Unexpected Thickness-Driven Volume Expansion in Tunicate Cellulose Nanocrystal-Based Multilayer Films
Abstract
Cellulose nanocrystals are rod-like nanoparticles obtained from different cellulose sources (plants, bacteria, algae, or tunicates) and represent a class of renewable, biodegradable, and mechanically robust nanomaterials with great potential for the design of advanced functional materials. In this study, we report on the preparation of multilayer composites based on tunicate cellulose nanocrystals and poly(vinyl amine) using the layer-by-layer assembly technique. The assembly of these nanostructured films was characterized by ellipsometry. Surprisingly, films composed of tunicin nanocrystals and poly(vinyl amine) showed a highly unusual film growth behavior by dipping, spray- and spin-assisted assembly, and grazing incidence spraying methods, which contrasted with previous reports. When the film thickness reached approximately 50–60 nm, the deposition of additional layers induced a sharp increase in thickness that nearly doubled the volume of the film by expansion in the direction normal to the surface. This behavior was also observed by atomic force microscopy, ruling out any optical artifact due to ellipsometry. Ellipsometry measurements revealed that this thickness jump (i) was independent of the assembly conditions, (ii) was associated with an increase in film porosity, and (iii) clearly correlated with the aspect ratio and rigidity of the tunicate cellulose nanocrystals. This unexpected phenomenon was not observed for films assembled from either shorter cellulose nanocrystals extracted from cotton or wood, or from longer and more flexible cellulose nanofibrils in combination with poly(vinyl amine). Such a pronounced structural transition has never been previously observed, and its origin remains unexplained despite the experiments performed to date.
Related
- Supramolecular modulation of the mechanical properties of amino acid-functionalized cellulose nanocrystal films
- Mechanical Reinforcement and Early-Stage Deterioration of Cellulose Nanocrystal-Reinforced Isosorbide-Based Polycarbonate Nanocomposites Under Humid Soil Exposure
- Multiscale Rheo-Optical and Scattering Signatures of Deformation-Induced Anisotropy in Aqueous Cellulose Nanocrystal Suspensions under Large-Amplitude Oscillatory Shear.
- Water- and Alkali-Stable Cellulose Nanocrystal Films via Synergistic Citric Acid Cross-Linking and Poly(vinyl alcohol) Incorporation for Hydroxide-Conducting Membranes
- Tight binding of optically innocent bisphosphonate ligands to robust Tb3+-doped HfO2 nanocrystal surfaces
BibTeX
@article{garnier2026unexpected,
title = {{Unexpected Thickness-Driven Volume Expansion in Tunicate Cellulose Nanocrystal-Based Multilayer Films}},
author = {Leïla Garnier and Jean Muller and Pelinsu Demir and Labonno Azad and Pavithra Wijeratne and Christophe Contal and Christine Lancelon-Pin and Michel Tschopp and Yann Battie and Gero Decher and Matthias Pauly and Jean-Luc Putaux and Bruno Jean and Olivier Felix},
journal = {ACS Materials Au},
year = {2026},
month = aug,
doi = {10.1021/acsmaterialsau.6c00047},
url = {https://univoak.hal.science/hal-05758081v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Unexpected Thickness-Driven Volume Expansion in Tunicate Cellulose Nanocrystal-Based Multilayer Films
AU - Leïla Garnier
AU - Jean Muller
AU - Pelinsu Demir
AU - Labonno Azad
AU - Pavithra Wijeratne
AU - Christophe Contal
AU - Christine Lancelon-Pin
AU - Michel Tschopp
AU - Yann Battie
AU - Gero Decher
AU - Matthias Pauly
AU - Jean-Luc Putaux
AU - Bruno Jean
AU - Olivier Felix
PY - 2026
DA - 2026/08/21
JO - ACS Materials Au
DO - 10.1021/acsmaterialsau.6c00047
UR - https://univoak.hal.science/hal-05758081v1
AB - Cellulose nanocrystals are rod-like nanoparticles obtained from different cellulose sources (plants, bacteria, algae, or tunicates) and represent a class of renewable, biodegradable, and mechanically robust nanomaterials with great potential for the design of advanced functional materials. In this study, we report on the preparation of multilayer composites based on tunicate cellulose nanocrystals and poly(vinyl amine) using the layer-by-layer assembly technique. The assembly of these nanostructured films was characterized by ellipsometry. Surprisingly, films composed of tunicin nanocrystals and poly(vinyl amine) showed a highly unusual film growth behavior by dipping, spray- and spin-assisted assembly, and grazing incidence spraying methods, which contrasted with previous reports. When the film thickness reached approximately 50–60 nm, the deposition of additional layers induced a sharp increase in thickness that nearly doubled the volume of the film by expansion in the direction normal to the surface. This behavior was also observed by atomic force microscopy, ruling out any optical artifact due to ellipsometry. Ellipsometry measurements revealed that this thickness jump (i) was independent of the assembly conditions, (ii) was associated with an increase in film porosity, and (iii) clearly correlated with the aspect ratio and rigidity of the tunicate cellulose nanocrystals. This unexpected phenomenon was not observed for films assembled from either shorter cellulose nanocrystals extracted from cotton or wood, or from longer and more flexible cellulose nanofibrils in combination with poly(vinyl amine). Such a pronounced structural transition has never been previously observed, and its origin remains unexplained despite the experiments performed to date.
SN - 2694-2461
ER -