Effects of Corner Radius and Knudsen Number on Rarefied Gas Flow in a Lid-Driven Cavity
Abstract
Finite corner curvature is commonly omitted when rarefied cavity flows are represented using idealised geometries. This study examines how downstream corner rounding affects lid-driven cavity flow over 0.5 ≤ Kn ≤ 5. Direct simulation Monte Carlo calculations were performed for normalised corner radii of Rc = 0, 0.10 and 0.20. The model was assessed through published benchmark data and a local grid-sensitivity test. Velocity fields, centreline profiles, area-averaged speed, translational temperature, number density and temperature anisotropy were analysed. A single primary vortex persisted across all cases. Corner rounding modified the local turning of the downstream return flow but caused little change in the wider circulation. The root-mean-square differences between the rounded and sharp-cornered centreline velocity profiles remained below 0.007. The area-averaged normalised speed increased in all rounded configurations, with a maximum change of approximately 2.5%. The thermodynamic response showed a stronger dependence on rarefaction. Corner rounding reduced the mean temperature non-uniformity at Kn = 0.5 and 1, but increased it at Kn = 2 and 5. Changes in the mean density deviation remained within approximately 1.3%, while the mean translational-temperature anisotropy varied from about -3% to 2.4%. The results show that the sharp-corner approximation captures the global velocity structure under the conditions studied, but can omit local flow changes and small thermodynamic responses associated with finite corner curvature.
Related
- What does anti-Fourier heat-flux agreement validate? Observability of the fourth-order closure state in a rarefied lid-driven cavity
- Electrically driven Rabi dynamics of magnetic-field-induced corner states in a two-dimensional topological insulator
- Flow and transport characteristics of hydrogen in a square-spiral Knudsen pump with coupled thermal transpiration and Poiseuille flow
- Analysis of the rarefied flow at micro-step using a DeepONet surrogate model with a physics-guided zonal loss function
- Transcription rate dynamics and RNA copy number noise: General relations and data-driven predictions
BibTeX
@misc{yan2026effects,
title = {{Effects of Corner Radius and Knudsen Number on Rarefied Gas Flow in a Lid-Driven Cavity}},
author = {Peiliang Yan and Chuang Wen},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.28151},
eprint = {2609.28151},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.28151},
}
RIS
TY - UNPB
TI - Effects of Corner Radius and Knudsen Number on Rarefied Gas Flow in a Lid-Driven Cavity
AU - Peiliang Yan
AU - Chuang Wen
PY - 2026
DA - 2026/09/23
PB - arXiv
DO - 10.48550/arxiv.2609.28151
UR - https://arxiv.org/abs/2609.28151
AB - Finite corner curvature is commonly omitted when rarefied cavity flows are represented using idealised geometries. This study examines how downstream corner rounding affects lid-driven cavity flow over 0.5 ≤ Kn ≤ 5. Direct simulation Monte Carlo calculations were performed for normalised corner radii of Rc = 0, 0.10 and 0.20. The model was assessed through published benchmark data and a local grid-sensitivity test. Velocity fields, centreline profiles, area-averaged speed, translational temperature, number density and temperature anisotropy were analysed. A single primary vortex persisted across all cases. Corner rounding modified the local turning of the downstream return flow but caused little change in the wider circulation. The root-mean-square differences between the rounded and sharp-cornered centreline velocity profiles remained below 0.007. The area-averaged normalised speed increased in all rounded configurations, with a maximum change of approximately 2.5%. The thermodynamic response showed a stronger dependence on rarefaction. Corner rounding reduced the mean temperature non-uniformity at Kn = 0.5 and 1, but increased it at Kn = 2 and 5. Changes in the mean density deviation remained within approximately 1.3%, while the mean translational-temperature anisotropy varied from about -3% to 2.4%. The results show that the sharp-corner approximation captures the global velocity structure under the conditions studied, but can omit local flow changes and small thermodynamic responses associated with finite corner curvature.
ER -