than the reference value of 300 µg L⁻¹ for Fe(ii) in drinking water, the LOD for As(iii) is higher than the reference value of 10 µg L⁻¹ for As(iii) in drinking water. Both analytes reach signal equilibrium within 10 minutes. Selectivity was tested against twelve different co-existing cations at equivalent molar ratios as interferences; additionally, DFT studies were performed to obtain mechanistic insights into the differing interactions of As(iii) and Fe(ii) with the sensing ligand. A decrease in the HOMO-LUMO energy difference was observed as a result of coordination; with an energy difference of 0.1580 hartree being found in the case of the uncoordinated ligand and 0.1424 hartree in the case of GA-CIP@As³⁺ and 0.1089 hartree in the case of GA-CIP@Fe²⁺. A validation of the real sample was performed on tap water and boiler water which showed recovery percentages of 98.13-101.33% (using the developed methodology) and was supported by ICP-OES results indicating that the methodology has both a high level of accuracy and potential to be applied to practical applications. It has been shown that the CIP-UiO-66 sensor can maintain its performance after six regeneration cycles showing that it is a durable, portable, and capable platform for simultaneously monitoring trace metals within complex environmental samples.
SN  - 2046-2069
ER  -