Topography-Driven Liquid Repellency in PFAS-Free Spherical-Particle Coating
- 1University of Massachusetts, Lowell, Massachusetts 01854, United States
- 2Shenkar College of Engineering and Art, Ramat Gan 5252626, Israel
- 3United States Army Combat Capabilities Development Command Soldier Center (DEVCOM SC), Natick, Massachusetts 01760, United States
Abstract
The development of PFAS-free (per- and polyfluoroalkyl substances), liquid-repellent surfaces require a fundamental understanding of how surface geometry governs wetting-state stability. However, the independent role of interparticle spacing remains poorly understood because it is often coupled with changes in particle size, surface chemistry, or hierarchical morphology. Here, we present a geometry-driven strategy to systematically investigate the influence of spacing using re-entrant spherical architectures with controlled spacing ratios. Monodisperse 1 μm silica particles were immobilized within an epoxy matrix, while sacrificial 1 μm polystyrene spheres served as inert spacers to precisely tune interparticle distance without altering particle size or surface chemistry. After spacer removal and conformal hydrophobic silanization, wetting behavior was evaluated using ethanol–water mixtures with surface tensions ranging from 71.93 to 22.28 mN m–1. The apparent contact angle exhibits a nonmonotonic dependence on spacing ratio for liquids with surface tensions above approximately 25 mN m–1, reflecting a critical trade-off between reduced solid–liquid contact fraction, which enhances repellency, and diminished Cassie–Baxter state stability, which promotes wetting transition. As surface tension decreases, the optimal spacing ratio shifts toward smaller values, indicating increasingly stringent geometric requirements for sustaining the suspended wetting state. A theoretical framework integrating the Cassie–Baxter and Wenzel models with a breakthrough-pressure criterion quantitatively captures the experimental trends. These findings establish predictive design rules for geometry-controlled wetting and provide a scalable pathway for engineering high-performance, PFAS-free liquid-repellent coatings.
Related
- Free-particle Green's function matrix elements over spherical Gaussian and plane-wave-modulated Gaussian basis functions
- Preparation of Eugenol-Containing Epoxy–Siloxane Polymers for Coating Materials
- In situ fabricated Zn-ZnO@HA coating on magnesium alloy with robust adhesion, superior anticorrosion, and osteogenic activity
- Design meets simplicity: employing anhydrous precursors in microwave synthesis of NaGdF₄:Yb³⁺,Tm³⁺ upconverting nanoparticles and their deposition inside mesoporous titania or silica thin films through spin-coating
- Improved interfacial-bonding strength and electronic structure properties of graphene-reinforced Al composites by Cu coating.
BibTeX
@article{scheff2026topographydriven,
title = {{Topography-Driven Liquid Repellency in PFAS-Free Spherical-Particle Coating}},
author = {Talya A. Scheff and Jinde Zhang and Hanna Dodiuk and Samuel Kenig and Margaret A. Auerbach and Timothy J. Lawton and Joey Mead},
journal = {Langmuir},
year = {2026},
month = oct,
doi = {10.1021/acs.langmuir.6c03964},
url = {https://doi.org/10.1021/acs.langmuir.6c03964},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Topography-Driven Liquid Repellency in PFAS-Free Spherical-Particle Coating
AU - Talya A. Scheff
AU - Jinde Zhang
AU - Hanna Dodiuk
AU - Samuel Kenig
AU - Margaret A. Auerbach
AU - Timothy J. Lawton
AU - Joey Mead
PY - 2026
DA - 2026/10/14
JO - Langmuir
DO - 10.1021/acs.langmuir.6c03964
UR - https://doi.org/10.1021/acs.langmuir.6c03964
AB - The development of PFAS-free (per- and polyfluoroalkyl substances), liquid-repellent surfaces require a fundamental understanding of how surface geometry governs wetting-state stability. However, the independent role of interparticle spacing remains poorly understood because it is often coupled with changes in particle size, surface chemistry, or hierarchical morphology. Here, we present a geometry-driven strategy to systematically investigate the influence of spacing using re-entrant spherical architectures with controlled spacing ratios. Monodisperse 1 μm silica particles were immobilized within an epoxy matrix, while sacrificial 1 μm polystyrene spheres served as inert spacers to precisely tune interparticle distance without altering particle size or surface chemistry. After spacer removal and conformal hydrophobic silanization, wetting behavior was evaluated using ethanol–water mixtures with surface tensions ranging from 71.93 to 22.28 mN m–1. The apparent contact angle exhibits a nonmonotonic dependence on spacing ratio for liquids with surface tensions above approximately 25 mN m–1, reflecting a critical trade-off between reduced solid–liquid contact fraction, which enhances repellency, and diminished Cassie–Baxter state stability, which promotes wetting transition. As surface tension decreases, the optimal spacing ratio shifts toward smaller values, indicating increasingly stringent geometric requirements for sustaining the suspended wetting state. A theoretical framework integrating the Cassie–Baxter and Wenzel models with a breakthrough-pressure criterion quantitatively captures the experimental trends. These findings establish predictive design rules for geometry-controlled wetting and provide a scalable pathway for engineering high-performance, PFAS-free liquid-repellent coatings.
SN - 0743-7463
SN - 1520-5827
ER -