Fabrication and characterization of a micro-boiling meter for heat transfer measurements on a single nucleation site
Abstract
Accurate characterization of heat transfer during pool boiling requires sensors capable of resolving rapid transients and highly localized thermal events. Conventional approaches often suffer from limited spatial resolution and slow thermal response due to intermediate material layers. To overcome these limitations and obtain accurate measurements of surface temperature and heat flux during pool boiling studies, we used a boiling meter. Two of these consist of commercially available sensors. To improve the study of vapor bubble dynamics, a third boiling meter was designed, dimensioned, and microfabricated. It was fabricated on a Borofloat 33-silicon composite substrate featuring a suspended Borofloat membrane with a central 200 μm micropillar and a laser-ablated nucleation site (100 μm x 115 μm). Two platinum resistance temperature detectors (Pt-RTDs) were integrated on both sides of the substrate to enable direct, localized, and time-resolved measurements of wall temperature and heat flux during bubble formation. Characterization of the microfabricated boiling meter was carried out in controlled radiative environment and in pool boiling. The microfabricated device exhibited a thermal characteristic time of around 200 ms in radiative tests (more than 30 times shorter under similar operating conditions than the times found with boiling meters composed of commercial sensors), but was able to capture a bubble frequency of 26 Hz, which validates its ability to resolve transient thermal events. Its suspended glass-membrane structure, combined with the direct liquid-RTD interface, provides both high temporal resolution and spatial sensitivity, essential for capturing the short timescales of bubble nucleation, growth, and departure.
Related
- Enhanced performance of organic light photodetectors based on poly (vinyl alcohol) supported with fluorescein dye and graphene nanosheets: fabrication, characterization, and thermometric measurements
- Physics-informed Kolmogorov-Arnold networks (PIKANs) for noise-robust reconstruction of boiling heat flux from infrared measurements
- Interface-resolved simulations of boiling heat transfer
- Versatile Sleeve-and-Bulk Fabrication of Inversely Designed Nanophotonic Structures with High Pattern Transfer Fidelity
- Fabrication and characterization of multi-shell nested fully annular quasi-ellipsoidal focusing mirrors with m=3 supermirrors for small-angle neutron scattering
BibTeX
@misc{kharkwal2026fabrication,
title = {{Fabrication and characterization of a micro-boiling meter for heat transfer measurements on a single nucleation site}},
author = {Himanshi Kharkwal and S. K. H. Shah and Laurent Robert and Jean-Marc Cote and Eric Gavignet and Sébastien Euphrasie and François Lanzetta and Lounès Tadrist and Magali Barthès},
howpublished = {arXiv},
year = {2026},
month = nov,
doi = {10.48550/arxiv.2611.00057},
eprint = {2611.00057},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2611.00057},
}
RIS
TY - UNPB
TI - Fabrication and characterization of a micro-boiling meter for heat transfer measurements on a single nucleation site
AU - Himanshi Kharkwal
AU - S. K. H. Shah
AU - Laurent Robert
AU - Jean-Marc Cote
AU - Eric Gavignet
AU - Sébastien Euphrasie
AU - François Lanzetta
AU - Lounès Tadrist
AU - Magali Barthès
PY - 2026
DA - 2026/11/01
PB - arXiv
DO - 10.48550/arxiv.2611.00057
UR - https://arxiv.org/abs/2611.00057
AB - Accurate characterization of heat transfer during pool boiling requires sensors capable of resolving rapid transients and highly localized thermal events. Conventional approaches often suffer from limited spatial resolution and slow thermal response due to intermediate material layers. To overcome these limitations and obtain accurate measurements of surface temperature and heat flux during pool boiling studies, we used a boiling meter. Two of these consist of commercially available sensors. To improve the study of vapor bubble dynamics, a third boiling meter was designed, dimensioned, and microfabricated. It was fabricated on a Borofloat 33-silicon composite substrate featuring a suspended Borofloat membrane with a central 200 μm micropillar and a laser-ablated nucleation site (100 μm x 115 μm). Two platinum resistance temperature detectors (Pt-RTDs) were integrated on both sides of the substrate to enable direct, localized, and time-resolved measurements of wall temperature and heat flux during bubble formation. Characterization of the microfabricated boiling meter was carried out in controlled radiative environment and in pool boiling. The microfabricated device exhibited a thermal characteristic time of around 200 ms in radiative tests (more than 30 times shorter under similar operating conditions than the times found with boiling meters composed of commercial sensors), but was able to capture a bubble frequency of 26 Hz, which validates its ability to resolve transient thermal events. Its suspended glass-membrane structure, combined with the direct liquid-RTD interface, provides both high temporal resolution and spatial sensitivity, essential for capturing the short timescales of bubble nucleation, growth, and departure.
ER -